Overview Of CE12804SA-B2
No Data FoundSpecification Of CE12804SA-B2
CE12804SA-B2 Datasheet
CE12804SA-B2 Specification
CE12804SA-B2 Specifications |
|
Switching Capacity |
45/ |
Forwarding Rate |
17,280 |
Service Slots |
4 |
Switching Fabric |
2 |
Fabric Architecture |
Clos architecture, cell switching, VoQ, and distributed large buffer |
Airflow Design |
Strict front-to-back |
Device Virtualization |
Virtual System (VS) |
Cluster Switch System (CSS)2 |
|
Super Virtual Fabric (SVF)3 |
|
Network Virtualization |
M-LAG |
TRILL |
|
VxLAN routing and bridging |
|
EVPN |
|
QinQ in VXLAN |
|
VM Awareness |
Agile Controller |
Network Convergence |
FCoE |
DCBX, PFC, and ETS |
|
Data Center Interconnect |
BGP-EVPN |
Ethernet Virtual Network (EVN) for inter-DC Layer 2 network interconnections |
|
Programmability |
OpenFlow |
ENP programming |
|
OPS programming |
|
Puppet, Ansible, and OVSDB plug-ins released on open source websites |
|
Linux container for open source and customization programming |
|
Traffic Analysis |
NetStream |
Hardware-based sFlow |
|
VLAN |
Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN |
|
QinQ |
|
MUX VLAN |
|
GVRP |
|
MAC Address |
Dynamic learning and aging of MAC addresses |
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address limiting based on ports and VLANs |
|
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP |
IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+ |
|
IP packet fragmentation and reassembling |
|
IPv6 |
IPv6 over VXLAN |
IPv6 over IPv4 |
|
IPv6 Neighbor Discovery (ND) |
|
Path MTU Discovery (PMTU) |
|
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 |
|
Multicast |
IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping |
|
IGMP proxy |
|
Fast leave of multicast member interfaces |
|
Multicast traffic suppression |
|
Multicast VLAN |
|
MPLS |
Basic MPLS functions |
MPLS VPN/VPLS/VPLS over GRE |
|
Reliability |
Link Aggregation Control Protocol (LACP) |
STP, RSTP, VBST, and MSTP |
|
BPDU protection, root protection, and loop protection |
|
Smart Link and multi-instance |
|
Device Link Detection Protocol (DLDP) |
|
Ethernet Ring Protection Switching (ERPS, G.8032) |
|
Hardware-based Bi-directional Forwarding Detection (BFD) |
|
VRRP, VRRP load balancing, and BFD for VRRP |
|
BFD for BGP/IS-IS/OSPF/Static route |
|
In-Service Software Upgrade (ISSU) |
|
Segment Routing (SR) |
|
QoS |
Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information |
Actions include ACL, CAR, and re-marking |
|
Queue scheduling modes such as PQ, WFQ, and PQ + WRR |
|
Congestion avoidance mechanisms, including WRED and tail drop |
|
Traffic shaping |
|
O&M |
IEEE 1588v2 |
Packet Conservation Algorithm for Internet (iPCA) |
|
Dynamic Load Balancing (DLB) |
|
Dynamic Packet Prioritization (DPP) |
|
Network-wide path detection |
|
Microsecond-level buffer detection |
|
Configuration |
Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 |
|
File upload and download through FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
Hot patches |
|
User operation logs |
|
Zero-Touch Provisioning (ZTP) |
|
Security |
802.1x authentication |
RADIUS and HWTACACS authentication for login users |
|
Command line authority control based on user levels, preventing unauthorized users from using commands |
|
Defense against MAC address attacks, broadcast storms, and heavy-traffic attacks |
|
Ping and traceroute |
|
Remote Network Monitoring (RMON) |
|
Dimensions |
442 x |
Chassis Weight (empty) |
< 60 kg |
Operating Voltage |
AC: 90V to 290V |
Max. Power Supply |
6,000W |