huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • Huawei CE5810-48T4S-EI Switch (48-Port GE RJ45,4-Port 10G SFP+,2*FAN Box,Port-side Intaket,Without Power Module)

    Part Number:

    CE5810-48T4S-EI-B

  • Condition:

    New Factory Sealed

  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • CE5810-48T4S-EI-B Specification

    CE5810-48T4S-EI-B Specification

    Base-T Ports

     48

    SFP+ Ports

     4

    QSFP+ Ports

     -

    Switching Capacity

    176 Gbit/s

    Forwarding Rates

    132 Mpps

    Airflow Design

    Front-to-back or back-to-front

    Device Virtualization

    iStack 

    Super Virtual Fabric (SVF) 

    Network Virtualization

    M-LAG

    TRILL (CE5855 & CE5850)

    VM Awareness

    Agile Controller

    SDN

    Open Programmability System (OPS)

    Traffic Analysis

    NetStream

    sFlow

    VLAN

    Adding access, trunk, and hybrid interfaces to VLANs

    Default VLAN

    QinQ

    MUX VLAN

    GVRP

    ACL

    ingress: 4.5k
    egress: 1k

    MAC Address Table

    maximum: 32k

    Dynamic learning and aging of MAC addresses

    Static, dynamic, and black hole MAC address entries

    Packet filtering based on source MAC addresses

    MAC address limiting based on ports and VLANs

    ARP (maximum)

    8k

    IPv4 FIB (maximum)

    12k

    IP Routing

    IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

    IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855)

    IPv6 FIB (maximum)

    6k

    IPv6

    IPv6 Neighbor Discovery (ND) (not supported by CE5855)

    Path MTU Discovery (PMTU) (not supported by CE5855)

    TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6

    Multicast FIB (maximum)

    8k

    Multicast

    IGMP, PIM-SM, PIM-DM, MSDP, and MBGP

    IGMP snooping

    IGMP proxy

    Fast leave of multicast member interfaces

    Multicast traffic suppression

    Multicast VLAN

    Reliability

    LACP

    STP, RSTP, VBST, MSTP

    BPDU protection, root protection, and loop protection

    Smart Link and multi-instance

    DLDP

    ERPS (G.8032)

    VRRP, VRRP load balancing, and BFD for VRRP

    BFD for BGP/IS-IS/OSPF/Static route

    QoS

    Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority

    Actions of ACL, CAR, re-marking, and scheduling

    Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR

    Congestion avoidance mechanisms, including WRED and tail drop

    Traffic shaping

    Configuration and Maintenance

    Console, Telnet, and SSH terminals

    Network management protocols, such as SNMPv1/v2c/v3

    File upload and download through FTP and TFTP

    BootROM upgrade and remote upgrade

    802.3az Energy Efficient Ethernet (EEE)

    Hot patches

    User operation logs

    Zero-Touch Provisioning (ZTP)

    Security and Management

    802.1x authentication

    Command line authority control based on user levels, preventing unauthorized users from using commands

    DoS, ARP, and ICMP attack defenses

    Port isolation, port security, and sticky MAC

    Binding of the IP address, MAC address, interface number, and VLAN ID

    Authentication methods, including AAA, RADIUS, and HWTACACS

    Remote Network Monitoring (RMON)

    Dimensions (W x D x H)

    442 mm x 420 mm x 43.6 mm

    Weight (fully loaded)

    8.2 kg (18.1 lb)

    Environmental Parameters

    Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)

    Storage temperature: -40°C to 70°C (-40°F to 158°F)

    Relative humidity: 5% to 95%, non-condensing

    Operating Voltage

     AC: 90V to 290V

    DC: -38.4V to -72V

    Maximum Power Consumption

    92W

  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
CE5810-48T4S-EI-B

Huawei CE5810-48T4S-EI Switch (48-Port GE ...

