Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$3,319.01
$2,833.3014.6% off
Quantity:
SG350XG-24T
Cisco SG350XG-24T 350X 22-Port 10 Gigabit Ethernet Switch, 2...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
SG350XG-24T is a managed, stackable 10 Gigabit Ethernet switch for small-business copper aggregation, combining 22 dedicated RJ-45 network ports with two fixed 10G copper/SFP+ combo uplinks. Each shared uplink selects copper or fiber rather than adding simultaneous connections, giving the chassis 24 active network connections; PoE is not available. Its 1U rack-mount chassis belongs to the Cisco 350X Series and connects copper-equipped servers, storage, and downstream switches. Layer 2+ capabilities support local workgroup segmentation alongside managed switching. The discontinued SG350XG-48T provides 46 dedicated copper network ports instead of 22 for a higher-density installation. A separate Gigabit management interface keeps administration off the network interfaces, while the RJ-45 console provides a direct setup path independent of the uplink connection.
SG350XG-24T price for new stock is is available on request. Get immediate quote. SG350XG-24T refurb price is $2,833.30.
Request bulk order quote for SG350XG-24T for additional pricing. Browse the full Cisco SG350X Switches series or explore all Cisco products.
480 Gbps switching capacity provides nonblocking forwarding across the network ports, while 357.12 Mpps forwarding handles 64-byte packets. Static IPv4 and IPv6 routing supports configured gateway paths without dynamic route exchange; the IPv4 table accepts 990 static routes. SG350XG-24T combines 512 MB of DRAM with 256 MB of flash for control-plane operation and firmware storage. The forwarding hardware maintains 32000 MAC addresses, and 4094 active VLANs allow separate broadcast domains. STP, RSTP, and MSTP control switching loops, while LACP combines Ethernet links into aggregated groups. Eight hardware queues support traffic prioritization through strict-priority or weighted round-robin scheduling. Management uses the browser interface and scriptable CLI, with SNMP available for monitoring. Four fans cool the chassis within its 0°C to 50°C operating range. 146.7W worst-case power consumption at 110V sets the switch load to include when sizing rack power.
SG350XG-24T is available New sealed or Certified refurbished, with refurbished units inspected and bench-tested for rated-speed port links and optics bay recognition, then firmware verified and wiped to factory default. Specify the condition, regional power cord, and required optics for this 24-port 10GBASE-T stackable switch on the purchase order. ORM offers new units up to a 3-year extended warranty and certified refurbished units up to 1 year, plus 30-day returns on every condition, terms apply; Cisco's limited lifetime hardware warranty and service ended June 30, 2025. Enterprise and volume orders accept POs, Net-30 for government, and RMA with advance replacement, with regional stock and RMA in the UK, EU, US, and MEA.
| Key Specs | Key Spec Values |
|---|---|
Port Configuration | 22 x 10G copper / 2 x 10G copper/SFP+ combo |
Stacking | True horizontal stacking / 4 members |
Max Power Draw | 146.7W |
Cooling | 4 fans |
Lifecycle Status | End of support June 30, 2025 |
Replacement PID | C1300-24XT |
In a mid-size data center running VMware and KVM hosts, IT teams connect 24 rack servers to the SG350XG-24T via its 24 10GBase-T copper ports, build redundant uplinks over the 2 SFP+ combo ports, and manage the switch through the dedicated Gigabit Ethernet management port. Benefit: Eliminates server uplink bottlenecks with full 10Gbps performance, enhances resilience via link aggregation, and centralizes out-of-band management to streamline operations.
On a corporate campus spanning three buildings, the SG350XG-24T aggregates 10G copper uplinks from floor switches using its 24 10GBase-T ports, links fiber trunks over the 2 SFP+ combo ports, and isolates control traffic via the Gigabit management port. Benefit: Delivers consistent 10G bandwidth for HD video conferencing and large file transfers, scales effortlessly as user count grows, and simplifies network administration with secure, centralized management.
