8 Slot Advanced Layer 3 Modular Switch - Unmanaged - Full duplex

Switch type

Unmanaged

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity

Power over Ethernet (PoE)

Data transmission

Switching capacity

640 Gbit/s

Maximum data transfer rate

80 Gbit/s

MAC address table

16000 entries

Design

Form factor

3 U

Safety

UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950

Electromagnetic compatibility

EN55022 class A, FCC class A,VCCI class A

Certification

UL, cUL,TUV, RoHS

Power

Power consumption (typical)

510 W

Other features

Dimensions (WxDxH)

440 x 456 x 132 mm

Power requirements

100-240V@47-63Hz; 36-72V

Power supply type

AC/DC

Electromagnetic immunity

EN55024, EN61000-3-lev. 2

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-30 - 70 °C

Operating relative humidity (H-H)

5 - 80 %

Storage relative humidity (H-H)

5 - 95 %

Operating altitude

0 - 3050 m

Weight & dimensions

Weight

14.3 kg

Performance

Memory type

DDR-SDRAM

Internal memory

512 MB

Flash memory

64 MB

Noise level

39.7 dB

Mean time between failures (MTBF)

150000 h

Network

Full duplex

Overview Of AT-SBX908-00

The Allied Telesis SwitchBlade® x908 industry leading modular switch incorporates eight highspeed 60Gbps expansion bays, delivering a new generation of high performance. The SwitchBlade x908 provides scalable and versatile switching solutions for today’s Enterprise networks. The highly configurable SwitchBlade x908 3RU modular switch combines an advanced IPv4 L3 feature set and comprehensive IPv6 routing features, with wire-speed IPv6 hardware capability, future proofing the network. Featuring dual hot-swap PSUs, an advanced QoS feature set,multicasting support, and LAN resiliency support, the SwitchBlade x908 also provides Service Provider capabilities such as a large L3 route table, and EPSR support. Stacking between two units is supported via fixed stacking connectors on the rear of the chassis, providing 160Gbps of stacking bandwidth. Stacking of more than two units is via expansion modules (XEMs) on the front panel. The SwitchBlade x908 incorporates the AlliedWare Plus™ Operating System, using an industry standard Command Line Interface (CLI), facilitating effortless manageability.

Specification Of AT-SBX908-00

AT-SBX908-00 Datasheet

Management features
Switch type	Unmanaged
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	64
Power over Ethernet (PoE)
Power over Ethernet (PoE)	N
Data transmission
Switching capacity	640 Gbit/s
Maximum data transfer rate	80 Gbit/s
MAC address table	16000 entries
Design
Form factor	3 U
Safety	UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950
Electromagnetic compatibility	EN55022 class A, FCC class A,VCCI class A
Certification	UL, cUL,TUV, RoHS
Power
Power consumption (typical)	510 W
Other features
Dimensions (WxDxH)	440 x 456 x 132 mm
Power requirements	100-240V@47-63Hz; 36-72V
Power supply type	AC/DC
Electromagnetic immunity	EN55024, EN61000-3-lev. 2
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-30 - 70 °C
Operating relative humidity (H-H)	5 - 80 %
Storage relative humidity (H-H)	5 - 95 %
Operating altitude	0 - 3050 m
Weight & dimensions
Weight	14.3 kg
Performance
Memory type	DDR-SDRAM
Internal memory	512 MB
Flash memory	64 MB
Noise level	39.7 dB
Mean time between failures (MTBF)	150000 h
Network
Full duplex	Y