Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
SFP-10G-SR
Cisco 10GBASE-SR SFP+ Transceiver Module, 300m, MMF, LC, DOM...
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
SFP-10G-SR is a Cisco SFP+ optical transceiver module for 10 Gigabit Ethernet interfaces. The module uses multi-mode fiber as its optical media. Duplex LC/PC connectivity terminates the optical port. An 850 nm optical path carries transmit and receive traffic. Cisco specifies 300 m maximum operation. The product carries the Commercial operating temperature class. Digital Optical Monitoring reports optical output power, optical input power, temperature, laser bias current, and supply voltage. Hot-swappable installation places the input and output device into a powered host port. Cisco quality identification lets compatible Cisco platforms identify certified and tested modules. Optical interoperability aligns the link with 10GBASE XENPAK, X2, and XFP interfaces on the same path. The beige bail latch marks the SR family color code. The hardware follows Cisco's pay-as-you-populate transceiver model.
SFP-10G-SR uses the SR optical power row shared with the S-Class SR variant. TX power range delivers average optical output from -7.3 dBm to -1.2 dBm. RX sensitivity reaches -9.9 dBm at the receiver input. RX overload point sits at -1.0 dBm for the SR optical family. The optical table reports transmit and receive power as average values unless otherwise specified. Class 1 laser requirements constrain maximum launch power under IEC 60825-1 safety limits. With IEEE 802.3ae, minimum path length starts at 2 m for SR, LRM, LR, and ER modules. IEEE 802.3 covers 10-Gigabit Ethernet in the compliance table. SFP+ MSA SFF-8431 applies to optical modules, active optical cables, and passive Twinax cables. GR-20-CORE covers optical fiber and optical fiber cable requirements in the regulatory block. GR-1435-CORE applies to multifiber optical connector requirements in the same compliance section. At 1 W, maximum power consumption stays within the Cisco commercial SR power row.
Cisco lists Catalyst 2960-S, Catalyst 2960-X, and Catalyst 2960-XR among supported switch platforms. Catalyst 3560-X, Catalyst 3750-X, Catalyst 3850, Catalyst 4500, and Catalyst 4500-X also appear. Nexus 2000, Nexus 3000, Nexus 4000, Nexus 9000, and Nexus 9500 cover data centre switching roles. ASR 1000, ASR 9000, MDS 9000, and UCS switches extend platform coverage. ME 4500 and ME 4900NCS platforms add carrier Ethernet coverage. Data centre interconnect, enterprise wiring closet, service provider transport, aggregation, and edge designs use this module. OM3 is the required cable grade for the named distance in the product configuration. Buy SFP-10G-SR from ORM Systems in new and certified refurbished condition. Certified refurbished stock receives optical performance testing before dispatch. Request a quote from ORM Systems to check price, condition, availability, and order quantity. ORM Systems provides bulk quotation for qualified enterprise and volume buyers worldwide.
SFP-10G-SR price is $87.00, a 92.6% saving from the Cisco list price of $1,174.00. SFP-10G-SR is in stock and available for next-day dispatch. (terms applied)
Request bulk order quote for SFP-10G-SR for additional pricing. Browse the full 10G Base Modules series or explore all Cisco products.
SFP-10G-SR occupies the 10 Gigabit uplink between access switches and distribution switches where short reach multimode fiber is already installed. Engineers insert the SFP+ module into Cisco 10G ports, terminate duplex LC patch cords, and align the fiber plant to 850nm 10GBASE-SR optics over OM3 or OM4 cabling. DOM telemetry reports optical power and temperature to the host platform during operations. The result is a measured access to distribution handoff that preserves existing multimode pathways and stabilizes 10G uplink visibility.
Cisco SFP-10G-SR terminates server access links into top of rack switching when compute nodes, converged adapters, or intermediate patch panels present short reach multimode runs. Network teams populate SFP+ switch ports, map LC duplex fiber pairs, and maintain 10G Ethernet or FCoE adjacency where the Cisco platform supports that traffic. The 300m OM3 reach keeps row and rack designs within standard campus or data room distances. The result is a predictable server access path with optics monitoring and cleaner fault isolation.
