Overview Of FAP-221E
No Data FoundSpecification Of FAP-221E
FAP-221E Datasheet
FAP-221E Specification
FAP-221E Specification |
|
Hardware |
|
Hardware Type |
Indoor AP |
Number of Radios |
2 + 1 BT/BLE |
Number of Antennas |
4 Internal + 1 Internal BT/BLE |
Antenna Type and Peak Gain |
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz)* |
2.400€“2.4835, 5.150€“5.250, 5.250€“5.350, 5.470€“5.725,5.725€“5.850 |
Radio 1 Capabilities |
2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (256 QAM) |
Radio 2 Capabilities |
5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz (256 QAM) |
Maximum Data Rate |
Radio 1: up to 400 Mbps Radio 2: up to 867 Mbps |
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Interfaces |
1x 10/100/1000 Base-T RJ45 |
Power over Ethernet (PoE) |
IEEE 802.3af |
Simultaneous SSIDs |
16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA„¢ and WPA2„¢ with 802.1x or Preshared key, WEP,Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
2.4 GHz: 23 dBm / 200 mW (2 chains combined)* 5 GHz: 24 dBm / 251 mW (2 chains combined)* |
Kensington Lock |
Yes |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X,802.3af, 802.3az |
SSID Types Supported |
Local-Bridge, Tunnel, Mesh |
Per Radio Client Capacity |
Up to 512 |
Cellular Co-existence |
Yes |
LED Off Mode |
Yes |
Advanced 802.11 Features |
|
802.11ac MU-MIMO Wave 2 |
Yes |
Transmit Beam Forming (TxBF) |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
A-MPDU and A-MSDU Packet Aggregation |
Yes |
MIMO Power Save |
Yes |
Short Guard Interval |
Yes |
Wireless Monitoring Capabilities |
|
Rogue Scan Radio Modes |
Background, Full-time |
WIPS / WIDS Radio Modes |
Background, Full-time |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Dimensions |
|
Length x Width x Height |
6.3 x 6.3 x 1.85 inches(160 x 160 x 47 mm) |
Mounting Options |
Ceiling, T-Rail, and Wall |
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
Environment |
|
Power Supply |
SP-FAP200-PA-XX, GPI-115,or GPI-130 |
Power Consumption (Max.) |
12.36 W |
Humidity |
5€“90% non-condensing |
Operating / Storage Temperature |
-4€“113°F (-20€“45°C) /-40€“158°F (-40€“70°C) |
Directives |
Low Voltage Directive €¢ RoHS |
UL2043 Plenum Material |
Yes |
Mean Time Between Failures |
>30 Years |
IP Rating |
\ |
Surge Protection Built In |
\ |
Hit-less PoE Failover |
No |
Certifications |
|
Wi-Fi Alliance Certified |
Yes |
DFS |
FCC, IC, CE, Japan, Taiwan |
Warranty |
|
Limited Lifetime Warranty |
Yes |
* Frequency selection and power may be restricted to abide by regional regulatory compliance laws. |