Overview Specification Support Warranty

Overview

No Data Found

Specification

CE5810-48T4S-EI-B Specification

CE5810-48T4S-EI-B Specification

Base-T Ports

 48

SFP+ Ports

 4

QSFP+ Ports

 -

Switching Capacity

176 Gbit/s

Forwarding Rates

132 Mpps

Airflow Design

Front-to-back or back-to-front

Device Virtualization

iStack 

Super Virtual Fabric (SVF) 

Network Virtualization

M-LAG

TRILL (CE5855 & CE5850)

VM Awareness

Agile Controller

SDN

Open Programmability System (OPS)

Traffic Analysis

NetStream

sFlow

VLAN

Adding access, trunk, and hybrid interfaces to VLANs

Default VLAN

QinQ

MUX VLAN

GVRP

ACL

ingress: 4.5k
egress: 1k

MAC Address Table

maximum: 32k

Dynamic learning and aging of MAC addresses

Static, dynamic, and black hole MAC address entries

Packet filtering based on source MAC addresses

MAC address limiting based on ports and VLANs

ARP (maximum)

8k

IPv4 FIB (maximum)

12k

IP Routing

IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855)

IPv6 FIB (maximum)

6k

IPv6

IPv6 Neighbor Discovery (ND) (not supported by CE5855)

Path MTU Discovery (PMTU) (not supported by CE5855)

TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6

Multicast FIB (maximum)

8k

Multicast

IGMP, PIM-SM, PIM-DM, MSDP, and MBGP

IGMP snooping

IGMP proxy

Fast leave of multicast member interfaces

Multicast traffic suppression

Multicast VLAN

Reliability

LACP

STP, RSTP, VBST, MSTP

BPDU protection, root protection, and loop protection

Smart Link and multi-instance

DLDP

ERPS (G.8032)

VRRP, VRRP load balancing, and BFD for VRRP

BFD for BGP/IS-IS/OSPF/Static route

QoS

Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority

Actions of ACL, CAR, re-marking, and scheduling

Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR

Congestion avoidance mechanisms, including WRED and tail drop

Traffic shaping

Configuration and Maintenance

Console, Telnet, and SSH terminals

Network management protocols, such as SNMPv1/v2c/v3

File upload and download through FTP and TFTP

BootROM upgrade and remote upgrade

802.3az Energy Efficient Ethernet (EEE)

Hot patches

User operation logs

Zero-Touch Provisioning (ZTP)

Security and Management

802.1x authentication

Command line authority control based on user levels, preventing unauthorized users from using commands

DoS, ARP, and ICMP attack defenses

Port isolation, port security, and sticky MAC

Binding of the IP address, MAC address, interface number, and VLAN ID

Authentication methods, including AAA, RADIUS, and HWTACACS

Remote Network Monitoring (RMON)

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

Weight (fully loaded)

8.2 kg (18.1 lb)

Environmental Parameters

Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)

Storage temperature: -40°C to 70°C (-40°F to 158°F)

Relative humidity: 5% to 95%, non-condensing

Operating Voltage

 AC: 90V to 290V

DC: -38.4V to -72V

Maximum Power Consumption

92W

Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
Cost Efficient
Cost
 Efficient

ORM Systems offers top-tier IT products at affordable prices.

Return and Exchange
Return
 and Exchange

ORM Systems provide a flexible return and timely exchange policy.

Authentic Products
100% 
Authentic Products

We deliver authentic products that exceed certified standards.

Extended Warranty
Extended 
Warranty

We offer an extended replacement warranty.

Easy & Secure Payment
Easy and 
Secure Payment

We offer easy and secure payment methods.

Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

PRESALE DESIGN
PRESALE DESIGN

Our professionals actively listen and demonstrate their technical knowledge and expertise to understand your requirements and challenges to design the best enterprise level solutions.

IMPLEMENTATION
IMPLEMENTATION

We proceed to the implementation process, outlining the scope and allocating the necessary resources to ensure execution and efficiency while prioritizing quality and reliability.

INFRASTRUCTURE SUPPORT
INFRASTRUCTURE SUPPORT

Our engineers are committed to extending service beyond the implementation. We provide 24/7 after-sales support in an effective manner for smooth operations.

Standard Services
Warehouse
Warehouse
Our well-maintained warehouses consist of millions of dollars of goods in stock, ready to ship operations immediately across the globe.
Customer Service
Customer Service
Our experts are dedicated to delivering eternal support and immediate assistance for presales and aftersales via call, email, and live chat.
Packaging
Packaging
We at ORM take pride in the safe and secure packaging of each product to guarantee a seamless delivery experience for our valued customers.
Show More
Checking
Checking
Our quality assurance team employs best practices to thoroughly examine and validate the product's consistency to robust quality standards.
Shipping
Shipping
We prioritize secure, efficient, and transparent shipping services with easy monitoring access to your shipment through a unique tracking code.
Branch Offices
Branch Offices
We have established our global presence through operational branches and warehouses in the UK, US, Europe, and the Middle East.
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
ORM Registered Companies