United States
Q
What is Brocade Networking Compatible XFP CWDM?
A
Brocade Compatible XFP CWDM is a 10 Gbps hot-swappable optical transceiver that uses coarse wavelength-division multiplexing (CWDM) for cost-effective, high-capacity fiber links.
Q
What data rates does Brocade XFP CWDM support?
A
Brocade XFP CWDM modules support a line rate of 9.95 Gbps to 11.3 Gbps, ensuring full compatibility with 10 GbE, SONET OC-192, and OTU2 applications.
Q
What is the maximum transmission distance of Brocade XFP CWDM modules?
A
Typical reach extends up to 80 km over single-mode fiber, depending on optical budget and channel wavelength.
Q
Which Brocade switches and routers support XFP CWDM modules?
A
Brocade XFP CWDM modules are compatible with Brocade MLX, ICX, NetIron, and Vyatta platforms that feature XFP ports and CWDM optics support.
Q
How many CWDM wavelengths are available in Brocade XFP modules?
A
Brocade XFP CWDM modules cover 18 ITU-G.694.2 wavelengths from 1270 nm to 1610 nm in 20 nm increments.
Q
What is the difference between CWDM and DWDM in Brocade XFP?
A
CWDM uses wider 20 nm channel spacing for lower cost and simpler cooling, whereas DWDM uses 0.8 nm spacing for higher channel density over longer reaches.
Q
Is the Brocade XFP CWDM module MSA compliant?
A
Yes, Brocade XFP CWDM modules adhere to the XFP and CWDM MSA specifications for guaranteed interoperability with any compliant host device.
Q
Can I hot-swap Brocade XFP CWDM modules without downtime?
A
Yes, Brocade XFP CWDM modules are hot-swappable and can be inserted or removed without powering down the switch or router.
Q
What fiber type is required for Brocade XFP CWDM?
A
Brocade XFP CWDM modules require ITU-G.652 single-mode fiber (SMF) with an LC connector to achieve specified reach and performance.
Q
How do I install a Brocade XFP CWDM module?
A
Align the LC connector, insert the XFP CWDM module into the host port until it clicks, then verify recognition via your switch’s CLI show interfaces command.
Q
What are the key benefits of using Brocade XFP CWDM?
A
Key benefits include cost-effective wavelength multiplexing, simplified network expansion, hot-swap capability, and broad device interoperability.
Q
Are Brocade XFP CWDM modules compatible with third-party devices?
A
Yes, as long as the third-party device supports XFP and CWDM MSA optics, Brocade XFP CWDM modules will interoperate seamlessly.
Q
How can I test and monitor Brocade XFP CWDM performance?
A
Use the Fabric OS CLI show interface transceiver commands or SNMP MIBs to monitor real-time power, temperature, voltage, and bias current metrics.
Q
What environmental specifications apply to Brocade XFP CWDM modules?
A
Operating temperature ranges from 0 °C to 70 °C, storage temperature from −40 °C to 85 °C, with relative humidity 5%–85% non-condensing.
Q
What warranty and support options are available for Brocade XFP CWDM?
A
Brocade XFP CWDM modules include a one-year warranty and access to 24×7 global technical support through Brocade’s customer portal.
Q
How do I troubleshoot common issues with Brocade XFP CWDM modules?
A
Check link status via show interface, verify correct wavelength mapping, clean fiber end-faces, and replace any optics failing diagnostic thresholds.
