+1 (281)
747-5957
Specification
| Specifications | |
|---|---|
| Type | HPE 870 Unified Wired-WLAN Appliance |
| I/O ports and slots | 12 RJ-45 autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 100BASE-TX: half or full; 1000BASE-T: full only
12 SFP 100/1000 Mb/s ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX) 4 SFP+ 10GbE ports (IEEE 802.3ae Type 10GBASE-ER, IEEE 802.3ae Type 10GBASE-LR, IEEE 802.3ae Type 10GBASE-SR, IEEE 802.3aq Type 10GBASE-LRM) |
| Additional ports and slots | 1 RJ-45 serial console port
1 RJ-45 out-of-band management port |
| Power supplies | 2 power supply slots 1 minimum power supply required includes: 1 x JG527A (HPE X351 300W 100-240VAC to 12VDC Power Supply) |
| Memory and processor (Processor) | Broadcom XLP432 Eight core @ 1.4 GHz, 4 GB flash, 8 GB DDR3 SDRAM |
| Mounting and enclosure | EIA-standard 19-inch Telco rack or equipment cabinet (hardware included) |
| Features | Default supported APs: 256
Maximum supported APs: 1536 (via the optional purchase of the 32 or 128 access point E-LTU) Maximum supported clients and centralized throughput: 30,000 clients • 40G centralized throughput Maximum supported users via local portal authentication: 6000 Maximum supported users via local authentication (AAA): 3,000 Maximum supported configured SSIDs: 512 Maximum supported ACLs: 32,000 Supported MSM APs are automatically discovered, Comware firmware is loaded, and the APs can be fully managed. AP upgrades license rules for redundant HPE 870 Unified Wired-WLAN Appliance deployments. The primary HPE 870 Unified Wired-WLAN Appliance’s AP count must be increased using the optional HPE Unified Wired-WLAN 128 AP E-LTU (JG649AAE) or the HPE Unified Wired-WLAN 32 AP E-LTU (JG774AAE). The secondary HPE 870 Unified Wired-WLAN Appliance’s AP count can be increased as needed using the reduced-cost HPE Unified Wired-WLAN 128 AP Redundant E-LTU. Power supplies are hot-swappable. When two power supplies are used, they must be the same type. An AC and a DC power supply must not be used together in the same appliance. |
| Dimensions (W x D x H) | 17.32(w) x 18.9(d) x 3.47(h) in. (44 x 48 x 8.81 cm) (2U height) |
| Weight | 29.32 lb (14.5 kg) |
| Maximum heat dissipation | 887 BTU/hr (935.79 kJ/hr) |
| AC voltage | 100 - 240 V ac |
| DC voltage | -48 to -60 V dc |
| Maximum power rating | 260 W |
| Frequency | 50/60 Hz |
| Operating temperature | 0° to 45°C (32° to 113°F) |
| Operating relative humidity | 5% to 95%, noncondensing |
| Nonoperating/storage temperature | -40°F to 158°F (-40°C to 70°C) |
| Nonoperating/storage relative humidity | 5% to 95%, noncondensing |
| Altitude | up to 16,404 ft (5 km) |
| Safety | UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1; FDA 21 CFR Subchapter J |
| Emissions | EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR 47) CLASS A |
| Immunity EN | EN 55024, CISPR 24 & ETSI EN 300 386 |
| Management | IMC—Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP; IEEE 802.3 Ethernet MIB; Ethernet Interface MIB |