SFP-10G-SR serves as a standardized spare for 10GBASE-SR links across Cisco switches, routers, UCS fabric switches, and MDS platforms that accept the module. Operations teams keep tested LC MMF optics with matching patch cords, then replace failed SR modules without changing fiber type, port speed, or link design. The beige latch and DOM support simplify field identification and post-replacement checks. The result is faster restoration of short reach 10G services with fewer platform-specific spare parts.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| SFP-10G-SR |  X2-10GB-LR |  SFP-10G-ZR |  SFP-H10GB-CU1-5M |  XFP10GER192IR-RGD | |
|---|---|---|---|---|---|
| Product Type | Optical Transceiver | Transceiver | Transceiver | Direct Attach Copper Cable Assembly | Transceiver |
| Form Factor | SFP+ | SFP+ | SFP+ | SFP | XFP |
| Data Rate | 10 Gbps | 10G | 10G | 10G | 10G |
| Connector Type | LC Duplex | LC | LC | SFP | LC |
| Operating Temperature | Commercial (0°C to 70°C) | 0 to 70°C | 0 to 70°C | 0 to 70°C | 0 to 70°C |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
10GBASE-SR SFP+ delivers stable short-range fiber connectivity with minimal errors.
Plug-and-play module with reliable 10G performance in data center setups.
Low latency and consistent throughput for MMF connections.
Professional-grade optics, easy integration into Cisco hardware.
Durable and dependable module for short-range 10G links.
Reliable short range 10G optics.
Clean signal and easy installation.
Consistent performance on multimode fiber.
No link issues.
Trusted Cisco SFP.
Cisco SFP-10G-SR is a 10GBASE-SR SFP+ optical transceiver for short reach 10 Gigabit Ethernet over multimode fiber. It uses 850nm optics, duplex LC connectors, and supports Digital Optical Monitoring. The module is commonly used in Cisco switches, routers, data center platforms, and aggregation links that need reliable 10G MMF connectivity.
SFP-10G-SR identifies a Cisco small form-factor pluggable plus module for 10 Gigabit Ethernet short reach optical links. SFP indicates the pluggable transceiver form factor, 10G identifies the data rate, and SR means short reach. In practice, the SKU points buyers to an 850nm MMF module for 10GBASE-SR connections.
SFP-10G-SR is an optical transceiver module, not a switch, router, cable, or standalone network device. It plugs into a compatible SFP+ port and converts the host port into a 10G optical interface over multimode fiber. The module requires suitable LC fiber patch leads and a Cisco platform that supports the SKU.
SFP-10G-SR sits in Cisco's 10GBASE SFP+ optical module family as the short reach multimode fiber option. It is positioned below longer reach single-mode models such as SFP-10G-LR and SFP-10G-ER, and beside related short reach variants such as SFP-10G-SR-S, SFP-10G-SR-X, and SFP-10G-SR-I.
SFP-10G-SR uses the SFP+ form factor for 10 Gigabit Ethernet interfaces. It is a hot-swappable input and output module that installs into a compatible Ethernet SFP+ port without powering down the host platform. The compact form factor helps network teams populate high-density switch and router line cards with 10G optical links.
SFP-10G-SR supports 10 Gigabit Ethernet operation for 10GBASE-SR optical links. It is intended for 10G SFP+ ports rather than 1G SFP-only interfaces. Buyers should confirm that the target Cisco switch, router, server fabric, or line card supports the SFP-10G-SR SKU and the required Cisco software release.
SFP-10G-SR uses 850nm short wavelength optics for 10GBASE-SR transmission over multimode fiber. Cisco lists the transmit and receive wavelength range for the SR family as 840 to 860nm. This wavelength is matched to MMF cabling and should not be selected for standard long reach single-mode fiber links.
SFP-10G-SR supports up to 300 meters over OM3 multimode fiber and up to 400 meters over OM4 or OM5 multimode fiber. It also supports shorter distances over older FDDI, OM1, and OM2 fiber grades. The actual design should match Cisco distance tables, installed fiber grade, connector quality, and optical loss budget.
