Cisco Catalyst 9105AX Wall Plate, with internal antennas; Wi-Fi 6; 2x2 MIMO with two spatial streams, Z Domain

C9105AXW-Z Specification

Software

Catalyst 9105AXW

●  Cisco Unified Wireless Network Software Release 8.10MR3 or later

●  Cisco IOS ® XE Software Release 17.3.1 or later

Supported wireless LAN controllers

●  Cisco Catalyst 9800 Series Wireless Controllers

●  Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

●  2x2 MIMO with two spatial streams

●  Maximal Ratio Combining (MRC)

●  802.11n and 802.11a/g

●  20- and 40-MHz channels

●  PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

●  802.11 Dynamic Frequency Selection (DFS)

●  Cyclic Shift Diversity (CSD) support

802.11ac

●  2x2 downlink MU-MIMO with two spatial streams

●  MRC

●  802.11ac beamforming

●  20-, 40-, 80- MHz channels

●  PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

802.11ax

●  2x2 uplink/downlink MU-MIMO with two spatial streams

●  Uplink/downlink OFDMA

●  TWT

●  BSS coloring

●  MRC

●  802.11ax beamforming

●  20-, 40-, 80- channels

●  PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

Integrated antenna

Catalyst 9105AXW

●  2.4 GHz: Peak gain 3 dBi, internal antenna

●  5 GHz: Peak gain 5 dBi, internal antenna

Interfaces

Catalyst 9105AXW

●  1x 100/1000/2500 Base-T (Ethernet) Uplink Interface

●  3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)

●  Management console port (RJ-45)

●  USB 2.0 at 4.5W

●  Passthru Port

Indicators

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions
(W x L x H)

●  Access point (without mounting brackets):

◦    C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)