Overview Of S5700-28P-LI-24S-4AH
No Data FoundSpecification Of S5700-28P-LI-24S-4AH
S5700-28P-LI-24S-4AH Datasheet
S5700-28P-LI-24S-4AH Specification
S5700-28P-LI-24S-4AH Specification |
|
Fixed port |
24 10/100/1000Base-T, 4 1000Base-X SFP |
MAC address table |
IEEE 802.1d compliance |
MAC address learning and aging |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address entries: 16K |
|
VLAN |
4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
Ring protection |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
|
SEP |
|
ERPS(G.8032) |
|
STP, RSTP, and MSTP |
|
BPDU protection, root protection, and loop protection |
|
BPDU Tunnel |
|
Reliability |
Ethernet OAM (IEEE 802.3ah and 802.1ag) |
ITU-Y.1731 |
|
DLDP |
|
LACP |
|
MPLS features |
MPLS L3VPN |
MPLS L2VPN(VPWS/VPLS) |
|
MPLS-TE |
|
MPLS QoS |
|
IP routing |
Static routing |
IPv6 features |
Neighbor Discovery (ND) |
Path MTU (PMTU) |
|
IPv6 ping, IPv6 tracert, and IPv6 Telnet |
|
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
MLD v1/v2 snooping |
|
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs |
|
Multicast load balancing among member ports of a trunk |
|
Controllable multicast |
|
Port-based multicast traffic statistics |
|
QoS/ACL |
Rate limiting on packets sent and received by an interface |
Packet redirection |
|
Port-based traffic policing and two-rate three-color CAR |
|
Eight queues on each port |
|
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms |
|
Re-marking of the 802.1p priority and DSCP priority |
|
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports |
|
Security |
User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense |
|
Binding of the IP address, MAC address, interface, and VLAN |
|
Port isolation, port security, and sticky MAC |
|
MFF |
|
Blackhole MAC address entries |
|
Limit on the number of learned MAC addresses |
|
802.1x authentication and limit on the number of users on an interface |
|
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
|
SSH v2.0 |
|
Hypertext Transfer Protocol Secure (HTTPS) |
|
CPU defense |
|
Blacklist and whitelist |
|
Access Security |
DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance |
Virtual cable test |
Port mirroring and RSPAN (remote port mirroring) |
|
Remote configuration and maintenance using Telnet |
|
SNMP v1/v2c/v3 |
|
RMON |
|
Web NMS |
|
HGMP |
|
System logs and alarms of different levels |
|
802.3az EEE |
|
Dying gasp |
|
sFlow |
|
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) |
|
Supports VCMP (Similar to VTP) |
|
Operating environment |
Operating temperature: 0„ƒ€“50„ƒ |
Relative humidity: 10%€“90% (non-condensing) |
|
Input voltage |
AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz |
DC: Rated voltage range: €“48 V to €“60 V, DC Maximum voltage range: €“36 V to €“72 V DC Note: PoE-support switches do not use DC power supplies. |
|
Dimensions (W x D x H) |
442 x 310 x 43.6 mm |
Powerconsumption |
<34.1W |