SFP-10G-SR uses a dual LC/PC connector for duplex multimode fiber patching. Cisco notes that PC or UPC patch cords are supported, while APC patch cords are not supported for these modules. Buyers should order LC multimode fiber leads that match the fiber plant, port layout, and rack patching standard.
SFP-10G-SR is supported across many Cisco platforms, including Catalyst switches, Nexus switches, ASR routers, MDS 9000, UCS fabric switches, and selected service provider platforms. Compatibility is platform and software dependent, so buyers should validate the exact chassis, line card, transceiver support matrix, and operating system release before deployment.
SFP-10G-SR is used for short reach 10G optical links between switches, routers, servers, storage fabrics, and aggregation devices. It is especially useful where existing multimode fiber is already installed between racks, closets, or equipment rooms. The module gives Cisco SFP+ ports a standardized LC MMF interface for 10GBASE-SR connectivity.
SFP-10G-SR fits data centers, campus networks, wiring closets, labs, and enterprise racks with short reach multimode fiber. It is a strong fit for access to distribution uplinks, top of rack switch links, and short interconnects inside buildings. Longer campus backbones usually require single-mode alternatives such as SFP-10G-LR or SFP-10G-ER.
SFP-10G-SR is commonly selected for 10G Ethernet links, and the provided product name includes FCoE support. FCoE operation also depends on the Cisco platform, port mode, software feature set, and network design. Buyers should verify the host switch or fabric platform supports FCoE with this transceiver before using it in storage traffic paths.
SFP-10G-SR is practical for bulk 10G deployments where many Cisco SFP+ ports need short reach MMF optics. Standardizing on the same 850nm LC module simplifies spares, patching, testing, and procurement. Bulk buyers should match the order quantity to port counts, spare ratios, fiber grade, and any staged rollout schedule.
SFP-10G-SR is supported on many Cisco Catalyst platforms with compatible SFP+ ports, including Catalyst 2960-X, 3560-X, 3750-X, 3850, 4500-X, and related families listed by Cisco. Support still depends on the exact model, module bay, software version, and Cisco transceiver compatibility matrix for the target switch.
SFP-10G-SR is used across many Cisco Nexus environments, including Nexus 2000, 3000, 4000, 9000, and 9500 platforms where the relevant ports support the module. Nexus compatibility should be checked at the exact switch, line card, NX-OS release, and port type level before ordering for production data center links.
SFP-10G-SR appears in Cisco platform support lists that include MDS 9000 and Unified Computing System switches, subject to exact platform compatibility. These environments often use strict optics qualification, firmware, and port mode requirements. Buyers should verify the MDS or UCS model, supported transceiver table, and intended Ethernet or storage fabric role.
SFP-10G-SR is associated with 10GBASE-SR Ethernet over multimode fiber, 850nm optical transmission, duplex LC connectivity, and DOM reporting through industry-standard monitoring functions. The product name also references FCoE. Platform support, protocol use, and diagnostics depend on the Cisco host device and the software running on that platform.
SFP-10G-SR and SFP-10G-SR-S are both Cisco 10GBASE-SR SFP+ modules for 850nm multimode fiber, with similar short reach distance support. The key difference is that Cisco identifies SFP-10G-SR-S as an S-Class module, and Cisco notes that SFP-10G-SR-S does not support FCoE. SFP-10G-SR is the better match when FCoE support is required.
SFP-10G-SR is the commercial temperature 10GBASE-SR SFP+ option for MMF links, while SFP-10G-SR-X is an extended temperature variant. Both support short reach 850nm multimode fiber links, including 300 meters over OM3 and 400 meters over OM4. SFP-10G-SR-X is selected when the platform and environment require extended operating temperature support.
SFP-10G-SR is optimized for 850nm short reach multimode fiber, while SFP-10G-LRM uses 1310nm optics and supports longer legacy multimode links up to 220 meters, plus 300 meters on standard single-mode fiber. SFP-10G-LRM is often considered when older FDDI, OM1, or OM2 fiber must remain in service.
SFP-10G-SR is the multimode short reach option for building, closet, and rack links, while SFP-10G-LR is the single-mode long reach option for links up to 10 kilometers. SFP-10G-SR uses 850nm MMF optics and LC connectors. SFP-10G-LR uses single-mode fiber when distance requirements exceed SR limits.
