huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • S6720-52X-PWH-SI

    S6720-52X-PWH-SI(48 Ethernet 100M/1/2.5/5/10G ports,4 10 Gig SFP+,PoE++,without power module)
  • Condition:

    New Factory Sealed
  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • S6720-52X-PWH-SI Specification

    S6720-52X-PWH-SI Specification

    Switching Capacity

    2.56 Tbit/s

    Forwarding Performance

    480 Mpps

    Fixed ports

    48x100M/1G/2.5G/5G/10G

    Base-T Ethernet ports,

    4x10GE SFP+

    Extended slots

    Not supported

    MAC address table

    32K

    MAC address learning and aging

    Static, dynamic, and blackhole MAC address entries

    Packet filtering based on source MAC addresses

    VLAN features

    4K VLANs

    Guest VLAN and voice VLAN

    VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

    VLAN mapping

    Super VLAN

    Basic QinQ and selective QinQ

    IPv4 routing

    Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGP

    VRRP

    Policy-based routing

    Routing policies

    IPv6 routing

    Static routing

    RIPng

    OSPFv3

    BGP4+

    ISISv6

    IPv6 features

    Neighbor Discovery (ND) and ND snooping

    IPv6 Ping

    VRRP6

    DHCPv6 snooping, DHCPv6 server, and DHCPv6 relay

    MLDv1 and MLDv2

    PIM-DM for IPv6

    PIM-SM for IPv6

    6 Over 4 tunnels

    Multicast

    IGMP V1/V2/V3 snooping

    Fast leave

    IGMP snooping proxy

    MLD snooping

    Port-based multicast traffic suppression

    Inter-VLAN multicast replication

    Controllable multicast

    IGMP v1/v2/v3

    PIM-SM and PIM-DM

    Multicast Source Discovery Protocol (MSDP)

    Multicast routing policies

    QoS/ACL

    Traffic classification based on ACLs

    Traffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source MAC addresses, and Ethernet types

    Access control after traffic classification

    Traffic policing based on traffic classifiers

    Re-marking based on traffic classifiers

    Class-based packet queuing

    Associating traffic classifiers with traffic behaviors

    Rate limiting on inbound and outbound ports

    Traffic shaping based on ports and queues

    Tail drop

    Priority Queuing (PQ)

    Deficit Round Robin (DRR)

    PQ + DRR scheduling

    Weighted Round Robin (WRR)

    PQ + WRR scheduling

    Reliability

    STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

    BPDU protection, root protection, and loop protection

    RRPP ring topology and RRPP multi-instance

    Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection

    switchover

    Smart Ethernet Protection (SEP)

    G.8032 Ethernet Ring Protection Switching (ERPS)

    BFD for OSPF, IS-IS, VRRP, and PIM protocols

    Enhanced trunk (E-trunk)

    Security features

    Defense against DoS, ARP, and ICMP attacks

    Binding of the IP address, MAC address, port number, and VLAN ID of a user

    Port isolation, port security, and sticky MAC

    MAC-Forced Forwarding (MACFF)

    Limit on the number of learned MAC addresses

    IEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybrid

    authentication

    Authentication methods, including AAA, RADIUS, and HWTACACS

    CPU defense

    MACSec

    Super Virtual Fabric (SVF)

    SVF Parent and Client

    Management and maintenance

     

    iStack (using service ports as stack ports)

    Virtual Cable Test (VCT)

    Ethernet OAM (IEEE 802.3ah and 802.1ag)

    SNMPv1/v2c/v3

    RMON

    Web-based network management system and relevant features

    System logs and multi-level alarms

    GVRP

    MUX VLAN

    sFlow

    Hypertext Transfer Protocol Secure (HTTPS)

    SSH1.5/SSH2

    Operating environment

     

    Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature reduces

    by 1°C every time the altitude increases by 220 m.

    Relative humidity: 5%–95% (noncondensing)

    Input voltage

    AC:

    • Rated voltage range: 100 V to 240 V AC, 50/60 Hz

    • Maximum voltage range: 90 V to 264 V AC, 47/63Hz

    DC:

    • Rated voltage range: –48 V to –60 V DC

    • Maximum voltage range: –36 V to –72 V DC

    Dimensions (W x D x H, mm)

    442 x 507 x 44.4

    Height

    1 U

    Typical power consumption

    159.5W

    Maximum power consumption (W)

    • 650W DC without PD: 207.36W

    • 1150W AC /1000W AC (without PD): 236.8W

  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
S6720-52X-PWH-SI

S6720-52X-PWH-SI(48 Ethernet 100M/1/2.5/5/...

