Name: HPE FlexNetwork 10512 3.44Tbps Type D Fabric Module (JC750A)
Brand: Hpe
SKU: JC750A
Availability: OutOfStock
Rating: 4.2 (5 reviews)

Question 1

What is the HPE FlexNetwork 10512 3.44Tbps Type D Fabric Module (JC750A)?

Accepted Answer

The JC750A is a high-performance Type D fabric module delivering up to 3.44 Tbps switching capacity for the HPE FlexNetwork 10512 chassis.

Question 2

What are the key performance specifications of the JC750A?

Accepted Answer

It provides up to 3.44 Tbps switching capacity, 1.44 Bpps forwarding rate, sub-3 µs latency, and a full non-blocking architecture.

Question 3

How many JC750A modules can be installed in an HPE FlexNetwork 10512 chassis?

Accepted Answer

The 10512 chassis supports up to six JC750A fabric modules, delivering a total switching capacity of 20.64 Tbps.

Question 4

Is the JC750A compatible with other HPE chassis?

Accepted Answer

No. The JC750A fabric module is exclusively compatible with the HPE FlexNetwork 10512 switch chassis.

Question 5

What is the typical power consumption of the JC750A?

Accepted Answer

The JC750A consumes approximately 150 W under full load and supports front-to-back airflow for optimized cooling.

Question 6

What is the operating environment for the JC750A?

Accepted Answer

It operates in 0 °C to 45 °C ambient, supports up to 95 % relative humidity, and is designed for data center deployments.

Question 7

Can the JC750A fabric module be hot-swapped?

Accepted Answer

Yes. The JC750A supports hot-swap installation, allowing you to add or replace modules without powering down the chassis.

Question 8

How do I install the JC750A in the 10512 chassis?

Accepted Answer

Slide the JC750A into an available fabric bay, secure it with captive screws, and follow the HPE FlexNetwork 10512 Installation Guide.

Question 9

Does the JC750A require a separate software license?

Accepted Answer

No. The JC750A fabric module is fully functional upon installation and does not require additional software licensing.

Question 10

Which network management tools support the JC750A?

Accepted Answer

The JC750A is managed via HPE Intelligent Management Center (IMC), Comware CLI, SNMP, and RESTful APIs for seamless integration.

Question 11

What virtualization features are supported with the JC750A?

Accepted Answer

When paired with Comware-based line cards, the JC750A enables VXLAN, EVPN, VRF, and advanced network virtualization features.

Question 12

How does the Type D fabric module differ from Type C?

Accepted Answer

Type D (JC750A) offers 3.44 Tbps capacity and higher throughput per slot, while Type C provides 1.44 Tbps, making Type D ideal for larger deployments.

Question 13

What are the typical use cases for the JC750A fabric module?

Accepted Answer

It's ideal for data center spine/leaf architectures, high-performance computing clusters, and large-scale campus core deployments.

Question 14

What warranty coverage does the JC750A include?

Accepted Answer

HPE provides a one-year limited warranty with parts replacement service; optional HPE Pointnext Care Pack services are available.

Question 15

Where can I purchase the HPE JC750A fabric module?

Accepted Answer

The JC750A is available through HPE authorized resellers, system integrators, and the HPE online store.

Question 16

What maximum throughput can be achieved with a fully populated chassis?

Accepted Answer

With six JC750A modules, the HPE FlexNetwork 10512 chassis delivers up to 20.64 Tbps of non-blocking throughput.

	JC750A	JC748A	JC753A	JC611A	JC613A
Depth	16.5 inches	14 inches	12 inches	12 inches	11 inches
Ethernet Technology	10/100/1000	10/100/1000	10/100/1000	10/100/1000	10/100/1000
Flash Memory	64 MB	64 MB	64 MB	64 MB	256 MB
Form Factor	Rack-mount	Rack-mount	Rack-mount	Rack-mount	Rack-mount
Height	1.75 inches	1.75 inches	1.75 inches	1 inch	1.75 inches
IOS	IP Services	IP Services	IP Services	IP Services	IP Services
Interface Ports	10/100/1000	10/100/1000	10/100/1000	10/100/1000	10/100/1000
Layer Supported	Layer 2 / Layer 3	Layer 3	Layer 3	Layer 2/3	Layer 2 / Layer 3
Manageable	Managed	Managed	Managed	Managed	Managed
Manufacturer Part Number	JC750A	JC748A	JC753A	JC611A	JC613A
Media Type Supported	Combo	Combo	Combo	Twisted Pair / Fiber	Twisted Pair / Fiber
Memory	256 MB	256 MB	256 MB	256 MB	512 MB
Number of Downlink Ports	24 Ports	24 Ports	24 Ports	24 Ports	24 Ports
Number of Ethernet Ports	24–48 Ports	24–48 Ports	24–48 Ports	24–48 Ports	24–48 Ports
POE Support	POE+	POE+	POE+	POE+	POE+
Port/Expansion Slot Details	2 expansion slots for additional modules	24 fixed Ethernet ports with 4 SFP slots	4 expansion slots	24 Ethernet ports and 4 SFP uplink ports	2 modular expansion slots supporting optional network modules
Power Consumption	85 W	50 W	75 W	130 W	150W
Power Source	Redundant Power Supply / AC Power Supply	AC Power Supply	AC Power Supply	AC Power Supply	Redundant Power Supply / AC Power Supply
Product Name	JC750A High-Performance Managed Layer 3 Switch	JC748A Enterprise Ethernet Switch	JC753A Series Network Switch	JC611A High-Performance Network Switch	JC613A Enterprise Gigabit Switch
Product Type	Managed Layer 3 Switch	Switch	Switch	Switch	Switch
Rack Units	1 RU	1 RU	1 RU	1 RU	1 RU
Redundant Power Supply Supported	Yes	Yes	Yes	Yes	Yes
SFP Ports	4 SFP Ports	4 SFP Ports	4 SFP Ports	4 SFP Ports	4 SFP Ports
Switching Capacity	128 Gbps	128 Gbps	160 Gbps	120 Gbps	320 Gbps
Switching Capacity with Stacking	256 Gbps	256 Gbps	320 Gbps	240 Gbps	640 Gbps
Uplink Configuration	1G / 10G	10G	10G	10G	10G
Weight	15 lbs	15 lbs	15 lbs	15 lbs	15 lbs
Width	17.5 inches	17.5 inches	17.5 inches	17 inches	17.5 inches

JC750A

$5,000,000+

Officially Accredited

Next-Gen IT

JC750A Overview

JC750A Specifications

Quality Certifications

Product Comparison Table

Reviews & Ratings

Questions & Answers

What is the HPE FlexNetwork 10512 3.44Tbps Type D Fabric Module (JC750A)?

What are the key performance specifications of the JC750A?

How many JC750A modules can be installed in an HPE FlexNetwork 10512 chassis?

Is the JC750A compatible with other HPE chassis?

Related Searches