SFP-10G-SR price depends on condition, quantity, market availability, and whether the buyer needs new, refurbished, or bulk procurement. ORM Systems lists enterprise hardware through quotation rather than a single fixed public price for every order. Buyers usually receive the most accurate SFP-10G-SR price after confirming quantity, delivery location, and required condition.
SFP-10G-SR is commonly sourced in new and refurbished condition through enterprise hardware resellers, subject to live stock and supplier availability. Refurbished units should be tested before dispatch because optical power, DOM reporting, latch condition, and connector condition matter in production links. ORM Systems can quote available condition options for the required quantity.
SFP-10G-SR has been widely deployed for many years, and lifecycle status should be checked against Cisco's current product notices for the exact SKU and region. Even where a Cisco module is mature, enterprise buyers often continue sourcing it for installed Catalyst, Nexus, MDS, UCS, and ASR environments that still require 10G SR optics.
SFP-10G-SR lead times depend on stock position, order size, condition, testing requirements, and destination. Small quantities may be easier to source quickly, while larger rollout quantities can require supplier coordination. ORM Systems can provide a lead time after checking availability for Cisco SFP-10G-SR, requested quantity, shipping address, and any staging requirement.
Bulk discounts are often available for SFP-10G-SR when buyers order multiple modules for switch refreshes, data center expansion, spares, or access uplink projects. Pricing usually improves when quantity, acceptable condition, delivery schedule, and substitute restrictions are clear. ORM Systems can quote volume pricing for standardized Cisco 10GBASE-SR SFP+ procurement.
ORM Systems can supply SFP-10G-SR with warranty options that depend on condition, availability, and order terms. Optical transceivers should be covered by clear testing and return conditions because link reliability depends on transmit power, receive sensitivity, DOM reporting, and physical connector condition. Buyers should confirm warranty duration and coverage when requesting the quote.
Refurbished SFP-10G-SR modules should be tested before dispatch for optical performance, DOM visibility, connector condition, latch integrity, and Cisco platform recognition. Testing helps reduce failed installs, intermittent links, and unsupported transceiver warnings. ORM Systems can supply tested refurbished Cisco optics when the buyer confirms the target platform and required deployment quantity.
SFP-10G-SR aligns with Cisco's 10GBASE-SR SFP+ module specifications and uses industry-standard DOM functions associated with SFF-8472 monitoring. Network teams should also consider the relevant Ethernet standard, supported fiber type, connector requirements, and Cisco compatibility matrix. Compliance validation should include the host platform, software release, and approved fiber patching standard.
SFP-10G-SR is installed by inserting the module into a compatible Cisco SFP+ port, connecting duplex LC multimode fiber, and checking the link state on the host platform. The installer should verify port speed, fiber polarity, supported platform status, and DOM readings. Cleaning the LC connectors before connection reduces optical loss and link instability.
SFP-10G-SR itself does not require a standalone licence, but the host platform must support the port, speed, transceiver, and intended feature set. Some Cisco switches or routers require the correct software image, port configuration, or feature licensing for 10G interfaces, FCoE, or advanced network services. Platform validation remains part of deployment planning.
SFP-10G-SR requires a compatible Cisco SFP+ port, duplex LC multimode fiber patch cords, appropriate OM3 or OM4 fiber for longer SR distances, and clean connector handling. A fiber inspection and cleaning kit is useful during installation. Network teams should also confirm optical loss budget, patch panel labeling, and port compatibility before commissioning the link.
Buyers can purchase Cisco SFP-10G-SR in the UK through ORM Systems by requesting a quote for the required quantity, condition, and delivery schedule. ORM Systems focuses on enterprise IT hardware sourcing, including Cisco optics for installed networks. Accurate quoting usually requires the target platform, preferred condition, quantity, and any project deadline.
ORM Systems can support international enquiries for SFP-10G-SR, subject to availability, export requirements, destination, and shipping terms. International buyers should provide delivery country, quantity, condition preference, and any documentation requirements when requesting a quote. This helps confirm whether Cisco SFP-10G-SR can be sourced, tested, packed, and shipped for the project timeline.
United States
