+1 (281) 747-5957
Overview Of WS-C2960+24LC-L
The Cisco Catalyst 2960 series WS-C2960+24LC-L switches are efficient and reliable network switches designed to meet the demands of modern businesses. These switches offer a range of features to enhance network performance and simplify management. The Cisco Catalyst 2960 series WS-C2960+24LC-L switches come with 24 Ethernet ports, providing ample connectivity for your devices, such as computers, printers, and IP phones. It also has the option to select models in the series that support PoE to power compatible devices like IP cameras and phones directly through the network cable, eliminating the need for additional power sources. These switches run on Cisco's reliable and secure IOS software, providing a familiar interface for network administrators and ensuring compatibility with other Cisco devices.
Specification Of WS-C2960+24LC-L
WS-C2960+24LC-L Datasheet
| 10/100 Ethernet Interfaces | 24 |
| Cisco IOS Software Feature Set | LAN Base |
| Uplink Interfaces | 2 (SFP or 1000BASE-T) |
| Available PoE Power | 123W (8 ports up to 15.4W) |
| Flash Memory | 64 MB |
| DRAM | 128 MB |
| Forwarding bandwidth | 16 Gbps |
| Maximum active VLANs | 255 |
| VLAN IDs available | 4K |
| Maximum transmission unit (MTU) - L3 packet | 9000 bytes |
| Jumbo frame - Ethernet frame | 9018 bytes |
| Forwarding Rate 64-Byte L3 Packets,Millions of packets per second | 6.5 |
| Ethernet Interfaces | 10BASE-T ports RJ-45 connectors,2-pair Category 3,4,or 5 unshielded twisted-pair (UTP) cabling100BASE-TX ports RJ-45 connectors,2-pair Category 5 UTP cabling1000BASE-T ports RJ-45 connectors,4-pair Category 5 UTP cabling1000BASE-T SFP-based ports RJ-45 connectors,4-pair Category 5 UTP cabling |
| Indicator LEDs | Per-port status Link integrity,disabled,activity,speed,and full duplexSystem status,Port Status,RPS,link duplex,and link speed |
| Console | Cisco Catalyst console cables
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 |
| Power | The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.Use the supplied AC power cord to connect the AC power connector to an AC power outlet.The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle. |
| Voltage (Autoranging) | 100 to 240 VAC |
| Current (Amperes) | 1.4 – 0.8 |
| Frequency | 50 to 60Hz |
| Power Rating (kVA) | 0.16 |
| DC Input Voltages (RPS Input) | 2A at 12V |
| Power Consumption | 0% traffic 25.9
10% traffic 25.7 100% traffic 26.1 ATIS weighted average 25.8 |
