huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • S5700-52C-SI

    48 Ethernet 10/100/1000 ports, with 1 interface slot
  • Condition:

    New Factory Sealed
  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • S5700-52C-SI Specification

    S5700-52C-SI Specification

    Fixed Ports

    48 × 10/100/1,000 Base-T

    Switching Capacity

    256 Gbit/s

    Forwarding Performance

    132 Mpps

    Extended Slots

    two extended slots, one for an uplink subcard and the other for a stack card

    MAC Address Table

    IEEE 802.1d compliance

    16K MAC address entries

    MAC address learning and aging

    Static, dynamic, and blackhole MAC address entries

    Packet filtering based on source MAC addresses

    VLAN

    4K VLANs

    Guest VLAN and voice VLAN

    GVRP

    MUX VLAN

    VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

    1:1 and N:1 VLAN Mapping

    Reliability

    RRPP ring topology and RRPP multi-instance

    Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

    SEP

    ERPS (G.8032)

    STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

    BPDU protection, root protection, and loop protection

    IP Routing

    Static route, RIPv1, RIPv2, RIPng, and ECMP

    IPv6 Features

    Neighbor Discovery (ND)

    Path MTU (PMTU)

    IPv6 ping, IPv6 tracert, and IPv6 Telnet

    ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

    MLD v1/v2 snooping

    6to4 tunnel, ISATAP tunnel, and manually configured tunnel

    Multicast

    IGMP v1/v2/v3 snooping and IGMP fast leave

    Multicast forwarding in a VLAN and multicast replication between VLANs

    Multicast load balancing among member ports of a trunk

    Controllable multicast

    Port-based multicast traffic statistics

    QoS/ACL

    Rate limiting on packets sent and received by an interface

    Packet redirection

    Port-based traffic policing and two-rate three-color CAR

    Eight queues on each port

    WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms

    Re-marking of the 802.1p priority and DSCP priority

    Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source

    MAC address, destination MAC address, source

    IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

    Rate limiting in each queue and traffic shaping on ports

    Security

    User privilege management and password protection

    DoS attack defense, ARP attack defense, and ICMP attack defense

    Binding of the IP address, MAC address, interface, and VLAN

    Port isolation, port security, and sticky MAC

    Blackhole MAC address entries

    Limit on the number of learned MAC addresses

    802.1x authentication and limit on the number of users on an interface

    AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

    SSH v2.0

    Hypertext Transfer Protocol Secure (HTTPS)

    CPU defense

    Blacklist and whitelist

    802.1x authentication, MAC address authentication, and combined authentication on a per port basis

    Portal authentication on a per VLANIF interface basis

    Management and Maintenance

    Stacking

    MAC Forced Forwarding (MFF)

    Virtual cable test

    SNMP v1/v2c/v3

    RMON

    Web-based NMS

    System logs and alarms of different levels

    Interoperability

    Supports VBST (Compatible with PVST/PVST+/RPVST)

    Supports LNP (Similar to DTP)

    Supports VCMP (Similar to VTP)

    Operating Environment

    Operating temperature: 0°C to 50°C

    Relative humidity: 5% to 95% (non-condensing)

    Input Voltage

    AC:

    Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz

    DC:

    Rated voltage range: –48V to –60V, Maximum voltage range: –36V to –72V

    Note: PoE-support switches do not use DC power supplies.

    Dimensions (W x D x H)

    442 mm x 420 mm x 43.6 mm

    Power Consumption

    < 78W

  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
S5700-52C-SI

48 Ethernet 10/100/1000 ports, with 1 inte...

Overview Specification Support Warranty

Overview Of S5700-52C-SI

No Data Found

Specification Of S5700-52C-SI

S5700-52C-SI Datasheet

S5700-52C-SI Specification

S5700-52C-SI Specification

Fixed Ports

48 × 10/100/1,000 Base-T

Switching Capacity

256 Gbit/s

Forwarding Performance

132 Mpps

Extended Slots

two extended slots, one for an uplink subcard and the other for a stack card

MAC Address Table

IEEE 802.1d compliance

16K MAC address entries

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

Reliability

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

ERPS (G.8032)

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection

IP Routing

Static route, RIPv1, RIPv2, RIPng, and ECMP

IPv6 Features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

MLD v1/v2 snooping

6to4 tunnel, ISATAP tunnel, and manually configured tunnel

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source

MAC address, destination MAC address, source

IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

802.1x authentication, MAC address authentication, and combined authentication on a per port basis

Portal authentication on a per VLANIF interface basis

Management and Maintenance

Stacking

MAC Forced Forwarding (MFF)

Virtual cable test

SNMP v1/v2c/v3

RMON

Web-based NMS

System logs and alarms of different levels

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)

Supports VCMP (Similar to VTP)

Operating Environment

Operating temperature: 0°C to 50°C

Relative humidity: 5% to 95% (non-condensing)

Input Voltage

AC:

Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz

DC:

Rated voltage range: –48V to –60V, Maximum voltage range: –36V to –72V

Note: PoE-support switches do not use DC power supplies.

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

Power Consumption

< 78W

Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
why orm system image
why orm system image
Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

Standard Services
Standard Services image
Standard Services image
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
×
ORM Registered Companies