+1 (281) 747-5957
Overview Of C9300L-24UXG-4X-A
Cisco Catalyst Switch C9300L-24UXG-4X-A is the most stackable switch for security, IoT, mobility, and cloud. Cisco Catalyst Switch C9300L-24UXG-4X-A provides 24 x 10/100/1000 UPoE 8xmGig Multi Gigabit copper or SFP Fiber ports with 4x 10G fixed uplink configuration and a default 1100W AC power supply. The Cisco Switch C9300L-24UXG-4X-A consists of 272 Gbps of switching capability and 592 stacking along with a 202.38 Mpps forward rate and 440.47 Mpps with stacking and it is built with advanced networking features.
Specification Of C9300L-24UXG-4X-A
C9300L-24UXG-4X-A Datasheet
| Product Description | Catalyst 9300 24-port fixed uplinks UPoE,8xmGig,4X10G uplinks,Network Advantage |
| FRU Power Supply | Yes |
| FRU Fans | Yes |
| Modular Uplinks | No |
| Stacking Bandwidth Support | 320 Gbps |
| Cisco StackPower | No |
| Catalyst 9800 Embedded WLC | Yes (50 APs) |
| SD-Access Support | Yes (256 Virtual Networks) |
| Total 10/100/1000,Multigigabit copper or SFP Fiber | 24 UPoE 8xmGig |
| Uplink Configuration | 4x 10G fixed uplinks |
| Default AC power supply | 1100W AC |
| Available PoE power | 880W |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
| IPv6 routing entries | 16,000 |
| Multicast routing scale | 8,000 |
| QoS scale entries | 5,120 |
| ACL scale entries | 5,120 |
| Packet buffer per SKU | 16 MB buffer for 24 and 48 port Gigabit Ethernet models |
| FNF entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models |
| DRAM | 8 GB |
| Flash | 16 GB |
| VLAN IDs | 4094 |
| Total Switched Virtual Interfaces (SVIs) | 1000 |
| Jumbo frames | 9198 bytes |
| Total routed ports per Catalyst 9300 Series stack | 416 |
| Switching capacity | 272 Gbps |
| Switching capacity with stacking | 592 Gbps |
| Forwarding rate | 202.38 Mpps |
| Forwarding rate with stacking | 440.47 Mpps |
| Mean Time Between Failures–MTBF (hours) | 332,640 |
| Power connectors | •Customers can provide power to a switch by using the internal power at the back of the switch
•Internal power supply connector The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet |
