Is SRX-SFP-10GE-DAC-1M compatible with Juniper SRX devices?

Yes, it is fully compatible with Juniper SRX-series firewalls and any network device supporting SFP+ MSA specifications.

Can I use this cable with Cisco switches?

Yes, the SRX-SFP-10GE-DAC-1M is Cisco-compatible and interoperable with all MSA-compliant SFP+ ports.

Is the SRX-SFP-10GE-DAC-1M cable passive or active?

This 1 meter direct attach twinax cable is passive, requiring no external power or signal conditioning.

What is the power consumption of this DAC cable?

It consumes less than 0.1 W per end, making it one of the most energy-efficient 10 Gbps connectivity solutions.

Does SRX-SFP-10GE-DAC-1M require any drivers or software?

No, it is plug-and-play with no additional drivers, firmware or software installation required.

Is this SFP+ cable hot-swappable?

Yes, the SRX-SFP-10GE-DAC-1M supports hot-swapping, allowing insertion or removal without powering down your equipment.

What are the typical use cases for this 10 Gbps DAC cable?

Common use cases include server-to-switch uplinks, switch-to-switch stacking, Top-of-Rack deployments and SAN interconnects.

How low is the latency on a direct attach twinax cable?

Direct attach twinax copper offers sub-100 nanosecond latency, ensuring near-instantaneous data transmission.

What operating temperature range does this cable support?

The cable operates reliably between 0 °C and 70 °C, meeting standard data center and telecom environment requirements.

How can I troubleshoot connectivity issues with this DAC cable?

Verify both SFP+ ports are functional, check link LEDs, ensure firm connections, and test cable continuity with a port loopback.

What warranty covers the SRX-SFP-10GE-DAC-1M?

The product comes with a one-year limited warranty covering manufacturing defects under normal operating conditions.

How does a DAC cable differ from fiber optic transceivers?

DAC uses copper twinax for short-range, low-cost, low-power connections, whereas fiber requires transceivers and optics for longer distances.

Can I use the SRX-SFP-10GE-DAC-1M for switch stacking?

Yes, its 10 Gbps bandwidth and minimal latency make it ideal for high-speed switch stacking and uplink applications.

FEATURED DEAL

Name:

SRX-SFP-10GE-DAC-1M

Name: SFP+ 10 GIGABIT ETHERNET DIRECT ATTACH COPPER TWINAX COPPER CBL1M
Brand: Juniper
SKU: SRX-SFP-10GE-DAC-1M
Price: 63.00 USD
Availability: InStock
Rating: 4.2 (5 reviews)

Description:: SFP+ 10 GIGABIT ETHERNET DIRECT ATTACH COPPER TWINAX COPPER CBL1M
Rating:: 4.2(5)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Juniper
GTIN:: 821455062838
Condition:
Warranty:: 3
List Price:: $105.00
Price:: $63.0040% off

Quantity:

Business price:

Enroll your business for free

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

srx-sfp-10ge-dac-1m sfp+ 10 gigabit ethernet direct attach copper twinax copper cbl1m

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

SRX-SFP-10GE-DAC-1M

SFP+ 10 GIGABIT ETHERNET DIRECT ATTACH COPPER TWINAX COPPER...

$105.00 $63.0040% off

11 in Global Warehouse Global

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

SRX-SFP-10GE-DAC-1M Overview

SRX-SFP-10GE-DAC-1M is a 10 Gigabit Ethernet direct attach cable that leverages the SFP+ form factor for high-speed, short-range connectivity in data centers and enterprise networks. Designed with a 1-meter copper interconnect, this module ensures low-latency performance and reliable signal integrity for 10G Ethernet applications.

Optimized for telecom and data center applications, SRX-SFP-10GE-DAC-1M supports critical 10G protocols while reducing complexity by eliminating the need for additional optical components. Its compact dimensions and robust design make it ideally suited for rack-to-rack and switch-to-switch interconnects in high-density networking environments.

SRX-SFP-10GE-DAC-1M price is $63.00, a 40% saving from the Juniper list price of $105.00. SRX-SFP-10GE-DAC-1M is in stock and available for next-day dispatch. (terms applied)

Request bulk order quote for SRX-SFP-10GE-DAC-1M for additional pricing. Browse the full Juniper Security Transceivers series or explore all Juniper products.

