Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
C9200CX-8P-2X2G-A
Cisco Catalyst 9200CX Compact Switch, 8x 1G PoE+, 2x 10G SFP...
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9200CX-8P-2X2G-A is a fanless Cisco Catalyst 9200CX managed Layer 3 compact switch for access sites that need PoE+ in a small enclosure. It provides 8 x 1GbE PoE+ downlink ports, 2 x 10GbE SFP+ fixed uplinks, and 2 x 1GbE copper fixed uplinks, so fiber and copper handoffs remain available without a modular bay. The SFP+ uplinks and copper uplinks operate simultaneously, which keeps local copper handoff separate from fiber aggregation. The switch runs the Network Advantage software image and uses an internal 315W AC power supply with a 240W shared PoE budget. Its compact 1U-height chassis supports desktop, DIN rail, and 19-inch rack mounting through compact-switch accessories. The platform belongs to Cisco Catalyst 9200CX. C9200CX-12P-2X2G-A is the closest higher-density sibling, differing by 12 x 1GbE PoE+ downlink ports instead of 8.
60 Gbps switching capacity carries compact access traffic from powered copper endpoints toward fixed copper or SFP+ uplinks. 44.64 Mpps forwarding rate supports line-rate switching behavior for the documented port mix under 64-byte packet testing. 240W PoE budget is shared across the eight PoE+ access ports, aligning endpoint power allocation with the 315W internal AC supply. OSPF, EIGRP, IS-IS, RIP, and routed access support place Layer 3 segmentation and routing policy directly at the access edge. C9200CX-8P-2X2G-A includes 4 GB DRAM, 8 GB flash, 6 MB packet buffer capacity, and 32,000 MAC address scale for the C9200CX platform. The control plane also supports 4,094 VLAN IDs, 512 switched virtual interfaces, 16,000 Flexible NetFlow entries, and 9,198-byte jumbo frames for campus access segmentation. USB Type-A storage, USB micro-Type B console access, SD card support, SNMP, NETCONF, RESTCONF, and YANG-based automation give operations teams familiar Cisco IOS XE management paths without changing uplink hardware.
C9200CX-8P-2X2G-A sits at the enterprise access tier in branch and distributed campus designs, connecting phones, wireless access points, cameras, printers, and other standards-based PoE endpoints near the users or systems they serve. The compact platform operates as a standalone switch because C9200CX models are not StackWise stackable, and the 1U rack profile also fits desktop and DIN rail mounting plans where a full-width closet switch is unsuitable. ORM Systems supplies this model new and certified refurbished for access-layer expansion, replacement, and sparing requirements. Refurbished units are checked for IOS XE boot, PoE delivery on all access ports, and SFP+ uplink recognition before dispatch. Request a quote to align condition, optics, power cords, warranty, delivery timing, and documented project timelines. Enterprise and volume buyers receive sourcing support for multi-site access rollouts, spares, and matched-batch compact switch requirements across refresh schedules.
C9200CX-8P-2X2G-A price is $2,308.00. C9200CX-8P-2X2G-A is in stock and available for next-day dispatch. (terms applied)
Request bulk order quote for C9200CX-8P-2X2G-A for additional pricing. Browse the full Catalyst 9200-Cx Switches series or explore all Cisco products.
C9200CX-8P-2X2G-A sits at a compact access edge and terminates eight local 1G PoE+ endpoint runs from phones, cameras, access points, or control devices. Engineers assign VLANs, 802.1X policy, QoS markings, and PoE budgets directly at the endpoint handoff, then carry traffic upstream through the fixed 10G SFP+ or 1G copper uplinks. The fanless chassis fits locations where a full-depth access switch does not fit. The network gains Catalyst policy control at small endpoint clusters without extending copper back to a distant closet.
The switch operates below the distribution layer and presents compact access traffic through two 10G SFP+ fixed uplinks or two 1G copper uplinks. Network teams connect the SFP+ ports to fiber aggregation switches, reserve copper uplinks for local handoff or fallback paths, and configure trunks, routed links, or EtherChannel according to the upstream design. C9200CX-8P-2X2G-A keeps the eight PoE+ access ports separate from uplink selection. The result is a defined access-to-distribution boundary with predictable uplink capacity and simpler cabling decisions.
