United States
Q
What is a Brocade Networking Compatible SFP 100Mb?
A
A Brocade Networking Compatible SFP 100Mb is a small form-factor pluggable transceiver designed for 100 Mbps Ethernet links. It meets MSA standards and works seamlessly in Brocade switches, delivering reliable fiber or copper connectivity at Fast Ethernet speeds.
Q
Which Brocade switches support the Compatible SFP 100Mb?
A
Most Brocade Fast Iron, ICX series, and older NetIron switches support the 100Mb SFP. Check the switch datasheet for exact slot compatibility. The module is hot-swappable and interoperable across Brocade’s MSA-compliant 100Mb SFP ports.
Q
What is the maximum cable distance for this SFP module?
A
Distance depends on media: over multimode fiber (OM1/OM2) it spans up to 220 m; OM3/OM4 up to 550 m. Using single-mode fiber, it can reach 10 km. Always verify cable type and quality for optimal performance.
Q
Can I use copper or fiber cables with the 100Mb SFP?
A
Yes. You can use fiber SFPs with LC-terminated multimode or single-mode fiber cables. For copper, select the 100Mb RJ45 SFP variant. Ensure your Brocade switch slot supports the chosen media type.
Q
Is the Brocade Compatible SFP 100Mb hot-swappable?
A
Yes. The SFP 100Mb module supports hot-swap insertion and removal without powering down the switch. This maintains network uptime and reduces maintenance windows.
Q
Does this SFP module comply with SFF MSA standards?
A
Absolutely. The module is fully compliant with SFP Multi-Source Agreement (MSA) specifications, ensuring interoperability with all MSA-compatible Brocade switches and third-party network devices.
Q
What are the power and temperature specifications?
A
Typical power consumption is under 1 W. Operating temperature ranges from 0 °C to 70 °C. Storage temperature spans –40 °C to 85 °C. Check the datasheet for detailed thermal and electrical characteristics.
Q
How do I install a Brocade Compatible SFP 100Mb?
A
1. Power on the switch. 2. Remove the dust cover. 3. Align and gently insert the SFP until it latches. 4. Verify link LEDs turn green. No reboot is required.
Q
Does the 100Mb SFP support Digital Diagnostics Monitoring (DDM)?
A
Yes. Many compatible modules include DDM (DOM) for real-time monitoring of temperature, voltage, bias current and optical power. Use Brocade CLI or SNMP to access diagnostic data.
Q
What link speed and distance can I expect?
A
The module delivers a fixed 100 Mbps Ethernet link. Distance varies by fiber type: up to 220 m on OM1/OM2, 550 m on OM3/OM4, and up to 10 km on single-mode fiber.
Q
How can I verify Brocade SFP 100Mb compatibility?
A
Consult Brocade’s hardware compatibility list, check switch firmware release notes, or use the ‘show module’ CLI command. Ensure the SFP’s part number matches Brocade’s supported transceiver list.
Q
What is the part number for the Brocade Compatible SFP 100Mb?
A
Common compatible part numbers include third-party codes like SFP-100BX (fiber) or SFP-100TX (copper). Always cross-reference with Brocade’s official transceiver compatibility matrix.
Q
How reliable are Brocade Networking Compatible SFPs?
A
They undergo rigorous testing to meet industry standards (IEC, TIA/EIA). Vendors often specify MTBF exceeding 500,000 hours. Reliability matches or exceeds OEM transceivers.
Q
What warranty covers the compatible SFP 100Mb?
A
Most vendors offer a limited lifetime or one-year warranty covering defects and performance issues. Review your supplier’s warranty policy for coverage details and RMA procedures.
Q
How do I troubleshoot link issues with the 100Mb SFP?
A
1. Check fiber continuity and polarity. 2. Verify SFP module seating. 3. Inspect link LEDs. 4. Use CLI ‘show interfaces’ for error stats. 5. Replace suspected faulty modules or cables.
Q
Are compatible SFPs cost-effective alternatives to OEM?
A
Yes. Compatible SFPs typically cost 30–50% less than OEM modules while maintaining full MSA compliance and warranty support, offering significant savings without sacrificing performance.
