Overview Of iDS-2CD7046G0/E-IHSY(/F11)(R)
No Data FoundSpecification Of iDS-2CD7046G0/E-IHSY(/F11)(R)
iDS-2CD7046G0/E-IHSY(/F11)(R) Datasheet
iDS-2CD7046G0/E-IHSY(/F11)(R) Specification
iDS-2CD7046G0/E-IHSY(/F11)(R) Specification |
- Camera
- Image Sensor1/1.8″ Progressive Scan CMOS
- Min. IlluminationColor: 0.002 Lux @ (F1.4, AGC ON); B/W: 0.002 Lux @ (F1.4, AGC ON)
- Shutter Speed1 s to 1/100,000 s
- Slow ShutterYes
- P/NP/N
- Wide Dynamic Range140 dB
- Day & NightIR cut filter
- Lens
- Lens Type & FOV3.8 to 16 mm, horizontal FOV: 109.1° to 29.6°, vertical FOV: 61.3° to 16.8°, diagonal FOV: 125.1° to 33.9°11 to 40 mm, horizontal FOV: 39.1° to 12.1°, vertical FOV: 21.4° to 6.8°, diagonal FOV: 45.8° to 13.9°
- Aperture3.8 to 16 mm: F1.411 to 40 mm: constant F1.4 throughout the zoom range
- Lens MountCS mount
- Blue Glass ModuleBlue glass module to reduce ghost phenomenon.
- ABFYes
- P-IrisYes
- Illuminator
- IR Range3.8 to 16 mm: 80 m11 to 40 mm: 120 m
- Wavelength850 nm
- Smart Supplement LightYes
- Video
- Max. Resolution2680 × 1520
- Main Stream50 Hz: 25 fps (2680 × 1520, 2560 × 1440, 1920 × 1080, 1280 × 720)60 Hz: 30 fps (2680 × 1520, 2560 × 1440, 1920 × 1080, 1280 × 720)
- Sub Stream50 Hz: 25 fps (704 × 576, 640 × 480)60 Hz: 30 fps (704 × 480, 640 × 480)
- Third Stream50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480)60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)
- Fourth Stream50Hz: 25fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480)60Hz: 30fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)
- Fifth Stream50 Hz: 25 fps (704 × 576, 640 × 480)60 Hz: 30 fps (704 × 480, 640 × 480)
- Custom Stream50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480)60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)
- Video Compression Main stream: H.265+/H.265/H.264+/H.264Sub-stream/third stream/fourth stream/fifth stream/custom stream: H.265/H.264/MJPEG
- Video Bit Rate32 Kbps to 16 Mbps
- H.264 TypeBaseline Profile/Main Profile/High Profile
- H.265 TypeMain Profile
- H.264+Main Stream supports
- H.265+Main Stream supports
- Bit Rate ControlCBR/VBR
- Stream TypeMain stream/sub-stream/third stream/fourth stream/fifth stream/custom stream
- Scalable Video Coding (SVC)H.265 and H.264 support
- Region of Interest (ROI)4 fixed regions for each stream
- Audio
- Environment Noise FilteringYes
- Audio Sampling Rate8 kHz/16 kHz/32 kHz/44.1 kHz/48 kHz
- Audio Compression G.711/G.722.1/G.726/MP2L2/PCM/MP3
- Audio Bit Rate64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/32Kbps(PCM)/8-320Kbps(MP3)
- Audio TypeMono sound
- Network
- Simultaneous Live ViewUp to 20 channels
- APIONVIF (PROFILE S, PROFILE G, PROFILE T), ISAPI, SDK, ISUP
- ProtocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, SFTP, SRTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP,UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS
- Smooth StreamingYes
- User/HostUp to 32 users. 3 user levels: administrator, operator and user
- SecurityPassword protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for ONVIF, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log, TLS 1.2
- Network StoragemicroSD/SDHC/SDXC card (256 GB) local storage, and NAS (NFS, SMB/CIFS), auto network replenishment (ANR)Together with high-end Hikvision memory card, memory card encryption and health detection are supported.
- ClientiVMS-4200, Hik-Connect, Hik-Central
- Web BrowserPlug-in required live view: IE8+Plug-in free live view: Chrome 57.0+, Firefox 52.0+, Safari 11+Local service: Chrome 41.0+, Firefox 30.0+
- Image
- Smart IRThe IR LEDs on camera should support Smart IR function to automatically adjust power to avoid image overexposure.
