Overview Of JL260A
The HPE JL260A switch is built to deliver exceptional performance with its advanced switching technology, ensuring seamless data flow and minimal latency. Designed to grow with your business, the JL260A supports easy scalability, allowing you to expand your network infrastructure as needed without compromising performance. Offering both local and remote management options, the JL260A ensures ease of use and flexibility. It supports web-based management, SNMP, and command-line interface (CLI) options. The switch supports a comprehensive set of Layer 2 features, including VLANs, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP), enhancing network performance and reliability.
Specification Of JL260A
JL260A Datasheet
Throughput | up to 77.4 Mp/s |
Routing/Switching capacity | 104 Gb/s |
I/O ports and slots | 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at ) Duplex: 10BASE-T/100BASETX: half or full 1000BASE-T: full only |
Memory and processor | Dual Core ARM Coretex A9 @ 1016 MHz, 1 GB DDR3 SDRAM Packet buffer size: 12.38 MB 4.5MB Ingress/7.785 Egress, 4 GB eMMC |
Additional ports and slots | 1 dual-personality (RJ-45 or USB micro-B) serial console port |
Management | Aruba AirWave Network Management; IMC – Intelligent Management Center Command-line interface Web browser Configuration menu SNMP manager Telnet RMON1 FTP Out-of-band management (serial RS-232C or micro USB) |
1000 Mb Latency | < 3.8 µs (FIFO 64-byte packets) |
10 Gbs Latency | Not Available |
Routing table size | 10000 entries (IPv4), 5000 entries (IPv6) |
MAC address table size | 32768 entries |
80plus.org Certification | Not Available |
Description | Not Available |
Maximum heat dissipation | 167.74 kJ/hr (159 BTU/hr) |
Voltage | 100 - 127 / 200 - 240 V ac, rated |
Current | 0.9/0.6 A |
Maximum power rating | 46.6 W |
Idle power | 32.7 W |
Frequency | 50/60 Hz |
PoE power | Not Available |