+1 (281) 747-5957
Overview Of WS-C2960L-48TS-LL
The Cisco Catalyst 2960 series WS-C2960L-48TS-LL switches are powerful network devices designed to meet the demands of modern enterprises. Packed with features to enhance connectivity and manageability, these switches are ideal for small to medium-sized enterprises seeking reliable and efficient networking solutions. These switches support Power over Ethernet, allowing you to power your connected devices, such as IP cameras, phones, and wireless access points, directly through the network cable, eliminating the need for separate power sources. The "LL" in WS-C2960L-48TS-LL signifies the Lite Lite model, providing a cost-effective solution without compromising essential features. This makes it an excellent choice for budget-conscious businesses. Moreover, with 48 Ethernet ports, the Cisco Catalyst 2960 series WS-C2960L-48TS-LL switches provide ample connectivity for your devices, ensuring a seamless and efficient data flow within your network.
Specification Of WS-C2960L-48TS-LL
WS-C2960L-48TS-LL Datasheet
| 10/100/1000 Ethernet Interfaces | 48 |
| Uplink Interfaces | 4 SFP |
| Available PoE Power | - |
| Fanless | Yes |
| RJ45 Ethernet | 1 |
| USB mini-B | 1 |
| USB-A port for storage and Bluetooth console | 1 |
| Flash Memory | 256 MB |
| CPU | ARMv7 800 MHz |
| DRAM | 512 MB |
| Forwarding bandwidth | 52 Gbps |
| Maximum active VLANs | 64 |
| VLAN IDs available | 4094 |
| Maximum transmission unit (MTU) - L3 packet | 9198 bytes |
| Jumbo frame - Ethernet frame | 10,240 bytes |
| Switching bandwidth | 104 Gbps |
| Unicast MAC addresses | 8k |
| Maximum SPAN sessions | 1 |
| MTBF in hours (Data) | 1,370,769 |
| Forwarding Rate 64-Byte L3 Packets,Millions of packets per second | 77.38 Mpps |
| Dimensions (H x W x D) | 1.73 x 9.45 x 17.56 in (4.4 x 24 x 44.5 cm) |
| Weight (Approximate) | 7.21 lb (3.27 kg) |
| Ethernet Interfaces | 10BASE-T ports RJ-45 connectors,2-pair Category 3,4,or 5 unshielded twisted-pair (UTP) cabling100BASE-TX ports RJ-45 connectors,2-pair Category 5 UTP cabling1000BASE-T ports RJ-45 connectors,4-pair Category 5 UTP cabling1000BASE-T SFP-based ports RJ-45 connectors,4-pair Category 5 UTP cabling |
| Indicator LEDs | Per-port status Link integrity,disabled,activity,speed,and full duplexSystem status,Port Status,RPS,link duplex,and link speed |
| Console | Cisco Catalyst console cables
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 |
| Power | The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.Use the supplied AC power cord to connect the AC power connector to an AC power outlet.The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle. |
| Voltage (Autoranging) | 100 to 240 VAC |
| Current (Amperes) | 0.29A - 0.48A |
| Frequency | 50 to 60Hz |
| Power Rating (kVA) | 0.04 |
| DC Input Voltages (RPS Input) | 2A at 12V |
| Power Consumption | 0% traffic 14.9
10% traffic 19.3 100% traffic 19.3 ATIS weighted average 17.8 |
