Transceiver Modules Cisco Compatible SFP28

A

A Cisco Compatible SFP28 is a third-party 25Gbps small form-factor pluggable transceiver engineered to deliver full interoperability with Cisco networking equipment.

A

A Cisco Compatible SFP28 offers the same performance, interoperability, and compliance with industry standards as Cisco OEM modules but at a lower cost.

A

Cisco Compatible SFP28 modules are supported on Nexus 9000 and Catalyst 9000 series switches, ASR routers, and any device with a 25Gbps SFP28 port.

A

Cisco Compatible SFP28 transceivers support data rates up to 25Gbps per channel for high-speed data center and enterprise applications.

A

Models are available for multimode fiber (up to 100m to 300m) using 850nm optics and single-mode fiber (up to 10km to 80km) using 1310nm or DWDM optics.

A

Yes, Cisco Compatible SFP28 modules are hot-swappable, allowing insertion and removal without powering down the network device.

A

Align the SFP28 module with the port, insert it until it clicks, and close the port latch; the module will be recognized automatically once seated.

A

Run the \

A

Cisco Compatible SFP28 modules support 850nm for multimode, 1310nm for single-mode, and DWDM wavelengths in specified models.

A

Typical power consumption ranges from 1.0W to 1.5W per module, depending on the optic type and reach.

A

Yes, Cisco Compatible SFP28 modules adhere to IEEE and MSA standards, ensuring interoperability with other compliant transceivers.

A

Cisco Compatible SFP28 modules offer an MTBF exceeding 1,000,000 hours, providing reliable operation in demanding network environments.

A

Check fiber cleanliness, verify port configuration, use diagnostic commands like \

A

Yes, most Cisco Compatible SFP28 modules include a limited lifetime warranty covering manufacturing defects and performance issues.

A

You can purchase Cisco Compatible SFP28 modules from authorized distributors and reputable online retailers specializing in networking hardware.