In a post-production studio with ten 4K editing suites, each workstation connects at 10Gbps through the SG350XG-24T’s 24 10GBase-T copper ports, while shared NAS storage traffic flows over high-speed SFP+ fiber links. The dedicated Gigabit Ethernet management port enforces VLAN segmentation and secure access. Benefit: Enables seamless real-time 4K editing and file sharing, minimizes transfer delays, and enforces traffic isolation for streamlined, secure collaboration.
When separate workgroups need local gateways, the 350X supports 128 IPv4 interfaces and 106 IPv6 interfaces, with 245 IPv6 static routes. Gateway placement therefore depends on both interface count and addressing requirements. Specify the VLAN, physical-port, link-aggregation, and loopback interface plan before the PO.
When an existing mixed-speed stack needs another member, the 350X supports hybrid combinations of discontinued SG350X, SG350XG, and SX350X switches. Ring and chain arrangements support link aggregation across stack members. Confirm the existing members, intended topology, and reserved interconnect ports before specifying the order.
When multiple sites need the same configuration baseline, text-editable configuration files and secure SCP downloads support repeatable staging. Dual firmware images provide a separate image for upgrade handling. Specify the configuration file, management addressing, and approved firmware baseline for each destination before issuing a combined purchase order.
PoE-powered phones or access points
SG350XG-24T cannot supply endpoint power. C1300-24P-4X provides 24 Gigabit PoE access ports instead, but reduces copper access speed from 10G to 1G.
Dynamic routing between network segments
SG350XG-24T uses static IPv4 and IPv6 routing rather than dynamic route exchange. Networks requiring automatically learned routes need a different routing device; this switch provides configured local gateways.
Active Cisco manufacturer support
SG350XG-24T reached its last date of support on June 30, 2025. C1300-24XT is the current migration endpoint rather than the discontinued intermediate replacements.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| SG350XG-24T |  SG350XG-48T |  SG350X-48P |  SG350X-24PD |  SG350X-8PMD | |
|---|---|---|---|---|---|
| Depth | 450 mm | 450 mm | 350 mm | 257 mm | 252.5 mm |
| Ethernet Technology | 10 Gigabit Ethernet | 10 Gigabit Ethernet | Gigabit Ethernet | Multi-Gigabit (2.5G/5G) | Multi-Gigabit (2.5G/5G) |
| Flash Memory | 256 MB | 256 MB | 256 MB | 256 MB | 256 MB |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Desktop |
| Height | 44 mm | 44 mm | 44 mm | 44 mm | 44 mm |
| Manufacturer Part Number | SG350XG-24T | SG350XG-48T | SG350X-48P | SG350X-24PD | SG350X-8PMD |
| Memory | 512 MB | 512 MB | 512 MB | 512 MB | 512 MB |
| Power Consumption | 146.7W | 272.6W | 492.3W | 476.6W | 312.4W |
| Switching Capacity | 480 Gbps | 960 Gbps | 176 Gbps | 140 Gbps | 80 Gbps |
| Weight | 5.57 kg | 7.43 kg | 5.82 kg. | 3.99 kg. | 2.74 kg |
| Width | 440 mm | 440 mm | 440 mm | 440 mm | 344.4 mm |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 24 January 2020
24-port 10GBase-T switch delivers stable, high-speed connectivity for critical business networks.
Reviewed on the 11 July 2018
Professional-grade, reliable switch with minimal maintenance.
Reviewed on the 19 February 2021
Smooth operation and consistent throughput across all copper ports.
Reviewed on the 17 October 2017
Reliable performance with easy management for 24-port 10G setups.
Reviewed on the 3 May 2020
Efficient, durable switch ideal for mid-to-large enterprise networks.
SG350XG-24T identifies a 350X stackable managed switch: SG350XG names the model family, 24 indicates twenty-four network connections, and T identifies the 10GBASE-T copper configuration. Two connections are shared with SFP+ cages. The regional ordering variant for the United States is SG350XG-24T-K9-NA.