C9200CX-8P-2X2G-A operates as a routed access node for a small endpoint zone that needs local VLAN boundaries and upstream route control. Engineers place SVIs, ACLs, QoS policy, and routing adjacencies on the Network Advantage image, then use the 10G SFP+ uplinks to carry summarized or routed traffic toward distribution. The 240W PoE budget powers the local endpoint set while segmentation remains close to the ports. The network gains tighter fault domains and clearer policy enforcement at the compact access layer.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| C9200CX-8P-2X2G-A |  C9200CX-12T-2X2G-A |  C9200CX-8UXG-2X-A | |
|---|---|---|---|
| Depth | 244 mm | 165 mm | 244 mm |
| Ethernet Technology | Gigabit Ethernet | Gigabit Ethernet | Multi-Gigabit (2.5G/5G) / 10 Gigabit Ethernet |
| Form Factor | Desktop / Rack-Mount 1U / DIN Rail Mount | Desktop | Rack-Mount 1U |
| Height | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | C9200CX-8P-2X2G-A | C9200CX-12T-2X2G-A | C9200CX-8UXG-2X-A |
| Media Type Supported | Twisted Pair / Fiber | Twisted Pair / Fiber | Twisted Pair / Fiber |
| Memory | 4 GB DRAM / 8 GB Flash | 4 GB DRAM / 8 GB Flash | 4 GB DRAM / 8 GB Flash |
| Power Consumption | 280.2W | 25.9W | 301.9W |
| Power Source | AC | PoE / AC / DC | AC |
| Product Type | Network Switch | Network Switch | Network Switch |
| Switching Capacity | 60 Gbps | 70 Gbps | 128 Gbps |
| Weight | 2.99 kg | 1.81 kg | 3.18 kg |
| Width | 269 mm | 269 mm | 269 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
C9200CX-8P-2X2G-A is a Cisco Catalyst 9200CX compact managed access switch with 8x 1G PoE+ downlink ports, 2x 10G SFP+ fixed uplinks, 2x 1G copper uplinks, and Network Advantage licensing. It is designed for compact access locations that need powered endpoint connectivity, routed access features, and fanless operation in a small physical footprint.
The model number identifies a Catalyst 9200CX compact switch with 8 PoE+ access ports and a 2X2G uplink layout. The 2X2G portion refers to 2x 10G SFP+ fixed uplinks and 2x 1G copper uplinks. The -A suffix indicates Network Advantage, while the C9200CX prefix places it in Cisco's compact Catalyst 9200CX access switch family.
C9200CX-8P-2X2G-A is a Layer 2 and Layer 3 Ethernet access switch, not a router, firewall, access point, or transceiver. It provides fixed copper PoE+ access ports for endpoints and fixed uplink ports for aggregation. The compact fanless chassis suits small wiring areas, distributed edge locations, and places where a full-depth rack switch is not practical.
C9200CX-8P-2X2G-A sits in the Cisco Catalyst 9200CX compact switch lineup, which extends Catalyst 9000 access switching into smaller fanless models. It is smaller than standard Catalyst 9200 and 9200L access switches, while retaining IOS XE operation, PoE+ endpoint support, SFP+ uplinks, and the Network Advantage software tier for routed access and segmentation designs.
C9200CX-8P-2X2G-A has 8x 1G RJ-45 PoE+ downlink ports, 2x 10G SFP+ fixed uplink ports, and 2x 1G copper fixed uplink ports. This mix gives the switch local powered endpoint access plus both fiber and copper uplink choices. The model is fixed configuration, so the uplink ports are not selected through a modular network module.
C9200CX-8P-2X2G-A provides 60 Gbps switching capacity and a 44.64 Mpps forwarding rate based on Cisco's Catalyst 9200 Series bandwidth specifications. Those figures align with the 8x 1G PoE+ access ports and fixed uplink layout. For buyers, the key point is that the compact model is sized for access edge traffic, not high-density campus aggregation.
C9200CX-8P-2X2G-A supports PoE+ on all 8 downlink ports, with up to 30W per port under IEEE 802.3at and a 240W available PoE budget. The switch uses a 315W internal AC power supply. This makes it suitable for powered endpoint groups such as IP phones, wireless access points, cameras, badge readers, and other standards-based PoE devices.
C9200CX-8P-2X2G-A supports Catalyst access switching functions such as VLANs, 802.1Q trunks, STP, EtherChannel, ACLs, QoS, and routed access features through IOS XE. The Network Advantage tier is the higher network license option for this model. It fits deployments that need local segmentation, SVIs, dynamic routing support, and policy enforcement at the compact access edge.
C9200CX-8P-2X2G-A runs Cisco IOS XE and supports standard Catalyst management methods, including CLI, SNMP, syslog, NETCONF, RESTCONF, and YANG-based automation. Cisco Plug and Play is also part of the Catalyst 9200 software capabilities. Network teams commonly integrate this switch into Catalyst Center, monitoring platforms, configuration management tools, and existing IOS XE operational workflows.
