ST8000VX0002

ST8000VX0002 Specification

Formatted capacity (512 bytes/sector)

8000GB (8TB)

Guaranteed sectors

15,628,053,168

Heads

12

Disks

6

Bytes per sector

(4K physical emulated at 512-byte sectors)

4096

Default sectors per track

63

Default read/write heads

16

Default cylinders

16,383

Recording density (max)

2241kFCI

Track density (avg)

362ktracks/in

Areal density (avg)

1333Gb/in2

Internal data transfer rate (max)

2546Mb/s

Average data rate, read/write (MB/s)

180MB/s

Maximum sustained data rate, OD read (MB/s)

230MB/s

ATA data-transfer modes supported

 

PIO modes: 0 to 4

Multiword DMA modes: 0 to 2

Ultra DMA modes 0 to 6

I/O data-transfer rate (max)

600MB/s

Cache buffer

256MB

Height (max)

26.1mm / 1.028 in

Width (max)

101.85mm /4.010 in

Length (max)

146.99mm / 5.787 in

Average latency

4.0ms

Average seek, read (typical)

Average seek, write (typical)

<8.5ms typical

<9.5ms typical

Startup current (typical) 12V

<=1.8A

Voltage tolerance (including noise)

5V: ±5%

12V: ±10%

Non-Operating (Ambient °C)

–40° to 70

Operating temperature (Drive case min °C)

5

Operating temperature (Drive case max °C)

70

Temperature gradient

20°C per hour max (operating)

30°C per hour max (nonoperating)

Relative humidity

5% to 90% (operating)

5% to 95% (nonoperating)

Relative humidity gradient (max)

30% per hour

Wet bulb temperature (max)

26°C max (operating)

29°C max (nonoperating)

Altitude, operating

–304m to 3048m(–1000 ft to 10,000 ft)

Altitude, non-operating

(below mean sea level, max)

–304m to12,192m(–1000ft to 40,000+ ft)

Operational shock (max)

70 Gs at 2ms (read)

40 Gs at 2ms (write)

Non-operational shock (max)

250 Gs at 2ms

Vibration, operating

 

2Hz to 22Hz: 0.25 Gs, Limited displacement

22Hz to 350Hz: 0.50 Gs

350Hz to 500Hz: 0.25 Gs

Vibration, non-operating

 

5Hz to 22Hz: 3.0 Gs

22Hz to 350Hz: 3.0 Gs

350Hz to 500Hz: 3.0 Gs

Drive acoustics, sound power

Idle

2.7 bels (typical)

2.8 bels (max)

Seek

2.8 bels (typical)

2.9 bels (max)

Non-recoverable read errors

1 per 10^15 bits read

Mean Time Between Failure (MTBF)

1,000,000 hrs

Rated Workload

 

Average annualized workload rating: <180 TB/year.

The AFR specification for the product assumes the I/O workload does not exceed the average annualized workload rate limit of 180 TB/year. Workloads exceeding the annualized rate may degrade the product AFR and impact reliability as experienced by the particular application. The average annualized workload rate limit is in units of TB per calendar year.

Load/unload cycles (25°C, 50% rel. humidity)

300,000 at 25°C, 50% rel. humidity

Supports hotplug operation per the

Serial ATA Revision 3.2 specification

Yes