+1 (281) 747-5957
Overview Of C9300L-24UXG4X-10E
Cisco Catalyst Switch C9300L-24UXG4X-10E is the most stackable switch for security, IoT, mobility, and cloud and serves as the building block for Cisco's premier corporate architecture, Software-Defined Access. The Cisco Catalyst C9300L-24UXG4X-10E Switch provides 24 x 10/100/1000 PoE+ 8xmGig Multi Gigabit copper ports with a default 1100W AC power supply, 272 switching capability, and 592 with stacking, along with 4 x 10G fixed uplink configurations. It has an optimised platform with improved architecture and enhanced memory.
Specification Of C9300L-24UXG4X-10E
C9300L-24UXG4X-10E Datasheet
| Product Description | C9300L 24p PoE+ 8xmGig,Netw Ess,4x10G Uplink |
| FRU Power Supply | Yes |
| FRU Fans | Yes |
| Modular Uplinks | No |
| Stacking Bandwidth Support | 320 Gbps |
| Cisco Stack Power | No |
| Catalyst 9800 Embedded WLC | Yes (50 APs) |
| SD-Access Support | Yes (256 Virtual Networks) |
| Total 10/100/1000,Multigigabit copper or SFP Fiber | 24 PoE+ 8xmGig |
| Uplink Configuration | 4x 10G fixed uplinks |
| Default AC power supply | 1100W AC |
| Available PoE power | 880W |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
| IPv6 routing entries | 16,000 |
| Multicast routing scale | 8,000 |
| QoS scale entries | 5,120 |
| ACL scale entries | 5,120 |
| Packet buffer per SKU | 16 MB buffer for 24 and 48 port Gigabit Ethernet models |
| FNF entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models |
| DRAM | 8 GB |
| Flash Memory | 16 GB |
| VLAN IDs | 4094 |
| Total Switched Virtual Interfaces (SVIs) | 1000 |
| Jumbo frames | 9198 bytes |
| Total routed ports per Catalyst 9300 Series stack | 416 |
| Switching capacity | 272 Gbps |
| Switching capacity with stacking | 592 Gbps |
| Forwarding rate | 202.38 Mpps |
| Forwarding rate with stacking | 440.47 Mpps |
| Mean Time Between Failures–MTBF (hours) | 332,640 |
| Power connectors | •Customers can provide power to a switch by using the internal power at the back of the switch •Internal power supply connector The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet |
