Overview Of TNNS00SWUP01
No Data FoundSpecification Of TNNS00SWUP01
TNNS00SWUP01 Datasheet
TNNS00SWUP01 Specification
TNNS00SWUP01Â Specification |
||||
Part Number |
88030QHS |
|||
Model |
TNNS00SWUP01 |
|||
Description |
OptiX OSN 7500 II-Software Release Entitlement(Per Subrack,R(N)->R(N+1)) |
|||
Discount Category |
Software Upgrade |
|||
Product Line |
Networking |
|||
Sub Product Family |
MSTP |
|||
Product Series |
OSN 7500 II |
|||
UOM |
RMB |
|||
Huawei OSN 7500 IIÂ Specification |
||||
Dimensions |
800mm (H) x 496mm (W) x 295mm (D) |
|||
Switch Capacity |
Packet: 320 Gbit/s and TDM: 360 Gbit/s (higher order), 40 Gbit/s (lower order), OTN: 560Gbit/s |
|||
Service Slots |
32 slots, 16 slots for interface boards and 16 slots for processing boards with same bandwidth per slot |
|||
Supported Interface |
OTN interface |
OTU-1, OTU-2/2e, OTU-3(40G, compliant with OTL3.4 standard) |
||
Ethernet interface |
FE/GE/10GE/40GE |
|||
SDH interface |
STM-1/4/16/64 |
|||
PDH interface |
E1/T1, E3/T3, E4 |
|||
ATM interface |
E1, STM-1 |
|||
WDM interface |
40 DWDM wavelengths, compliant with ITU-T G.694.1 8 CWDM wavelengths, compliant with ITU-T G.694.2 |
|||
SAN interface |
FDDI, ESCON, FICON/FICON Express, FC100/200/400/800/1200 |
|||
PCM interface |
FXS/FXO, 2/4W VF & E&M X.21/V.35/V.11/V.24/V.28, RS232/RS422, RS449/RS423A/RS422A, RS530/RS530A,RS485, G.703 64 kbit/s codirectional |
|||
Other interface |
DDN, Video |
|||
Networking Mode |
Supports packet, hybrid (packet + SDH or OTN + SDH) or SDH networking Supporting WDM networking Supporting single-fiber bidirectional transmission |
|||
Power Supply |
-48V DC/-60V DC |
|||
Operation Environment |
 |
Temperature |
Relative Humidity |
|
Long term |
0ºC ~ 45ºC |
5% ~ 85% |
||
Short term |
-5ºC ~ 55ºC |
5% ~ 95% |
||
Ethernet Feature |
E-Line and E-LAN, QinQ MPLS-TP based VPWS and VPLS Multi-section pseudo-wire (MS-PW) ETH PWE3, TDM PWE3, A TM/IMA PWE3 IGMP Snooping V2 Blacklist, Broadcast packet suppression, ACL VLAN SWAP |
|||
PCM Feature |
Voice or data Conference/Meeting,P2MP,MP2MP FXO/FXS mode can be set by software E&M Interface voltage can be set by software (-48V/-12V) E&M signaling can be set by software (Bell types I, II, III, IV, V and British Telecom SSDC5) |
|||
QoS |
Hierarchical QoS scheduling and traffic shaping DiffServ mode based on traffic classification, eight priority queues Simple traffic classification, complex traffic classification, per hop behavior (PHB),and A CL Committed access rate (CAR), shaping based on port scheduling priority PQ scheduling priority, weighted fair queuing (WFQ) and PQ+WFQ queuing Tail drop and weighted random early detection (WRED) |
|||
OAM |
MPLS-TP OAM |
LSP/PW OAM: CC, LB, LT AIS, RDI LM, DM LCK, TST CSF |
||
MPLS OAM |
LSP/PW OAM: FDI, BDI,CV, FFD, TraceRoute, Ping, LM, DM PW OAM: CES PW VCCV |
|||
Ethernet OAM |
ETH-CC, ETH-Loopback, ETH-Link Trace, Remote Loopback, Remote Fault Detection, RMON(RFC 2819) |
|||
Protection |
Equipment-level Protection |
Universal Cross-Connect, System Control and Clock Processing Board 1+1 backup and power 1+1 backup |
||
MPLS-TP based Service Protection |
LSP/PW Linear protection, Ring protection Anti multifailure protection based on MS-PW LAG, MC-LAG, Dual-homing protection, LPT |
|||
SDH based Service Protection |
2/4 fiber MS-SP Ring; 1+1/1:n (n<=14) Linear MSP SNCP/SNCTP Tributary protection for E1/T1, E3/T3, E4, STM-1(e) and FE |
|||
ASON |
Distributed restorable rerouting protection 5-level service dedicated protection scheme based on different SLA: Diamond, Gold, Silver, Copper and Iron services Based on VC-4 and VC-12 granularity |
|||
Synchronization |
Both Ethernet and SDH networks supporting clock synchronization Supporting G.813, Synchronous Ethernet and IEEE 1588v2 synchronization Adaptive clock recovery (ACR) Two external clock inputs/outputs (2 MHz or 2 Mbit/s) Two external time signals (1pps+TOD) |