SRX-SFP-10GE-DAC-1M Specifications

Product Type: Direct Attach Cable
Form Factor: SFP+
Data Rate: 10G
Connector Type: N/A
Wavelength: N/A
Transmission Distance: Short-Range
Fiber Type: N/A
Max Distance: 1m
Supported Protocols: 10G Ethernet
Network Interface: Ethernet
Power Consumption: N/A
Operating Temperature: 0 to 70°C
Storage Temperature: -40 to 85°C
Input Voltage: N/A
Compatibility: Juniper
Product Name: SRX-SFP-10GE-DAC-1M
Height: N/A
Width: N/A
Depth: N/A
Weight: N/A

SRX-SFP-10GE-DAC-1M Use Case

Top-of-Rack Switch to Server Connectivity in Virtualized Data Centers

In high-density virtualized data centers, IT teams deploy SRX-SFP-10GE-DAC-1M-SFP+ to link top-of-rack switches and blade servers over 1 m direct-attach twinax copper. This short-reach, low-latency connection supports 10 Gbps throughput, reduces switch port oversubscription, and simplifies cabling management. Benefit: accelerated VM provisioning and consistent sub-microsecond latency for I/O-intensive workloads.

High-Performance Storage Array Interconnect for SAN Replication

Enterprise storage architects use SRX-SFP-10GE-DAC-1M-SFP+ to connect SAN storage arrays to Ethernet aggregation switches for synchronous replication and backup. The 10 GbE twinax cable offers superior signal integrity, eliminates transceiver power draw, and maintains optimal performance in rack-dense environments. Benefit: reliable, cost-effective backup replication with predictable throughput and reduced operational costs.

Hyper-Converged Infrastructure Node Linking for AI/ML Clusters

In hyper-converged environments powering AI/ML workloads, system integrators install SRX-SFP-10GE-DAC-1M-SFP+ between compute nodes and aggregation switches. The direct-attach twinax solution delivers stable 10 Gbps connectivity, minimizes power consumption, and supports seamless scaling across GPU-accelerated servers. Benefit: enhanced data exchange rates, lower total cost of ownership, and streamlined cluster expansion.

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	SRX-SFP-10GE-DAC-1M	SRX-SFP-10GE-DAC-3M	SRX-QSFP-40G-SR4	SRX-SFP-10GE-ER	SRX-SFP-1GE-T
Product Type	Direct Attach Cable	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	SFP+	SFP+	QSFP	SFP	SFP
Data Rate	10G	10G	40G	10G	1G
Connector Type	N/A	N/A	MPO	LC	RJ45
Wavelength	N/A	N/A	850 nm	1550 nm	N/A
Transmission Distance	Short-Range	Short-Range	Short-Range	Extended-Range	Short-Range
Fiber Type	N/A	N/A	Multi-mode	Single-mode	N/A
Max Distance	1m	3 meters	100m (OM3) / 150m (OM4)	40 km	100 meters
Supported Protocols	10G Ethernet	Ethernet	Ethernet	Ethernet	Ethernet
Network Interface	Ethernet	Ethernet	Fiber	Ethernet	Ethernet
Power Consumption	N/A	N/A	N/A	1.5W	2.5W
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	N/A	3.3V	3.3V	3.3V	3.3V
Compatibility	Juniper	Juniper	Juniper, Cisco, Huawei, Arista	Cisco / Juniper / Huawei / Arista	Juniper Networks
Product Name	SRX-SFP-10GE-DAC-1M	SRX-SFP-10GE-DAC-3M	SRX-QSFP-40G-SR4	SRX-SFP-10GE-ER	SRX-SFP-1GE-T
Height	N/A	N/A	N/A	0.43 inches	0.33 inches
Width	N/A	N/A	N/A	0.83 inches	0.53 inches
Depth	N/A	N/A	N/A	1.33 inches	2.22 inches
Weight	N/A	N/A	N/A	0.12 lbs	0.07 lbs

Reviews & Ratings

Kevin Brooks

Perfect DAC cable for short rack connections.

Simon Wallace

Plug and play with zero configuration.

Ethan Moore

Clean signal and sturdy build.

Lucas Turner

Reduced costs compared to optics.

Nathan Cole

Reliable for top of rack links.

Questions & Answers

What is SRX-SFP-10GE-DAC-1M?

SRX-SFP-10GE-DAC-1M is a 1 meter SFP+ 10 Gigabit Ethernet Direct Attach Twinax Copper Cable designed for high-speed, low-latency server and switch connections.