- Day/Night SwitchDay, Night, Auto, Schedule, Triggered by Alarm In
- Target CroppingYes
- Picture OverlayLOGO picture can be overlaid on video with 128 × 128 24 bit bmp format
- Image EnhancementBLC, HLC, 3D DNR, Defog, EIS, Distortion Correction
- Image Parameters SwitchYes
- Image SettingsRotate mode, saturation, brightness, contrast, sharpness, gain, white balance adjustable by client software or web browser
- SNR≥52 dB
- Interface
- Alarm 2 inputs, 2 outputs (max. 24 VDC, 1 A)
- Audio-IHSY: 1 input (line in), 1 output (line out), 3.5 mm connector, 2 channels
- RS-4851 RS-485 (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)
- Video Output1 Vp-p Composite Output(75 Ω/CVBS) (For debugging only)
- On-board StorageBuilt-in micro SD/SDHC/SDXC slot, up to 256 GB
- Hardware ResetYes
- Communication Interface1 RJ45 100M/1000M self-adaptive Ethernet port
- Power Output12 VDC, max. 200 mA (supported by all power supply types)
- Fiber OpticalWith F11: YesWithout /F11: No
- HeaterYes
- Smart Feature-Set
- Basic Event Motion detection, video tampering alarm, vibration detection, exception (network disconnected, IP address conflict, illegal login, HDD full, HDD error)
- Smart EventLine crossing detection, up to 4 lines configurableIntrusion detection, up to 4 regions configurableRegion entrance detection, up to 4 regions configurableRegion exiting detection, up to 4 regions configurableUnattended baggage detection, up to 4 regions configurableObject removal detection, up to 4 regions configurableScene change detection, audio exception detection, defocus detection
- CountingYes
- Intelligent (Deep Learning Algorithm)
- Face RecognitionDetects up to 30 faces simultaneously;Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30°;Up to 3 face libraries with up to 30000 faces each are configurable;Recognizes face identity via face modeling, grading and comparing to those in face library; Supports face library encryption.
- Multi-target-type DetectionSupports simultaneous detection of human body and faceGets 8 face features and 13 human body features
- Face CountingSupports entering/exiting counting (track 30 targets simultaneously);Supports facial recognition;Supports 24-hour dynamic deduplication and face library deduplication (up to 3 face libraries with up to 30000 faces);Supports reporting alarms when detecting the face is the same as that in the face library.
- Hard Hat Detection Detects up to 30 human targets simultaneouslySupports up to 4 shield regions
- Queue ManagementDetects queuing-up people number, and waiting time of each personGenerates reports to compare the efficiency of different queuing-ups and display the changing status of one queueSupports raw data export for further analysis
- Premier ProtectionLine crossing, intrusion, region entrance, region exitingSupport alarm triggering by specified target types (human and vehicle)Filtering out mistaken alarm caused by target types such as leaf, light, animal, and flag, etc.
- General
- Linkage MethodUpload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger captureTrigger recording: memory card, network storage, pre-record and post-recordTrigger captured pictures uploading: FTP, SFTP, HTTP, NAS, EmailTrigger notification: HTTP, ISAPI, alarm output, Email
- Online UpgradeYes
- Dual BackupYes
- Firmware VersionV5.5.121
- Web Client Language33 languagesEnglish, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese, Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil),Ukrainian
- General FunctionAnti- flicker, 5 streams and up to 5 custom streams, EPTZ, heartbeat, mirror, privacy masks, flash log, password reset via e-mail, pixel counter
- Software ResetYes
- Storage Conditions-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing)
- Startup and Operating Conditions-40 °C to 65 °C (-40 °F to 149 °F). Humidity 95% or less (non-condensing)
- Power Supply24 VDC ± 20%, three-core terminal block, reverse polarity protection; 24 VAC ± 20%, three-core terminal block, reverse polarity protection;PoE: 802.3bt, Type3, Class 5
- Power Consumption and CurrentWith F11: With extra load: 24 VDC, 1.07 A, 25.4 W; 24 VAC, 1.66 A, 50/60 Hz, 26.7 W; PoE(802.3bt, 42.5 VDC to 57 VDC), 0.7 A to 0.6 A, 29.1 WWithout /F11: With extra load: 24 VDC, 1.07 A, 25.4 W; 24 VAC, 1.64 A, 50/60 Hz, 26.8 W; PoE(802.3bt, 42.5 VDC to 57 VDC), 0.7 A to 0.5 A, 28 W"With extra load" means that an extra device is connected to and powered by the camera.
- Power InterfaceThree-core terminal block
- Screw MaterialSUS316L
- Camera Dimension465.3 × 169.2 ×164.7 mm (18.3″ × 6.7 × 6.5″)
- Package Dimension615 × 360 × 225 mm (24.2″ × 14.2" × 8.9″)