+1 (281) 747-5957
Specification Of C9500-48Y4C
C9500-48Y4C Datasheet
| Device Type | Switch - 48 ports - L3 - Managed |
| Subtype | 25 Gigabit Ethernet |
| Ports | 48 x 25 Gigabit SFP28 |
| Performance | Switching capacity (full duplex): 3.2 Tbps Forwarding rate: 1 Bpps |
| Capacity | Routing table entries: 80000 Indirect IPv4 routes: 212000 Host IPv4 routes: 90000 Indirect IPv6 routes: 212000 Host IPv6 routes: 90000 Multicast scale: 32000 QoS ACL scale: 16000 Security ACL scale: 270000 FNF entries: 96000 VLAN IDs: 4000 Switched virtual interfaces (SVIs): 4000 |
| MAC Address Table Size | 64K entries |
| Jumbo Frame Support | 9198 bytes |
| Routing Protocol | OSPF, IS-IS, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF |
| Features | DHCP support, NAT support, PAT support, trunking, MPLS support, NSF, SSO, CBWFQ, WRED, STP support, VRRP support, ACL support, QoS, NSR, RSPAN, HSRP support, VRF, MLD, FNF, MSDP, MACsec support, CoPP, integrated Wireshark, VLAN Double Tagging (Q-in-Q), EoMPLS, H-VPLS, Private VLAN, L3VPN support, CoAP support, SPAN |
| Processor | 1: 2.4 GHz |
| RAM | 16 GB |
| Flash Memory | 16 GB |
| Built-in Devices | RFID tag |
| Interfaces | 48 x 25Gbit LAN SFP28 4 x 100Gbit LAN 2 x USB 3.0 |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 1 |
| Max Supported Qty | 2 |
| Power Redundancy | Optional |
| Power Redundancy Scheme | 1+1 |
| Power Provided | 650 Watt |
| Voltage Required | AC 120/230 V (50 - 60 Hz) |
| MTBF | 316,960 hours |
| Software Included | Cisco IOS XE 16.8.1 |
| Width | 44.5 cm |
| Depth | 45.7 cm |
| Height | 4.39 cm |
| Weight | 9.96 kg |
