Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$57.75
Quantity:
UCSB-PSU-2500ACPL
Cisco UCSB-PSU-2500ACPL 2500W AC Platinum Hot-Swap Power Sup...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
UCSB-PSU-2500ACPL is a 2500W AC internal power supply for the Cisco UCS 5108 Server Chassis AC version, with hot-swap service in redundant chassis power modes. The 180-264V AC input keeps the module on 200-240V circuits, and a UCS 5108 with the Cisco UCS 6324 Fabric Interconnect takes a different AC supply. The Cisco UCS 5108 power supply fits UCSB-5108-AC2 and N20-C6508 AC chassis builds. The module does not fit the DC chassis, the HVDC chassis, or UCS Mini builds with UCS 6324 Fabric Interconnect modules. Up to four supplies run in nonredundant, N+1, or grid-redundant modes. UCSB-PSU-2500ACDV is the replacement PID and adds AC dual-voltage use for the UCS 6324 Fabric Interconnect.
UCSB-PSU-2500ACPL price for new stock is is available on request. Get immediate quote. UCSB-PSU-2500ACPL refurb price is $57.75.
Request bulk order quote for UCSB-PSU-2500ACPL for additional pricing. Browse the full Cisco UCS 5108 Chassis Power Supplies series or explore all Cisco products.
2500W maximum output per power supply sets the bay rating for each front-accessible UCS 5108 position. 180-264V AC input and less than 16A at 200V AC require a 200-240V rack PDU circuit. 12V DC at 208A output and 3.3V DC at 5A standby output are the supply-side rails. 12 ms hold-up time at 2500W and 8530 BTU/hr maximum heat output set the power and cooling checks before the PO. Platinum efficiency is 90% at 20% load, 94% at 50% load, and 91% at 100% load. IEC 60320 C20 input uses a C19 cord; CAB-AC-2500W-US1 is the North America non-locking cord and CAB-AC-C6K-TWLK is the locking cord. UCSB-PSU-2500ACPL requires UCS Software Release 2.0(2) or later, and the chassis operating range is 10°C to 35°C.
Order UCSB-PSU-2500ACPL as new sealed or certified refurbished for an AC UCS 5108 bay with 200-240V facility power. Certified refurbished units are inspected and bench-tested in a compatible host or on a load tester, with housing, latch, connector pins, rated-voltage output, status LEDs, and hot insertion and removal verified in a live host. New units carry up to a 3-year extended warranty, and certified refurbished units carry up to 1 year. Returns are 30 days on every condition; terms apply. Regional stock and RMA with advance replacement cover UK, EU, US, and MEA sparing, and PO accepted with Net-30 for government.
| Key Specs | Key Spec Values |
|---|---|
Rated Output | 2500W per power supply |
Input | AC, 180-264V AC, IEC 60320 C20 |
Fits | UCS 5108 AC chassis |
Hot-Swap | Hot-swap with N+1 or grid redundancy |
Efficiency | Platinum |
Lifecycle Status | Cisco stopped selling it on December 30, 2015 |
A failed AC UCS 5108 chassis supply with PID UCSB-PSU-2500ACPL needs a 2500W hot-swap AC module that matches the chassis power type. Confirm UCSB-5108-AC2 or N20-C6508 on the chassis label, then specify 200-240V AC input and the required C19 cord before the PO.
A UCS 5108 chassis moving from nonredundant to N+1 or grid redundancy needs the power-supply count and bay order set before the PO. Use slots 1 and 3 for two redundant supplies, and use four supplies for grid redundancy above 2500W chassis draw.
A sparing pool for UCS 5108 AC chassis keeps the ended sale date separate from chassis support. The supply stopped selling on December 30, 2015, while the UCS 5108 Series support date is December 31, 2030. Specify condition, VID label status, and C20 input before the PO.
UCS 6324 Fabric Interconnect builds
UCSB-PSU-2500ACPL does not fit UCS 5108 chassis builds with UCS 6324 Fabric Interconnect modules; AC builds use UCSB-PSU-2500ACDV for that power-supply slot.
100-120V AC circuits
UCSB-PSU-2500ACPL is rated for 180-264V AC input. UCS 5108 low-line AC service uses UCSB-PSU-2500ACDV with UCS 6324 Fabric Interconnect modules.