Cisco 350X switches support browser management over HTTP/HTTPS, a console CLI, SSH, Telnet, SNMP 1/2c/3, Smart Network Application, FindIT Network Manager and Probe, FindIT Network Discovery Utility, and Active Advisor. Network Plug and Play provides provisioning, while the dedicated management interface on SG350XG models separates administrative connections from network ports.
SG350XG-24T is discontinued, with end of sale on June 18, 2020, and Cisco support ending June 30, 2025. Software maintenance ended June 18, 2021. C1300-24XT is the current migration endpoint; SX350X-24-K9-NA and CBS350-24XT-NA are discontinued intermediate replacements, not current-generation alternatives.
ORM offers SG350XG-24T New sealed with up to a 3-year extended warranty or Certified refurbished with up to 1 year, plus 30-day returns on every condition, terms apply. Cisco's original limited lifetime hardware warranty and service ended June 30, 2025. Refurbished units are inspected, bench-tested, firmware verified, and wiped to factory default.
SG350XG-24T has 24 active network connections: 22 dedicated copper ports and two 10G combo pairs, each shared between RJ-45 and SFP+. A combo pair can operate through copper or fiber, not both simultaneously. The separate Gigabit management port is for administration and does not increase the network connection count.
Four Cisco 350X switches can form a hardware stack managed as one system. Discontinued SG350X, SG350XG, and SX350X models can share a hybrid stack using 10G copper or fiber interconnects. SFP-H10GB-CU1M=, SFP-H10GB-CU3M=, and SFP-H10GB-CU5M= provide direct-attach options of 1 m, 3 m, and 5 m.
Yes, SG350XG-24T supports static routing between VLAN interfaces for IPv4 and IPv6, with 990 IPv4 static routes and 245 IPv6 static routes. Routing interfaces can also use physical ports, link aggregation groups, or loopbacks. Route paths must be configured rather than learned through dynamic routing, which limits gateway design to explicitly configured paths.
SG350XG-24T uses an internal universal AC power supply accepting 100-240V AC at 47-63 Hz. Worst-case consumption reaches 146.7W at 110V, so rack power planning should use the switch load rather than a PoE budget. The destination region determines which power cord belongs on the purchase order.
Yes, SG350XG-24T is a 1U rack-mount switch measuring 440 mm wide, 44 mm high, and 450 mm deep, with a weight of 5.57 kg. The chassis package includes a mounting kit. Usable cabinet depth must accommodate the chassis plus the clearance required for connected cables.
SG350X-24P provides PoE+ from 24 Gigabit access ports with a shared 195W budget, whereas SG350XG-24T does not power endpoints. Both switches are discontinued. SG350XG-24T fits existing unpowered 10G copper installations; SG350X-24P addresses legacy powered access, with C1300-24P-4X providing Gigabit powered access for current purchases.
SG350XG-48T has 46 dedicated 10G copper network ports, compared with 22 on SG350XG-24T; each model also has two shared copper/SFP+ connections. Both models are discontinued. SG350XG-24T matches smaller existing copper connection plans, while SG350XG-48T addresses denser legacy installations without changing the shared-uplink architecture.
C1300-24XT offers four shared 10G SFP+ connections, where SG350XG-24T offers two shared 10G SFP+ connections. C1300-24XT is the current migration endpoint through the discontinued SX350X and CBS350 predecessors. SG350XG-24T addresses existing two-fiber-link installations; C1300-24XT accommodates buyers requiring four selectable fiber connections while retaining shared copper/fiber operation.
SFP-10G-SR= and SFP-10G-LR= are supported 10G optics for Cisco 350X shared SFP+ uplinks, covering multimode and single-mode fiber respectively. SFP-10G-SR= supports distances from 26 m to 400 m, while SFP-10G-LR= supports 10 km. The installed fiber type and required distance determine the appropriate transceiver.
480 Gbps switching capacity and 357.12 Mpps forwarding are the SG350XG-24T throughput figures, with forwarding measured using 64-byte packets. The switch is nonblocking and uses a 2 MB packet buffer shared dynamically across its ports. These figures apply when matching the chassis to a server or storage connection plan.
United States
