Overview
The Cisco WS-X6908-10G-2TXL is a high-performance switch module designed to enhance network capabilities within Cisco Catalyst 6500 series switches. With its advanced technology and powerful features, this module provides exceptional throughput and reliability for demanding networking environments. Equipped with eight 10-Gigabit Ethernet ports, the WS-X6908-10G-2TXL offers high-speed connectivity for data-intensive applications, facilitating seamless data transmission and efficient network operation. With built-in redundancy features such as hot-swappable components and support for the Cisco Virtual Switching System (VSS), the module enhances network resilience and minimizes downtime, providing uninterrupted connectivity for critical business operations. The WS-X6908-10G-2TXL is managed through Cisco IOS Software, offering a rich set of management features for configuration, monitoring, and troubleshooting. Administrators can easily optimize network performance and address issues promptly to maintain smooth operation. Designed with energy efficiency in mind, this module incorporates features such as Energy Efficient Ethernet (EEE) and Cisco EnergyWise technology, helping organizations reduce power consumption and lower operating costs while minimizing their environmental footprint.
Specification
Specifications | |
---|---|
Standard protocols | IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3aq, and IEEE 802.3an |
Physical specifications | Occupies one slot in the Cisco Catalyst 6500 Series chassis
Dimensions (H x W x D): 1.73 x 14.4 x 16 in. (4.0 x 36.6 x 40.6 cm) Weight: Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2 |
Environmental conditions | Operating temperature:
Agency-certified for operation: 32 to 104°F (0 to 40°C) Design and tested for operation 32 to 130°F (0 to 55°C) Storage temperature: –40 to 167°F (–40 to 75°C) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: Agency-certified for operation: –500 to 6500 ft (–150 to 2000m) Designed and tested for operation –500 to 10000 ft (–150 to 3000m) |
Regulatory compliance | Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:
EMC Standards: FCC Part 15 (CFR 47) Class A ICES-003 Class A VCCI Class A EN55022 Class A EN55024 CISPR24 CISPR 22 Class A AS/NZS CISPR 22 Class A ETS 300 386 KN 22 Class A EN 50082-1 EN61000-3-2 EN61000-3-3 EN61000-6-1 CNS13438 Class A KN6100 -4 Series Safety Standards: UL 60950-1 CAN/CSA C22.2 No. 60950 EN 60950-1 IEC 60950-1 AS/NZS 60950-1 IEC 60825 Class 1 EN 60825 Class 1 21CFR 1040 |
NEBS criteria levels | SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) |
ETSI | ETS 300 019-2-1, Class 1.1 Storage
ETS 300 019-2-2, Class 2.1 and 2.2 Transportation ETS 300 019-2-3, Class 3.1E Stationary Use |
Network management | ETHERLIKE-MIB (RFC 1643)
IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIB CISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-EXTENSIONS-MIB CISCO-VLAN-BRIDGE-MIB CISCO-VLAN-MEMBERSHIP-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIB |
Power requirements | WS-X6716-10T-3C: 509.3W (12.1A @ 42V)
WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V) WS-X6716-10G-3C: 457.8W (10.9A @ 42V) WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V) WS-X6708-10G-3C: 444.36W (10.58A @ 42v) WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V) WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V) WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V) WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V) WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V) WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V) WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) |
Indicators | Status: green (operational), red (faulty), and orange (module booting) Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected) |