Overview Of Huawei OptiX RTN 510
No Data FoundSpecification Of Huawei OptiX RTN 510
Huawei OptiX RTN 510 Datasheet
Huawei OptiX RTN 510 Specification
Huawei OptiX RTN510 Specification |
||
Platforms |
AP |
RT II |
RF Performance |
||
Frequency range |
5 GHz: 4910 MHz to 5970 MHz |
5 GHz: 4910 MHz to 5970 MHz |
Channel spacing |
10 | 20 | 40 | 80 MHz |
10 | 20 | 40 | 80 MHz |
Modulation schemes |
MCS0 (BPSK) to MCS9 (256QAM) |
MCS0 (BPSK) to MCS9 (256QAM) |
RF functions |
GPS synchronization, dynamic frequency selection (DFS), AM |
GPS synchronization, dynamic frequency selection (DFS), AM |
Antenna gain |
Typical: 17 dBi (PtMP), 22 dBi (PTP) Max: 18 dBi (PtMP), 23 dBi (PTP) |
Typical: 16 dBi Max: 17 dBi |
Throughput |
Up to 750 Mbps |
Up to 250 Mbps |
System Performance |
||
Ports |
1 x GE (o), 1 x GE (e), 1 x GE (P&E) |
1 x GE (e), 1 x GE (P&E) |
Dimensions (H x W x D) |
204 mm x 204 mm x 65 mm |
240 mm x 213 mm x 61.5 mm |
Power consumption |
26 W (typical value) |
8 W (typical value) |
Power supply |
AC/DC/PoE++ |
AC/DC/PoE/PoE+ |
Lightning protection |
The device's built-in surge protection design complies with IEC/EN 61000-4-5 and provides the capability to withstand at most 10 kV surges. |
|
Dying gasp |
Supported |
|
Ethernet Performance |
||
Service type |
E-Line, E-LAN |
|
VLAN |
IEEE 802.1q, IEEE 802.1p |
|
QinQ |
Supported |
- |
QoS |
· Service classification by DSCP/CoS · SP, SP+WRR, WRR · Port shaping · 8-class QoS |
· Service classification by DSCP/CoS · SP, WRR · Port shaping · Multi-level QoS |
Ethernet OAM |
802.1ag, 802.3ah |
802.1ag |
Network Management |
||
NMS |
Webserver, mobile phone-based management, eSight, NCE |
|
Environment |
||
Protection class |
IP67 |
|
Operation temperature |
€“40ºC to +60ºC |
|
Corrosion resistance of salt mist |
Complies with the IEC 60068-2-11 standard (4 weeks of salt mist corrosion test) and suitable for seaside scenarios |
|
Security |
||
Encryption |
AES 256-bit |
|
RT access control |
MAC address-based whitelist |
|
Authentication |
RADIUS |