huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • S5710-28C-EI

    S5710-28C-EI(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+,without power module)
  • List Price:

      $8,014 (90% OFF)

  • $801
  • Condition:

    New Factory Sealed
  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • S5710-28C-EI Specification

    S5710-28C-EI Specification

    Fixed port

    24x10/100/

    1000Base-T

    Extended slot

    S5700C Provide two extended slots, one for an uplink subcard and the other for a stack card.

    S5710C Provide two extended slots for uplink subcards.

    MAC address table

    IEEE 802.1d compliance

    32K MAC

    MAC address learning and aging

    Static, dynamic, and blackhole MAC address entries

    Packet filtering based on source MAC addresses

    VLAN

    4K VLANs

    Guest VLAN and voice VLAN

    GVRP

    MUX VLAN

    VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

    1:1 and N:1 VLAN Mapping

    Reliability

    RRPP ring topology and RRPP multi-instance

    Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level

    protection switchover

    SEP

    ERPS (G.8032)

    BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM

    STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)

    BPDU protection, root protection, and loop protection

    E-Trunk

    IP routing

    Static routing, RIPv1/v2, RIGng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, and ECMP

    IPv6 features

    Neighbor Discovery (ND)

    Path MTU (PMTU)

    IPv6 ping, IPv6 tracert, and IPv6 Telnet

    ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol

    type

    MLD v1/v2 snooping

    IPv4 and IPv6 dual stack

    6to4 tunnel, ISATAP tunnel, and manually configur ed tunnel

    Multicast

    IGMP v1/v2/v3 snooping and IGMP fast leave

    Multicast forwarding in a VLAN and multicast replication between VLANs

    Multicast load balancing among member ports of a trunk

    Controllable multicast

    Port-based multicast traffic statistics

    IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM

    MSDP

    QoS/ACL

    Rate limiting on packets sent and received by an interface

    Packet redirection

    Port-based traffic policing and two-rate three-color CAR

    Eight queues on each port

    WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

    WRED (supported by the S5710-EI)

    Re-marking of the 802.1p priority and DSCP priority

    Packet filtering at Layer 2 to Layer 4, filtering out invalid fr ames based on the source MAC

    address, destination MAC address, source IP address, destination IP address, TCP/UDP port

    number, protocol type, and VLAN ID

    Rate limiting in each queue and traffic shaping on ports

    Security

    User privilege management and password protection

    DoS attack defense, ARP attack defense, and ICMP attack defense

    Binding of the IP address, MAC address, interface, and VLAN

    Port isolation, port security, and sticky MAC

    Blackhole MAC address entries

    Limit on the number of learned MAC addresses

    802.1x authentication and limit on the number of users on an interface

    AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

    SSH v2.0

    Hypertext Transfer Protocol Secure (HTTPS)

    CPU defense

    Blacklist and whitelist

    Management and maintenance

     

    iStack

    MAC Forced Forwarding (MFF)

    Virtual cable test

    SNMP v1/v2c/v3

    RMON

    Web NMS

    System logs and alarms of different levels

    NetStream (supported by S5710-EI)

    sFlow

    Interoperability

    Supports VBST (Compatible with PVST/PVST+/RPVST)

    Supports LNP (Similar to DTP)

    Supports VCMP (Similar to VTP)

    Operating environment

     

    Operating temperature: 0oC€“50oC

    Relative humidity: 5%€“95% (non-condensing)

    Input voltage

    AC:

    Rated voltage range: 100 V to 240 V AC, 50/60 Hz

    Maximum voltage range: 90 V to 264 V AC, 50/60 Hz

    DC:

    Rated voltage range: €“48 V to €“60 V, DC

    Maximum voltage range: €“36 V to €“72 V, DC

    Note: PoE-support switches do not use DC power supplies.

    Dimensions(W x D x H)

    442 mm x 420 mm x 43.6 mm

    Power consumption

    Non-PoE model:< 60W

    PoE model: < 842W(PoE: 740W)

  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
S5710-28C-EI

S5710-28C-EI(24 Ethernet 10/100/1000 ports...

Price: $801
List Price: $8,014 (90% OFF)
Overview Specification Support Warranty

Overview Of S5710-28C-EI

No Data Found

Specification Of S5710-28C-EI

S5710-28C-EI Datasheet

S5710-28C-EI Specification

S5710-28C-EI Specification

Fixed port

24x10/100/

1000Base-T

Extended slot

S5700C Provide two extended slots, one for an uplink subcard and the other for a stack card.

S5710C Provide two extended slots for uplink subcards.

MAC address table

IEEE 802.1d compliance

32K MAC

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

Reliability

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level

protection switchover

SEP

ERPS (G.8032)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM

STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)

BPDU protection, root protection, and loop protection

E-Trunk

IP routing

Static routing, RIPv1/v2, RIGng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, and ECMP

IPv6 features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol

type

MLD v1/v2 snooping

IPv4 and IPv6 dual stack

6to4 tunnel, ISATAP tunnel, and manually configur ed tunnel

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM

MSDP

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

WRED (supported by the S5710-EI)

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layer 2 to Layer 4, filtering out invalid fr ames based on the source MAC

address, destination MAC address, source IP address, destination IP address, TCP/UDP port

number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

Management and maintenance

 

iStack

MAC Forced Forwarding (MFF)

Virtual cable test

SNMP v1/v2c/v3

RMON

Web NMS

System logs and alarms of different levels

NetStream (supported by S5710-EI)

sFlow

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)

Supports VCMP (Similar to VTP)

Operating environment

 

Operating temperature: 0oC€“50oC

Relative humidity: 5%€“95% (non-condensing)

Input voltage

AC:

Rated voltage range: 100 V to 240 V AC, 50/60 Hz

Maximum voltage range: 90 V to 264 V AC, 50/60 Hz

DC:

Rated voltage range: €“48 V to €“60 V, DC

Maximum voltage range: €“36 V to €“72 V, DC

Note: PoE-support switches do not use DC power supplies.

Dimensions(W x D x H)

442 mm x 420 mm x 43.6 mm

Power consumption

Non-PoE model:< 60W

PoE model: < 842W(PoE: 740W)

Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
why orm system image
why orm system image
Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

Standard Services
Standard Services image
Standard Services image
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
×
ORM Registered Companies