United States
Q
What are Cisco Catalyst 8000 Series Edge Platforms Modules & Cards?
A
Cisco Catalyst 8000 Series Edge Platforms Modules & Cards are modular interface and service components that enhance connectivity, security, and performance on Cisco Catalyst 8000 edge routers.
Q
Which interface modules are available for Catalyst 8000 Series Edge Platforms?
A
Available interface modules include modular Ethernet, fiber, and T1/E1 WAN cards, supporting speeds from 1 Gbps to 100 Gbps for scalable edge connectivity.
Q
How do service modules improve Catalyst 8000 Edge Platform functionality?
A
Service modules enable built-in security, WAN optimization, and advanced telemetry on Catalyst 8000 routers without requiring external appliances.
Q
How can I determine module compatibility with my Catalyst 8000 router?
A
Check the Cisco Hardware Installation Guide or the Cisco Feature Navigator to verify platform–specific module and card compatibility.
Q
What licensing is required for advanced features on Catalyst 8000 modules?
A
Advanced services like SD-WAN, security, and analytics require Cisco DNA Advantage or Cisco DNA Premier licensing on the Catalyst 8000 platform.
Q
How do I install a module in the Cisco Catalyst 8000 Series?
A
Power off the router, insert the module into the designated slot, secure with screws, then power on and verify module status via CLI.
Q
Can I hot-swap interface cards on the Catalyst 8000 Edge Platform?
A
No, hot-swap is not supported; you must power down the device before adding or removing modules to avoid service disruption.
Q
What performance can I expect from Catalyst 8000 service modules?
A
Service module throughput ranges from 5 Gbps to 100 Gbps, depending on module type and enabled features.
Q
Do Catalyst 8000 modules support advanced security features?
A
Yes, they support Cisco Secure Firewall, IOS XE Zone-Based Firewall, IPS, and secure segmentation for edge deployments.
Q
How do I update firmware on Catalyst 8000 modules?
A
Use Cisco IOS XE software images and perform an in-place upgrade via CLI or Cisco DNA Center for automated module firmware management.
Q
What monitoring tools support Catalyst 8000 Series modules?
A
Modules can be monitored with SNMP, NETCONF/YANG, streaming telemetry, and Cisco DNA Center for real-time performance insights.
Q
How do I choose the right Catalyst 8000 module for my WAN requirements?
A
Match your bandwidth needs, interface type, and feature set—such as security or SD-WAN support—to the module specifications in the product data sheet.
Q
What is the mean time between failures (MTBF) for Catalyst 8000 modules?
A
MTBF varies by module type but typically exceeds 100,000 hours under nominal operating conditions, as specified in the hardware datasheet.
Q
Are third-party modules supported on Catalyst 8000 Edge Platforms?
A
No, only Cisco-qualified modules and cards are supported to ensure full interoperability and warranty compliance.
Q
How does Cisco support Catalyst 8000 Series Modules & Cards?
A
Cisco provides 24/7 technical support, software updates, and a limited lifetime warranty for genuine Cisco modules and cards.
