+1 (281) 747-5957
.webp "The OptiX RTN 980L provides a large capacity and supports long haul radio transmission. It can transmit Ethernet and SDH/PDH services separately or in hybrid mode. The OptiX RTN 980L applies to the following scenarios: large-capacity and long haul trunk transmission, large-capacity microwave ring network, or aggregation and backhaul on a mobile network.")
.webp "The OptiX RTN 980L provides a large capacity and supports long haul radio transmission. It can transmit Ethernet and SDH/PDH services separately or in hybrid mode. The OptiX RTN 980L applies to the following scenarios: large-capacity and long haul trunk transmission, large-capacity microwave ring network, or aggregation and backhaul on a mobile network.")
Specification Of Huawei OptiX RTN 905
Huawei OptiX RTN 905 Datasheet
Huawei OptiX RTN 905 Specification
Huawei OptiX RTN 905 Specification |
||
|
Model |
OptiX RTN 905 1E&2E |
OptiX RTN 905 2F |
|
Network Layer |
Access layer |
Access layer |
|
Frequency |
6 to 42 GHz |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56 MHz |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
2 |
2 |
|
Air-Interface Capacity |
520 to 1000 Mbit/s per carrier (none-XPIC) |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
|
Switching Capacity |
8 Gbit/s |
60 Gbit/s |
|
TDM Cross-connect Capacity |
8 × 8 VC-4 |
8 × 8 VC-4 |
|
Interface Type |
E1, STM-1(e/o), FE(o), GE(e/o), 2.5GE(o) |
E1, STM-1(e/o), FE(o), GE(e/o), 2.5GE(o), 10GE(o) |
|
RF Configuration Mode |
• 2 × (1+0) • 2+0 • 1+1 • XPIC |
• 2 × (1+0) • 2+0 • 1+1 • 2CA • XPIC |
|
Ethernet Function |
• Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p) • ISIS, OSPF, BGP, RSVP, LDP • Supports flow control (IEEE 802.3x) • Supports link aggregation groups (IEEE 802.3ad LAG and L1 LAG) • RMON (IETF RFC 2819) |
• Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p) • Supports flow control (IEEE 802.3x) • Supports link aggregation groups (IEEE 802.3ad LAG and L1 LAG) • RMON (IETF RFC 2819) |
|
Service Type |
Native Ethernet services (E-Line service and E-LAN service) PW-carried Ethernet services, MPLS/PWE3, Native IP, Hierarchy VPN |
Native Ethernet services (E-Line service and E-LAN service) PW-carried Ethernet services, MPLS/PWE3, Hierarchy VPN |
|
Key Feature |
Sync Ethernet, PLA/EPLA, 1+1, XPIC, AM, TDM, PWE3/MPLS, SDB, L3VPN |
Sync. Ethernet, PLA/EPLA, 1+1, XPIC, AM, TDM, PWE3/MPLS, SDB, CA |
|
IDU Dimensions |
442 mm × 220 mm × 44 mm |
442 mm × 220 mm × 44 mm |
|
Environment |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°C Humidity: IDU 5% to 95%; ODU 5% to 100% |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°C Humidity: IDU 5% to 95%; ODU 5% to 100% |
|
Power |
-38.4V to -57.6V |
-38.4V to -57.6V |
|
Typical Power Consumption |
55 W (IDU 905 1E) 92 W (IDU 905 2E) |
88.8 W (1×IDU 905 2F + 2×XMC-3 ODU) |
|
Certificate |
CE, RCM, FCC, IC, ETL, MCMC |
CE, RCM, FCC, IC, ETL, MCMC |
