CAB-SPWR-30CM
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$194.00
$89.2454% off
Quantity:
STACK-T1-1M
Cisco STACK-T1-1M StackWise-480/1T 1 m Stack Cable for Catal...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
STACK-T1-1M is a 1 m Cisco StackWise-480/1T stack cable for Catalyst 9300X and 9300 modular uplink switches, carrying 480 Gbps on StackWise-480 and 1 Tbps on StackWise-1T. The 1 m reach is the edge over the supplied 0.5 m cable when switches are mounted side by side. It does not serve Catalyst 9300L or 9300LM StackWise-320 adapters. A Cisco Catalyst 9300 stack cable uses the rear StackWise ports and gives the stack one management plane and one control plane. Catalyst 3850 StackWise-480 switches also use Type 1 StackWise cables, except WS-C3850-48XS models do not use StackWise-480. STACK-T1-3M is the longer sibling for 3 m paths.
STACK-T1-1M price for new stock is $113.39, a 41.6% saving from the Cisco list price of $194.00. STACK-T1-1M refurb price is $89.24. STACK-T1-1M is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for STACK-T1-1M for additional pricing. Browse the full Cisco 9300 Stack Cables & Kits series or explore all Cisco products.
480 Gbps of stack bandwidth applies to Catalyst 9300 and Catalyst 3850 StackWise-480 stacks; 1 Tbps applies to homogeneous Catalyst 9300X StackWise-1T stacks. Eight Catalyst 9300 members form the maximum data stack; Catalyst 3850 reaches nine members, with 4-ASIC Catalyst 3850 models limited to 8 members. Full-ring cabling gives full bandwidth and redundant StackWise connections; incomplete cabling leaves half bandwidth and no redundant link. STACK-T1-1M connects either end to any StackWise-480/1T rear stack port, and the connector screws need finger-tightening. C9300X mixed with C9300 runs at 480 Gbps, while fixed uplink Catalyst 9300L and 9300LM stacks use StackWise-320. Catalyst 9300 runs Cisco IOS XE 16.9.2 or later.
STACK-T1-1M is offered in new sealed and certified refurbished conditions. Certified refurbished cables have connectors, pins, latches and housing inspected, are connected between two compatible switches, and bring the stack link up at the rated bandwidth. New units carry up to 3-year extended warranty, and certified refurbished units carry up to 1 year; returns are 30 days on every condition, terms apply. A full ring of n switches needs n cables; a chain needs n minus one, so confirm the member count and 1 m path. Regional stock/RMA: UK · EU · US · MEA. RMA with advance replacement. PO accepted · Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Stacks | Catalyst 9300X / Catalyst 9300 / Catalyst 3850 |
Technology | StackWise-480, 480 Gbps / StackWise-1T, 1 Tbps |
Stack Features | 1 Tbps StackWise-1T / Stateful switchover |
Length | 1 m |
Max Members | Catalyst 9300: 8 / Catalyst 3850: 9 |
Topology | Full ring / Half ring |
STACK-T1-1M operates between rear StackWise ports on Catalyst 9300 or 9300X access switches that need more clearance than a 0.5 m route. Engineers route the 1 m Type 1 cable through the rear path, keep the bend radius at 1.6 in. or wider, and tighten the connector screws by hand after confirming Cisco-logo-up orientation. The link forms part of the StackWise ring and leaves a serviceable cable path around rear guides. This layout keeps future member swaps straightforward during maintenance windows.
STACK-T1-1M fits compact distribution or collapsed access blocks built from Catalyst 9300 modular uplink members. The cable connects one Cisco StackWise-480/1T port to the neighboring switch and gives extra routing room compared with the 50 cm sibling. Platform bandwidth follows the installed model, with C9300X operating at StackWise-1T and C9300 operating at StackWise-480. The stack gains a controlled short-link path for high-availability switching and shared management. It also keeps bill-of-materials language tied to the correct Type 1 accessory family during procurement.
Operations teams standardize STACK-T1-1M as the one meter Type 1 spare for approved Catalyst 9300 and 9300X modular uplink stacks. The SKU separates StackWise-480/1T cabling from C9300L Type 3 kit parts, reducing wrong-cable pulls during maintenance. Technicians store dust covers, inspect connector screws, and reserve 50 cm or 3 m siblings for different rear-panel paths. The spare pool stays aligned to documented platforms and restores stack links with fewer procurement mismatches. This approach supports quicker audits before planned stack change windows.
A buyer replacing a bad StackWise link needs the same Type 1 cable length to restore the ring. A broken link leaves the data stack at half bandwidth and removes the redundant StackWise path, so match the 1 m cable route before the PO.
A stack expansion from three to four Catalyst 9300 members needs the added switch cabled before power-up. A full ring of four members needs four data stack cables, and the 1 m path must reach the rear ports without strain.
Side-by-side mounted switches need longer reach than adjacent vertical members. The 1 m Type 1 cable suits short horizontal paths, while the full ring still needs one cable per stack member. Measure the rear-port route before the PO.