Overview Specification Support Warranty

Overview Of S6720-52X-PWH-SI

No Data Found

Specification Of S6720-52X-PWH-SI

S6720-52X-PWH-SI Datasheet

S6720-52X-PWH-SI Specification

S6720-52X-PWH-SI Specification

Switching Capacity

2.56 Tbit/s

Forwarding Performance

480 Mpps

Fixed ports

48x100M/1G/2.5G/5G/10G

Base-T Ethernet ports,

4x10GE SFP+

Extended slots

Not supported

MAC address table

32K

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN features

4K VLANs

Guest VLAN and voice VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

VLAN mapping

Super VLAN

Basic QinQ and selective QinQ

IPv4 routing

Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGP

VRRP

Policy-based routing

Routing policies

IPv6 routing

Static routing

RIPng

OSPFv3

BGP4+

ISISv6

IPv6 features

Neighbor Discovery (ND) and ND snooping

IPv6 Ping

VRRP6

DHCPv6 snooping, DHCPv6 server, and DHCPv6 relay

MLDv1 and MLDv2

PIM-DM for IPv6

PIM-SM for IPv6

6 Over 4 tunnels

Multicast

IGMP V1/V2/V3 snooping

Fast leave

IGMP snooping proxy

MLD snooping

Port-based multicast traffic suppression

Inter-VLAN multicast replication

Controllable multicast

IGMP v1/v2/v3

PIM-SM and PIM-DM

Multicast Source Discovery Protocol (MSDP)

Multicast routing policies

QoS/ACL

Traffic classification based on ACLs

Traffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source MAC addresses, and Ethernet types

Access control after traffic classification

Traffic policing based on traffic classifiers

Re-marking based on traffic classifiers

Class-based packet queuing

Associating traffic classifiers with traffic behaviors

Rate limiting on inbound and outbound ports

Traffic shaping based on ports and queues

Tail drop

Priority Queuing (PQ)

Deficit Round Robin (DRR)

PQ + DRR scheduling

Weighted Round Robin (WRR)

PQ + WRR scheduling

Reliability

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection

switchover

Smart Ethernet Protection (SEP)

G.8032 Ethernet Ring Protection Switching (ERPS)

BFD for OSPF, IS-IS, VRRP, and PIM protocols

Enhanced trunk (E-trunk)

Security features

Defense against DoS, ARP, and ICMP attacks

Binding of the IP address, MAC address, port number, and VLAN ID of a user

Port isolation, port security, and sticky MAC

MAC-Forced Forwarding (MACFF)

Limit on the number of learned MAC addresses

IEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybrid

authentication

Authentication methods, including AAA, RADIUS, and HWTACACS

CPU defense

MACSec

Super Virtual Fabric (SVF)

SVF Parent and Client

Management and maintenance

 

iStack (using service ports as stack ports)

Virtual Cable Test (VCT)

Ethernet OAM (IEEE 802.3ah and 802.1ag)

SNMPv1/v2c/v3

RMON

Web-based network management system and relevant features

System logs and multi-level alarms

GVRP

MUX VLAN

sFlow

Hypertext Transfer Protocol Secure (HTTPS)

SSH1.5/SSH2

Operating environment

 

Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature reduces

by 1°C every time the altitude increases by 220 m.

Relative humidity: 5%–95% (noncondensing)

Input voltage

AC:

• Rated voltage range: 100 V to 240 V AC, 50/60 Hz

• Maximum voltage range: 90 V to 264 V AC, 47/63Hz

DC:

• Rated voltage range: –48 V to –60 V DC

• Maximum voltage range: –36 V to –72 V DC

Dimensions (W x D x H, mm)

442 x 507 x 44.4

Height

1 U

Typical power consumption

159.5W

Maximum power consumption (W)

• 650W DC without PD: 207.36W

• 1150W AC /1000W AC (without PD): 236.8W

Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
why orm system image
why orm system image
Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

Standard Services
Standard Services image
Standard Services image
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
×
ORM Registered Companies