C9200CX-8P-2X2G-A does not support physical StackWise stacking. Cisco lists stacking bandwidth as not applicable for C9200CX models and specifically excludes C9200CX-8P-2X2G from switch stack support. Buyers that require hardware stacking should evaluate standard Catalyst 9200 or Catalyst 9200L models instead, while this compact model is better treated as a standalone access switch.
C9200CX-8P-2X2G-A is used for compact access-layer switching where a small group of powered Ethernet endpoints needs Catalyst policy, uplink resilience, and IOS XE management. It is well suited to distributed access points, compact wiring locations, desk-side network zones, wall-mounted cabinets, and small edge areas that need PoE+ without deploying a larger 24-port or 48-port switch.
C9200CX-8P-2X2G-A fits small access zones rather than dense wiring closets. The 8x 1G PoE+ ports support a focused endpoint group, while the 2x 10G SFP+ and 2x 1G copper uplinks give flexible handoff to upstream switching. Larger endpoint counts usually justify adjacent 12-port Catalyst 9200CX models or standard 24-port and 48-port Catalyst 9200 switches.
C9200CX-8P-2X2G-A suits access workloads such as VoIP phones, Wi-Fi access points, surveillance endpoints, building systems, printers, and small workstation groups. The switch provides PoE+ power, VLAN segmentation, QoS policy, and 10G fiber uplinks for upstream traffic. It is not positioned as a server aggregation switch or a high-port-density campus core device.
C9200CX-8P-2X2G-A works well in branch and distributed edge designs where network teams place a compact access switch close to endpoints. Its fanless design and 1.73 x 10.6 x 9.6 inch chassis suit constrained spaces. The fixed 10G SFP+ uplinks connect back toward aggregation, while Network Advantage supports routed access and segmentation policies at the local edge.
C9200CX-8P-2X2G-A integrates with Cisco Catalyst Center, Cisco IOS XE operations, Cisco Identity Services Engine for policy workflows, and standard SNMP-based network monitoring. It also fits Catalyst access designs that use VLANs, 802.1X, MACsec, ACLs, QoS, and routed access. The switch should be planned alongside compatible Catalyst distribution or aggregation switches.
C9200CX-8P-2X2G-A uses 10G SFP+ uplink slots and 1G copper RJ-45 uplinks. Cisco lists 10GBASE-SR, LR, LRM, ER, ZR, DWDM SFP+ transceiver families and 1000BASE-T copper cabling among Catalyst 9200 connector options. Buyers should verify the exact optic against Cisco's transceiver compatibility matrix and match fiber type, reach, and connector requirements.
C9200CX-8P-2X2G-A supports common Ethernet access standards including IEEE 802.3ab Gigabit Ethernet, IEEE 802.3at PoE+, IEEE 802.1Q VLAN tagging, IEEE 802.1X authentication, and IEEE 802.3ad link aggregation. This makes the switch appropriate for standards-based PoE endpoints, Cisco IP phones, Cisco wireless access points, and other devices that operate within the 30W PoE+ per-port envelope.
C9200CX-8P-2X2G-A connects upstream to Catalyst distribution or aggregation switches through 2x 10G SFP+ uplinks or 2x 1G copper uplinks. Common upstream choices include Catalyst 9200, Catalyst 9300, Catalyst 9500, and other enterprise switches that support matching Ethernet speeds, VLAN trunks, routed links, EtherChannel, and compatible Cisco optics or copper cabling.
C9200CX-8P-2X2G-A and C9200CX-8P-2X2G-E share the same compact hardware layout: 8x 1G PoE+ ports, 2x 10G SFP+ uplinks, and 2x 1G copper uplinks. The key difference is the software tier. The -A SKU includes Network Advantage, while the -E SKU includes Network Essentials. Buyers choose -A when the design needs the higher network license tier.
C9200CX-8P-2X2G-A provides 8x 1G PoE+ ports, while C9200CX-12P-2X2G-A provides 12x 1G PoE+ ports. Both use 2x 10G SFP+ and 2x 1G copper fixed uplinks, Network Advantage, a 315W internal AC power supply, and fanless operation. The 12-port SKU fits denser endpoint groups, while the 8-port SKU fits smaller compact access zones.
C9200CX-8P-2X2G-A and C9200CX-8P-2XGH-A both provide 8x 1G PoE+ ports, 2x 10G SFP+ uplinks, 2x 1G copper uplinks, Network Advantage, and fanless compact operation. The main distinction is the power input design. C9200CX-8P-2X2G-A uses the 315W internal AC version, while C9200CX-8P-2XGH-A is the HVDC or AC variant.
