+1 (281) 747-5957
Overview Of C9300L-48UXG2Q-10A
Cisco Catalyst Switch C9300L-48UXG2Q-10A is the most sophisticated stackable corporate switching platform for security, IoT, mobility, and cloud. Cisco Catalyst Switch C9300L-48UXG2Q-10A provides 48 x 10/100/1000 multi-gigabit copper or SFP fiber ports with a 351.19 Mpps forwarding rate. The Catalyst Switch C9300L-48UXG2Q-10A is the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture, capable of up to 480 Gbps, and the first optimised platform for high-density Wi-Fi 6 and 802.11ac Wave2.
Specification Of C9300L-48UXG2Q-10A
C9300L-48UXG2Q-10A Datasheet
| Product Description | C9300L 48p PoE+ 12xmGig,2x40G Uplink,Network Advantage |
| FRU Power Supply | Yes |
| FRU Fans | Yes |
| Modular Uplinks | No |
| Stacking Bandwidth Support | 320 Gbps |
| Cisco StackPower | No |
| Catalyst 9800 Embedded WLC | Yes (50 APs) |
| SD-Access Support | Yes (256 Virtual Networks) |
| Total 10/100/1000,Multigigabit copper or SFP Fiber | 48 UPoE 12xmGig |
| Uplink Configuration | 2x 40G fixed uplinks |
| Default AC power supply | 1100W AC |
| Available PoE power | 675W |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
| IPv6 routing entries | 16,000 |
| Multicast routing scale | 8,000 |
| QoS scale entries | 5,120 |
| ACL scale entries | 5,120 |
| Packet buffer per SKU | 16 MB buffer for 24 and 48 port Gigabit Ethernet models |
| FNF entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models |
| DRAM | 8 GB |
| Flash Memory | 16 GB |
| VLAN IDs | 4094 |
| Total Switched Virtual Interfaces (SVIs) | 1000 |
| Jumbo frames | 9198 bytes |
| Total routed ports per Catalyst 9300 Series stack | 416 |
| Switching capacity | 472 Gbps |
| Switching capacity with stacking | 792 Gbps |
| Forwarding rate | 351.19 Mpps |
| Forwarding rate with stacking | 589.28 Mpps |
| Mean Time Between Failures–MTBF (hours) | 275,010 |
| Power connectors | • Customers can provide power to a switch by using the internal power at the back of the switch
• Internal power supply connector The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet |
