Overview Of C9300-48UB-E=
Cisco Catalyst Switch C9300-48UB-E= is the most stackable switch for security, IoT, mobility, and cloud and serves as the building block for Cisco's premier corporate architecture, Software-Defined Access. Cisco Catalyst Switch C9300-48UB-E= provides 48 x 10/100/1000 (UPOE) multi-gigabit copper or SFP fiber ports with a default 1100W AC power supply and a 722W PoE budget. The Cisco Switch C9300-48UB-E= consists of 256 Gbps switching capability and 736 stacking along with 190.48 Mpps forward rate and 547.62 Mpps with stacking and it is built with advanced networking features.
Specification Of C9300-48UB-E=
C9300-48UB-E= Datasheet
Product Description | Catalyst 9300 48-port modular uplinks 5G UPoE,Network Advantage |
FRU Power Supply | Yes |
FRU Fans | Yes |
Modular Uplinks | Yes |
Stacking Bandwidth Support | 480 Gbps |
Cisco StackPower | Yes |
Catalyst 9800 Embedded WLC | Yes (200 APs) |
SD-Access Support | Yes (256 Virtual Networks) |
Total 10/100/1000,Multigigabit copper or SFP Fiber | 48 Cisco UPoE |
Uplink Configuration | Modular Uplinks |
Default AC power supply | 1100W AC |
Available PoE power | 822W |
Total number of MAC addresses | 32,000 |
Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
IPv6 routing entries | 16,000 |
Multicast routing scale | 8,000 |
QoS scale entries | 5,120 |
ACL scale entries | 5,120 |
Packet buffer per SKU | 16 MB buffer for 24- or 48-port Gigabit Ethernet models 32 MB buffer for 24 and 48-port Multigigabit |
FNF entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models 128,000 flows on 24-port Multigigabit |
DRAM | 8 GB |
Flash | 16 GB |
VLAN IDs | 4094 |
Total Switched Virtual Interfaces (SVIs) | 1000 |
Jumbo frames | 9198 bytes |
Total routed ports per Catalyst 9300 Series stack | 448 |
Switching capacity | 256 Gbps |
Switching capacity with stacking | 736 Gbps |
Forwarding rate | 190.48 Mpps |
Forwarding rate with stacking | 547.62 Mpps |
Power connectors | •Customers can provide power to a switch by using the internal power at the back of the switch
•Internal power supply connector The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet |