B7E30A

Specification Of B7E30A

General
Device Type	Hard drive array
Chassis
Installed Devices / Modules Qty	25
Supported Devices / Modules Qty	25
Supported Drives	SAS-2
Storage
Total Array Capacity	22.5 TB
HDD Array External Interface	iSCSI (10 GbE)
Processor
CPU	2 x Xeon 2 GHz
RAM
Installed Size	64 GB
Storage Controller
Type	RAID
Cache / Buffer Size (Max)	2 GB
RAID Level	RAID 5, RAID 6, RAID 10
Hard Drive
Type	HDD - hot-swap
Capacity	25 x 900 GB
Interface Type	SAS 6Gb/s
Spindle Speed	10000 rpm
Expansion / Connectivity
Expansion Bays	25 (total) / 0 (free) x hot-swap - 2.5" SFF | 2 hot-swap - 2.5" SFF
Expansion Slots	2 (total) / 0 (free) x processor | 16 x memory - DIMM 240-pin | 2 x PCI Express 3.0 | X expansion slot | 1 (total) / 0 (free) x FlexibleLOM | 1 (total) / 1 (free) x microSDHC
Interfaces	2 x Ethernet 10Gb
Miscellaneous
Cables Included	2 x Serial ATA / SAS cable - 6.6 ft
Software Included	LeftHand SAN/iQ Storage Clustering, LeftHand SAN/iQ Network RAID, LeftHand SAN/iQ Thin Provisioning, LeftHand SAN/iQ Snapshots, LeftHand SAN/iQ Remote Copy, LeftHand SAN/iQ Multi-Site/DR Solution Pack, HP Smart Array Advanced Pack 2.0
Compliant Standards	FCC Class A certified, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, RoHS, FCC CFR47 Part 15, IEC 60950-1, EN 60950-1, WEEE, BSMI CNS 13438
Power
Power Device	2 x internal power supply - hot-plug
Max Supported Qty	2
Power Redundancy	Yes
Power Redundancy Scheme	1+1
Voltage Required	AC 120/230 V
Manufacturer Warranty
Service & Support	Limited warranty - 3 years
Environmental Parameters
Min Operating Temperature	50 °F
Max Operating Temperature	95 °F
Humidity Range Operating	10 - 90% (non-condensing)