Overview Of AT-MWS600AP
The MWS600AP wireless Access Point features IEEE802.11n dual-band radio and embedded antennas. It supports two IEEE802.11n spatial streams, with throughput of 300Mbps in the 2.4GHz band and 300Mbps in the 5GHz band.Specification Of AT-MWS600AP
AT-MWS600AP Datasheet
Features | |
---|---|
2.4 GHz | Y |
5 GHz | Y |
Maximum data transfer rate | 300 Mbit/s |
Networking standards | IEEE 802.11a,IEEE 802.11ac,IEEE 802.11ad,IEEE 802.11az,IEEE 802.11n |
Automatic channel selection | Y |
Modulation | 16-QAM,64-QAM,256-QAM,BPSK,CCK,DBPSK,DQPSK,OFDM,QPSK |
Quality of Service (QoS) support | Y |
Design | |
Placement | Ceiling,Table,Wall |
Product colour | White |
LED indicators | Y |
Internal | N |
Operational conditions | |
Operating temperature (T-T) | 0 - 50 °C |
Storage temperature (T-T) | -40 - 70 °C |
Operating relative humidity (H-H) | 5 - 90 % |
Storage relative humidity (H-H) | 5 - 95 % |
Security | |
Security algorithms | 64-bit WEP,128-bit WEP,152-bit WEP,802.1x RADIUS,EAP-AKA,EAP-FAST,EAP-SIM,EAP-TLS,MSCHAPv2,PEAP,WPA,WPA-AES,WPA-TKIP,WPA2,WPA2-AES,WPA2-TKIP |
Service Set Identifier (SSID) features | SSID broadcast on/off |
Weight & dimensions | |
Width | 161.2 mm |
Depth | 161.2 mm |
Height | 38 mm |
Weight | 280 g |
Ports & interfaces | |
Ethernet LAN (RJ-45) ports | 1 |
DC-in jack | Y |
Management features | |
Syslog | Y |
Firmware upgradeable | Y |
Power | |
Power over Ethernet (PoE) | Y |
Power consumption (typical) | 11 W |
Heat dissipation | 37.92 BTU/h |