Overview
The Cisco 7600-SIP-200 is a high-performance switch module designed to enhance the capabilities of the Cisco 6500 series switches. With its advanced features and strong design, this module provides organizations with the scalability and reliability needed to support demanding networking environments. The Cisco 7600-SIP-200 delivers industry-leading performance, capable of handling high volumes of data traffic without compromising speed or reliability. Its advanced architecture ensures smooth operation even under heavy workloads. With support for multiple interface types and extensive port density, it offers flexibility to accommodate evolving network requirements. Whether used in data centers, campus networks, or service provider environments, the 7600-SIP-200 delivers consistent performance and reliability. Built-in redundancy features, such as hot-swappable components and hardware redundancy, ensure maximum uptime and reliability. In the event of a component failure, the switch module seamlessly switches over to backup resources without disrupting network operations. With integrated security features such as access control lists (ACLs), VLAN segmentation, and advanced threat detection capabilities, the 7600-SIP-200 helps organizations safeguard their network infrastructure against cyber threats and unauthorized access.
Specification
Specifications | |
---|---|
Compatibility | Cisco 7600 Series SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, and RSP720-3CXL-10G systems |
Minimum Software Compatibility | Cisco IOS® Software Release 12.2(18)SXE, or later |
Protocols | TCP
User Datagram Protocol (UDP) IPv4 Unicast and Multicast IPv6 Unicast and Multicast MPLS |
Encapsulation | Frame Relay
Multilink Frame Relay – FRF.16 PPP MLPPP Bridge Control Protocol (BCP) High-Level Data Link Control (HDLC) ATM permanent virtual circuit (PVC)-constant bit rate (CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR) ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, and UBR+ POS |
Cards, Ports, and Slots | Four SPA bays per Cisco 7600 SIP-200. The SIP-200 supports oversubscription |
QoS, Access Control Lists (ACLs), and Low-Speed Aggregation Features | |
QoS | Modular QoS CLI (MQC)
Classification ◦ ACLs ◦ IP Precedence ◦ IPv4 and IPv6 Differentiated services code point (DSCP) MPLS experimental values (MPLS EXP) Frame Relay Discard Eligibility ATM cell loss priority (CLP) QoS mappings – CLP, DE to IP type of service (ToS), MPLS EXP; and conversely Hierarchical QoS |
Queuing | Per-virtual circuit queuing
Low-latency queuing (LLQ) Weighted Fair Queuing (WFQ) Class-Based Weighted Fair Queuing (CBWFQ) |
Congestion Avoidance | Weighted Random Early Detection (WRED) |
Traffic Marking, Shaping, and Bandwidth Policing | Marking – IP Precedence, DSCP, MPLS EXP, ATM CLP, and FR DE
Policing Distributed traffic shaping (DTS) Hierarchical traffic shaping Distributed network-based application recognition (NBAR) |
Fragmentation | Distributed link fragmentation and interleaving (dLFI)
Frame Relay Forum FRF.12 |
ACLs and Security | Standard, extended, dynamic, reflexive, and time-based ACLs
Classification based on packet length |
Bandwidth Efficiency | cRTP
ATM permanent-virtual-circuit (PVC) bundles Frame Relay virtual circuit bundles |
Layer 2 Bridging and Interworking | RFCs 1483 and RFC 2684 ATM Virtual Circuits – Routed and Bridged
RFC 1490 Frame Relay Virtual Circiuts – Routed and Bridged Multipoint Bridging for RFC 1483 virtual circuits Multipoint Bridging for RFC 1490 virtual circuits Bridge Control Protocol Bridging of routed encapsulation Routed bridged encapsulation |
Layer 2 and Layer 3 VPNs | RFC 2547 MPLS VPNs
Ethernet over MPLS (EoMPLS) ATM over MPLS (ATMoMPLS) ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single-cell relay virtual circuit mode Frame Relay over MPLS (FRoMPLS) PPP over MPLS (PPPoMPLS) HDLC over MPLS (HDLCoMPLS) Virtual circuit-to-virtual circuit local switching – Frame Relay, ATM – AAL0, AAL5 |
High Availability | Nonstop forwarding (NSF)
Stateful switchover (SSO) Automatic Protection Switching (APS) with ATM, POS SPAs OIR |
Memory | 512-MB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM)
Optionally upgradable to 1-GB DDR SDRAM memory |
Supported SPAs | ATM
Cisco 2-Port OC-3c/STM-1c ATM Shared Port Adapter Cisco 4-Port OC-3c/STM-1c ATM Shared Port Adapter POS/Channelized Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter Cisco 1-Port Channelized OC-3c/STM-1c POS Shared Port Adapter Copper/Channelized Cisco 8-Port Channelized T1/E1 Shared Port Adapter Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter Cisco 4-Port Clear Channel T3/E3 Shared Port Adapter Cisco 2-Port Channelized T3 (DS0) Shared Port Adapter Cisco 4-Port Channelized T3 (DS0) Shared Port Adapter Cisco 4-Port Serial Shared Port Adapter Fast Ethernet Cisco 4-Port Fast Ethernet Shared Port Adapter Cisco 8-Port Fast Ethernet Shared Port Adapter |
Environmental Conditions | Operating temperature: 32 to 104°F (0 to 40°C)
Storage temperature: –40 to 167°F (–20 to 70°C) Relative humidity: 10 to 90%, noncondensing Operating altitude: –60 to 2000m |
MIBs | Cisco Entity MIB (CISCO-ENTITY-MIB)
Cisco Entity Asset MIB CISCO-ENTITY-VENDOR-OIDTYPE-MIB OID Cisco Entity Field-Replaceable Unit (FRU) Control MIB CISCO-ENHANCED-MEMPOOL-MIB CISCO-PROCESS-MIB CISCO-ENVMON-MIB Cisco Entity Alarm MIB Simple Network Management Protocol (SNMP) MIB II (RFC 1213) Remote Monitoring (RMON) MIB (RFC 1757) |
Network Management | Supported with CiscoWorks CiscoView
CiscoWorks Resource Manager Essentials (RME) Cisco IP Solution Center (ISC) |
Physical Specifications | Occupies one slot in a Cisco 7600 Series Router
Supports up to 12 Cisco 7600 SIP-200s in a 13-slot chassis Requires Supervisor Engine SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, or RSP720-3CXL-10G Dimensions (H x W x D): 1.74 x 15.3 x 17 in. Weight: 8.5 lb |
Power | 160W power consumption per Cisco 7600 SIP-200
240W maximum power consumption with Cisco 7600 SIP-200 and 4 SPAs |
Indicators | Cisco 7600 SIP-200 status:
green (operational) orange (faulty) |
Regulatory Compliance | CE marking |
Safety | UL 60950
CSA C22.2 No. 60950 EN60950 TS001 IEC 60950 AS/NZS3260 |
EMC | FCC Part 15 Class A
ICES-003 Class A VCCI Class A EN55022 Class A EN55024 EN50082-1 CISPR22 Class A ETS-300 386 |
Telecommunications Standards | ITU-T G.610
ITU-T G.703 ITU-T G.707 ITU-T G.783 Sections 9-10 ITU-T G.784 ITU-T G.803 ITU-T G.813 ITU-T G.825 ITU-T G.826 ITU-T G.841 ITU-T G.957 Table 3 ITU-T G.958 ITU-T I.361 ITU-T I.363 ITU I.432 ITU-T Q.2110 ITU-T Q.2130 ITU-T Q.2140 ITU-T O.151 ITU-T O.171 ETSI ETS 300 417-1-1 ACA TS 026 (1997) BABT/TC/139 (Draft 1e) |