+1 (281) 747-5957
Overview Of WS-C2960+48TC-L
The Cisco Catalyst 2960 series WS-C2960+48TC-L switches are reliable and powerful network devices designed to meet the demands of modern businesses. Packed with features, these switches provide a seamless and efficient network experience. These switches have 48 ports, which offer strong connections to various devices such as computers, printers, and other networked devices. The Cisco Catalyst 2960 series WS-C2960+48TC-L switches support Power over Ethernet, enabling the delivery of both data and electrical power to compatible devices like IP cameras and VoIP phones through a single Ethernet cable. They also offer Plus 48 10/100 + 2 T/SFP LAN Base. Furthermore, with support for advanced security protocols, you can have peace of mind knowing that your data is protected against unauthorized access and potential threats.
Specification Of WS-C2960+48TC-L
WS-C2960+48TC-L Datasheet
| 10/100 Ethernet Interfaces | 48 |
| Cisco IOS Software Feature Set | LAN Base |
| Uplink Interfaces | 2 (SFP or 1000BASE-T) |
| Available PoE Power | None |
| Flash Memory | 64 MB |
| DRAM | 128 MB |
| Forwarding bandwidth | 16 Gbps |
| Maximum active VLANs | 255 |
| VLAN IDs available | 4K |
| Maximum transmission unit (MTU) - L3 packet | 9000 bytes |
| Jumbo frame - Ethernet frame | 9018 bytes |
| Forwarding Rate 64-Byte L3 Packets,Millions of packets per second | 10.1 |
| Dimensions (H x W x D) | 1.73 x 17.70 x 9.52 in (4.4 x 45.0 x 24.2 cm) |
| Weight (Approximate) | 8 lb (3.6 Kg) |
| Package Weight | 17.04 lb (7.73 Kg) |
| Ethernet Interfaces | 10BASE-T ports RJ-45 connectors,2-pair Category 3,4,or 5 unshielded twisted-pair (UTP) cabling100BASE-TX ports RJ-45 connectors,2-pair Category 5 UTP cabling1000BASE-T ports RJ-45 connectors,4-pair Category 5 UTP cabling1000BASE-T SFP-based ports RJ-45 connectors,4-pair Category 5 UTP cabling |
| Indicator LEDs | Per-port status Link integrity,disabled,activity,speed,and full duplexSystem status,Port Status,RPS,link duplex,and link speed |
| Console | Cisco Catalyst console cables
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 |
| Power | The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.Use the supplied AC power cord to connect the AC power connector to an AC power outlet.The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle. |
| Voltage (Autoranging) | 100 to 240 VAC |
| Current (Amperes) | 4.0 – 2.0 |
| Frequency | 50 to 60Hz |
| Power Rating (kVA) | 0.43 |
| DC Input Voltages (RPS Input) | 2A at 12V |
| Power Consumption | 0% traffic 35.4
10% traffic 35.3 100% traffic 35.6 ATIS weighted average 35.3 |
