huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • AT-DMC100/SC-50

    AT-DMC100/SC-50 - 100 Mbit/s - 100Base-TX - 100Base-FX - 100 Mbit/s - 1488000 pps - 148800 pps
  • Condition:

    New Factory Sealed
  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • Internal N
    Network
    Maximum data transfer rate 100 Mbit/s
    Converter input interface 100Base-TX
    Converter output interface 100Base-FX
    Ethernet LAN data rates 100 Mbit/s
    Cable types supported Fiber
    Duplex system Full,Half
    Rate limiting Y
    Auto MDI/MDI-X Y
    Packet forwarding rate (10 Mbps) 1488000 pps
    Packet forwarding rate (100 Mbps) 148800 pps
    Packet forwarding rate (1 Gbps) 14880 pps
    Performance
    Maximum transfer distance 2000 m
    Wavelength 1310 nm
    Fiber mode structure Multi-mode
    Ports & interfaces
    Fiber optic connector SC
    DC-in jack Y
    Weight & dimensions
    Width 31.8 mm
    Depth 91.4 mm
    Height 21.6 mm
    Weight 113.4 g
    Operational conditions
    Operating temperature (T-T) 0 - 40 °C
    Storage temperature (T-T) -15 - 65 °C
    Operating relative humidity (H-H) 5 - 95 %
    Storage relative humidity (H-H) 5 - 95 %
    Operating altitude 0 - 3048 m
    Packaging content
    AC adapter included Y
  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
AT-DMC100/SC-50

AT-DMC100/SC-50 - 100 Mbit/s - 100Base-TX ...

Overview Specification Support Warranty

Overview Of AT-DMC100/SC-50

DMC Series Gigabit Desktop USB-Powered Media Converters The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today. Overview At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact—with a small carbon footprint—the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements. Fiber Connections The Allied Telesis range of Gigabit media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber. VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Simple Installation All Allied Telesis media converters feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of the fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber-optic test equipment. Smart Link Restoration Smart Link Restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The DMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.5W of power usage, DMC Series media converters are some of the most efficient in the market today. these packets, enabling them to be used in modern networks.

Specification Of AT-DMC100/SC-50

AT-DMC100/SC-50 Datasheet

Design
Internal N
Network
Maximum data transfer rate 100 Mbit/s
Converter input interface 100Base-TX
Converter output interface 100Base-FX
Ethernet LAN data rates 100 Mbit/s
Cable types supported Fiber
Duplex system Full,Half
Rate limiting Y
Auto MDI/MDI-X Y
Packet forwarding rate (10 Mbps) 1488000 pps
Packet forwarding rate (100 Mbps) 148800 pps
Packet forwarding rate (1 Gbps) 14880 pps
Performance
Maximum transfer distance 2000 m
Wavelength 1310 nm
Fiber mode structure Multi-mode
Ports & interfaces
Fiber optic connector SC
DC-in jack Y
Weight & dimensions
Width 31.8 mm
Depth 91.4 mm
Height 21.6 mm
Weight 113.4 g
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -15 - 65 °C
Operating relative humidity (H-H) 5 - 95 %
Storage relative humidity (H-H) 5 - 95 %
Operating altitude 0 - 3048 m
Packaging content
AC adapter included Y
Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
why orm system image
why orm system image
Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

Standard Services
Standard Services image
Standard Services image
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
×
ORM Registered Companies