Catalyst 9300L stack
Catalyst 9300L uses StackWise-320 adapters, not Type 1 rear ports. Use STACK-T3-1M with the C9300L Stack Kit for a 1 m Type 3 link.
Catalyst 9300LM stack
Catalyst 9300LM uses Type 3A StackWise-320 cables with the kit2 adapter. Use STACK-T3A-1M for the 1 m 9300LM link.
WS-C3850-48XS stack
WS-C3850-48XS models do not use StackWise-480. This cable does not create a data stack on WS-C3850-48XS-S, WS-C3850-48XS-E, WS-C3850-48XS-F-S or WS-C3850-48XS-F-E.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 7 May 2024
The 1 m length matched the rack plan and gave enough clearance around rear cable guides.
Reviewed on the 5 July 2026
Helpful SKU detail made it easy to separate Type 1 cabling from fixed-uplink stack kits.
Reviewed on the 25 August 2024
Connector condition was clean, and the screws seated properly during Catalyst stack staging.
Reviewed on the 10 August 2020
The cable worked well for a short distribution stack with tidy rear-panel routing.
Reviewed on the 26 September 2025
Good fit for C9300 stack preparation, with clear length and compatibility details for procurement.
Reviewed on the 1 September 2026
Useful replacement cable for StackWise planning, though rack measurements still needed careful review.
Reviewed on the 1 May 2021
The product information helped our team avoid mixing Type 1 and Type 3 cable parts.
STACK-T1-1M is the Cisco 1M Type 1 stacking cable for StackWise-480 and StackWise-1T. The STACK segment marks a stacking accessory, T1 marks the Type 1 cable family, and 1M marks the 1 m length for Catalyst 9300X and 9300 modular uplink stacks.
STACK-T1-1M fits Catalyst 9300X, Catalyst 9300 and Catalyst 3850 StackWise-480 ports. Catalyst 9300L uses STACK-T3-1M or the Type 3A family with adapters, and Catalyst 9300LM uses Type 3A cables. WS-C3850-48XS models do not use StackWise-480.
A Catalyst 9300X uses Type 1 StackWise cables for its rear StackWise-1T ports. STACK-T1-1M is the 1 m option, with STACK-T1-50CM for 0.5 m paths and STACK-T1-3M for 3 m paths. Mixed C9300X and C9300 stacks run at 480 Gbps.
STACK-T1-1M carries the StackWise bandwidth of the switch family. Catalyst 9300 and Catalyst 3850 StackWise-480 stacks run at 480 Gbps, while a homogeneous Catalyst 9300X StackWise-1T stack runs at 1 Tbps. A mixed Catalyst 9300X and 9300 stack runs at 480 Gbps.
A full ring needs one STACK-T1-1M cable per switch when every stack link is a 1 m path. A chain uses one fewer cable than the member count. Use 1 m where switches are side by side or spaced within the rack.
A STACK-T1-1M stack follows the member cap of the switch family. Catalyst 9300X and Catalyst 9300 stacks use up to 8 members. Catalyst 3850 stacks use up to 9 members, with selected 4-ASIC Catalyst 3850 models limited to 8 members.
STACK-T1-1M connects to the rear StackWise-480/1T port on each switch. Remove the dust covers, align the connector with the Cisco logo on top, insert the cable, and finger-tighten the screws. Connect stack cables before powering a new member.
STACK-T1-1M can join Catalyst 9300X and Catalyst 9300 modular uplink switches in one data stack at 480 Gbps. A homogeneous Catalyst 9300X full ring can run at 1 Tbps. Catalyst 9300L, 9300LM and Catalyst 3850 do not mix in that Catalyst 9300 modular stack.
STACK-T1-1M= is the spare ordering form for the 1 m Type 1 cable. STACK-T1-1M-RF is the Cisco-remanufactured form. Cisco-remanufactured is separate from ORM certified refurbished, which is inspected and bench-tested between two compatible switches.
STACK-T1-1M and STACK-T1-3M use the same Type 1 StackWise-480/1T technology, but the length changes the fit. STACK-T1-1M suits 1 m side-by-side or spaced paths. STACK-T1-3M suits longer cross-rack paths where 1 m cannot reach without strain.
STACK-T1-1M fits Type 1 StackWise-480/1T ports on Catalyst 9300X and 9300 modular uplink switches. STACK-T3-1M fits StackWise-320 Type 3 adapters for Catalyst 9300L. The equal 1 m length does not make the two cable families interchangeable.
Cisco has not announced an end-of-sale date for STACK-T1-1M. The cable serves Catalyst 9300X, Catalyst 9300 and Catalyst 3850 StackWise-480 ports. Match the switch family and model lifecycle separately when the stack contains Catalyst 3850 hardware.
ORM offers STACK-T1-1M new sealed with up to 3-year extended warranty and certified refurbished with up to 1 year. Returns are 30 days on every condition, terms apply. Cisco Enhanced Limited Lifetime hardware warranty is the manufacturer term for Catalyst 9300 Series hardware.