C9200CX-8P-2X2G-A is the better fit when the access edge needs 8x 1G PoE+ ports and separate 1G copper uplinks. C9200CX-8UXG-2X-A targets higher powered and faster endpoint connections with 4x multigigabit UPOE ports, 4x 1G UPOE ports, and 2x 10G SFP+ uplinks. Buyers choose based on endpoint speed and power requirements.
C9200CX-8P-2X2G-A pricing depends on condition, available stock, license requirements, optics, service coverage, and order volume. ORM Systems can quote new and refurbished options when available, including bulk pricing for multiple units. Buyers should request a current quote because Cisco Catalyst switch pricing changes with supply, configuration, warranty term, and procurement timing.
C9200CX-8P-2X2G-A is commonly sourced through enterprise channels in new, unused surplus, and refurbished conditions, subject to live availability. ORM Systems can provide condition-specific quotes and identify whether the unit is factory sealed, open box, or refurbished. Buyers should confirm condition at quotation stage because availability differs by batch and procurement lead time.
C9200CX-8P-2X2G-A does not have a product-specific Cisco hardware end-of-sale notice identified in the current Catalyst 9200 Series support listing. Cisco software releases for IOS XE have separate lifecycle notices, so hardware status and software train status should be checked separately. ORM Systems can help buyers verify lifecycle position before purchase or refresh planning.
C9200CX-8P-2X2G-A lead time depends on live stock, requested condition, order quantity, optics, power cords, and destination. Refurbished or surplus units may ship faster when already tested and allocated, while new channel sourcing can require additional procurement time. ORM Systems should confirm the current lead time on the formal quote before the buyer commits to a rollout date.
Bulk discounts for C9200CX-8P-2X2G-A are typically available when multiple units are requested, especially when the order allows matched condition, common accessories, and consolidated shipping. ORM Systems can price volume requirements for rollouts, sparing pools, or staged refresh projects. Buyers should provide target quantity, preferred condition, destination, and any optic requirements for an accurate volume quote.
C9200CX-8P-2X2G-A can be supplied by ORM Systems with warranty options that depend on condition, availability, and quotation terms. Refurbished networking hardware is typically sold with testing and reseller warranty coverage, while new units may also involve Cisco service options where applicable. Buyers should review the quoted warranty term, replacement process, and support scope before ordering.
Refurbished C9200CX-8P-2X2G-A units should be tested for boot status, IOS XE loading, port link operation, PoE output, uplink recognition, hardware inventory, serial validation, and cosmetic condition before dispatch. For this SKU, testing should specifically include all 8x 1G PoE+ downlinks plus the 10G SFP+ and 1G copper uplink interfaces.
C9200CX-8P-2X2G-A aligns with Catalyst 9200 Series Ethernet and management standards such as IEEE 802.3, 802.3ab, 802.3at PoE+, 802.1Q VLAN, 802.1X, 802.3ad link aggregation, SNMP, and RMON. Cisco also publishes regulatory compliance documentation for Catalyst 9200 Series switches. Buyers should match regional compliance, power cord, and safety documentation to the destination country.
First-use configuration for C9200CX-8P-2X2G-A normally requires AC power, a console connection through the supported management console interface, IOS XE access credentials, management IP settings, VLAN definitions, uplink configuration, PoE policies, and any required security templates. Network teams should also confirm software version, license state, optics compatibility, and configuration backup procedures before production handover.
C9200CX-8P-2X2G-A includes the Network Advantage network license tier in the hardware SKU, but Cisco Catalyst deployments often also involve Cisco DNA or Cisco Catalyst subscription licensing for automation, assurance, and software entitlement workflows. Buyers should validate the required term license, support contract, and management platform needs against the intended IOS XE and Catalyst Center design.
C9200CX-8P-2X2G-A planning should include the correct AC power cord, rack or wall mounting approach, compatible 10G SFP+ optics or DACs, fiber patch leads, copper patch leads, console access, and upstream switch ports. The switch does not use a StackWise kit. Buyers should also confirm PoE budget, endpoint power draw, VLAN plan, and uplink redundancy design.
C9200CX-8P-2X2G-A can be purchased in the UK through ORM Systems, subject to current availability and condition. ORM Systems supplies enterprise networking hardware to business buyers and can quote the switch with relevant accessories such as optics, power cords, and support options. UK buyers should request a formal quote with quantity, delivery location, preferred condition, and required lead time.
ORM Systems can support international enquiries for C9200CX-8P-2X2G-A, with shipping options dependent on destination, export requirements, unit condition, order size, and courier availability. International buyers should confirm the destination country, billing details, required incoterms, power cord preference, and any customs documentation needs when requesting pricing. Final shipping cost and lead time should be confirmed on the quote.
United States