What data transfer rate does this cable support?

The cable supports 10 Gbps full-duplex transmission, delivering high-performance connectivity for data centers and high-speed networks.

What is the maximum length of SRX-SFP-10GE-DAC-1M?

The SRX-SFP-10GE-DAC-1M has a fixed length of 1 meter, optimized for short-range, rack-to-rack and switch-to-server links.

Which connector type does the SRX-SFP-10GE-DAC-1M use?

It uses industry-standard SFP+ connectors on both ends, ensuring seamless compatibility with MSA-compliant switches and NICs.

Related Searches Juniper Security Transceivers

SRX-SFP-10GE-DAC-3M QFX-QSFP-DAC-3M 470-AAGP SG350XG-48T SG350XG-24T SG550XG-48T SG550XG-24T SG350XG-2F10

SRX-SFP-10GE-DAC-1M Overview

SRX-SFP-10GE-DAC-1M Specifications

Product Type

Direct Attach Cable

Form Factor

SFP+

Data Rate

10G

Connector Type

N/A

Wavelength

N/A

Transmission Distance

Short-Range

Fiber Type

N/A

Max Distance

Supported Protocols

10G Ethernet

Network Interface

Ethernet

Power Consumption

N/A

Operating Temperature

0 to 70°C

Storage Temperature

-40 to 85°C

Input Voltage

N/A

Compatibility

Juniper

Product Name

SRX-SFP-10GE-DAC-1M

Height

N/A

Width

N/A

Depth

N/A

Weight

N/A

SRX-SFP-10GE-DAC-1M Use Case

Top-of-Rack Switch to Server Connectivity in Virtualized Data Centers

High-Performance Storage Array Interconnect for SAN Replication

Hyper-Converged Infrastructure Node Linking for AI/ML Clusters

Product Comparison Table

	SRX-SFP-10GE-DAC-1M	SRX-SFP-10GE-DAC-3M	SRX-QSFP-40G-SR4	SRX-SFP-10GE-ER	SRX-SFP-1GE-T
Product Type	Direct Attach Cable	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	SFP+	SFP+	QSFP	SFP	SFP
Data Rate	10G	10G	40G	10G	1G
Connector Type	N/A	N/A	MPO	LC	RJ45
Wavelength	N/A	N/A	850 nm	1550 nm	N/A
Transmission Distance	Short-Range	Short-Range	Short-Range	Extended-Range	Short-Range
Fiber Type	N/A	N/A	Multi-mode	Single-mode	N/A
Max Distance	1m	3 meters	100m (OM3) / 150m (OM4)	40 km	100 meters
Supported Protocols	10G Ethernet	Ethernet	Ethernet	Ethernet	Ethernet
Network Interface	Ethernet	Ethernet	Fiber	Ethernet	Ethernet
Power Consumption	N/A	N/A	N/A	1.5W	2.5W
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	N/A	3.3V	3.3V	3.3V	3.3V
Compatibility	Juniper	Juniper	Juniper, Cisco, Huawei, Arista	Cisco / Juniper / Huawei / Arista	Juniper Networks
Product Name	SRX-SFP-10GE-DAC-1M	SRX-SFP-10GE-DAC-3M	SRX-QSFP-40G-SR4	SRX-SFP-10GE-ER	SRX-SFP-1GE-T
Height	N/A	N/A	N/A	0.43 inches	0.33 inches
Width	N/A	N/A	N/A	0.83 inches	0.53 inches
Depth	N/A	N/A	N/A	1.33 inches	2.22 inches
Weight	N/A	N/A	N/A	0.12 lbs	0.07 lbs

Questions & Answers

What is SRX-SFP-10GE-DAC-1M?

SRX-SFP-10GE-DAC-1M is a 1 meter SFP+ 10 Gigabit Ethernet Direct Attach Twinax Copper Cable designed for high-speed, low-latency server and switch connections.

What data transfer rate does this cable support?

The cable supports 10 Gbps full-duplex transmission, delivering high-performance connectivity for data centers and high-speed networks.

What is the maximum length of SRX-SFP-10GE-DAC-1M?

The SRX-SFP-10GE-DAC-1M has a fixed length of 1 meter, optimized for short-range, rack-to-rack and switch-to-server links.

Which connector type does the SRX-SFP-10GE-DAC-1M use?

It uses industry-standard SFP+ connectors on both ends, ensuring seamless compatibility with MSA-compliant switches and NICs.