-48V DC chassis
UCSB-PSU-2500ACPL is an AC supply and does not fit UCS 5108 DC chassis versions; the -48V DC chassis uses UCSB-PSU-2500DC48.
200-380V DC chassis
UCSB-PSU-2500ACPL does not fit the UCS 5108 high-voltage DC chassis; the 200-380V DC chassis uses UCSB-PSU-2500HVDC in the same bay family.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| UCSB-PSU-2500ACPL |  N20-PAC5-2500W |  UCSC-PSU1-1050W |  UCSC-PSU1-770W |  UCS-PSU-6248UP-AC | |
|---|---|---|---|---|---|
| Form Factor | Internal Module | Internal Module | Internal Module | Internal Module | Internal Module |
| Hot-Swap Capable | Hot-Swap | Hot-Swap | Hot-Swap | Hot-Swap | Hot-Swap |
| Wattage | 2500W | 2500W | 1050W | 770W | 750W |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
UCSB-PSU-2500ACPL is the 2500W Platinum AC Hot Plug Power Supply for UCS 5108 Chassis. The description means 2500W output, AC input, Platinum efficiency, and hot-plug service in the Cisco UCS 5108 AC chassis. The spare form is UCSB-PSU-2500ACPL=, and the replacement PID is UCSB-PSU-2500ACDV.
UCSB-PSU-2500ACPL fits Cisco UCS 5108 AC chassis builds, specifically UCSB-5108-AC2 and N20-C6508. It does not fit UCS 5108 builds with UCS 6324 Fabric Interconnect modules; those AC builds take UCSB-PSU-2500ACDV. It also does not fit the DC or high-voltage DC chassis.
A Cisco UCS 5108 AC chassis uses UCSB-PSU-2500ACPL or N20-PAC5-2500W, while the DC chassis uses UCSB-PSU-2500DC48. UCS Mini builds with UCS 6324 Fabric Interconnect modules use UCSB-PSU-2500ACDV or UCSB-PSU-2500DC48. High-voltage DC chassis builds use UCSB-PSU-2500HVDC.
UCSB-PSU-2500ACPL is rated at 2500W with 180-264V AC input, 47-63 Hz frequency, and less than 16A input current at 200V AC. Output is 12V DC at 208A, with 3.3V DC standby output at 5A. Hold-up time is 12 ms at 2500W.
Yes, UCSB-PSU-2500ACPL is hot-swappable in a UCS 5108 chassis with redundant power capacity. Removing a supply in a chassis with more than two supplies leaves the servers operating when the remaining supplies meet the chassis load. Two-supply redundant mode uses slots 1 and 3.
No, UCSB-PSU-2500ACPL is rated for 180-264V AC input and needs 200-240V facility power. A 100-120V AC UCS 5108 build uses UCSB-PSU-2500ACDV only with the UCS 6324 Fabric Interconnect. Confirm the circuit voltage and chassis configuration before the PO.
UCSB-PSU-2500ACPL uses an IEC 60320 C20 input and a cord with a C19 connector at the chassis end. For North America 200-240V AC, order CAB-AC-2500W-US1 for non-locking service or CAB-AC-C6K-TWLK for locking service. Each power supply has its own cord.
No, UCSB-PSU-2500ACPL cannot mix with DC power supplies in the same UCS 5108 chassis. AC and DC power supplies are keyed for their matching power distribution system. A DC chassis uses UCSB-PSU-2500DC48, and a high-voltage DC chassis uses UCSB-PSU-2500HVDC.
The spare form for UCSB-PSU-2500ACPL is UCSB-PSU-2500ACPL=. That spare is the same 2500W Platinum AC hot-plug power supply for a UCS 5108 chassis. After the supply stopped selling, the replacement PID became UCSB-PSU-2500ACDV, with UCSB-PSU-2500ACDV= as the spare form.
UCSB-PSU-2500ACDV is the replacement PID and the dual-voltage AC option for UCS 5108 builds with UCS 6324 Fabric Interconnect modules. UCSB-PSU-2500ACPL is a 200-240V AC Platinum unit for AC chassis builds without that module. Choose the PID that matches the chassis label and input circuit.
UCSB-PSU-2500ACPL provides 2500W output at 200-240V AC and uses an IEC 60320 C20 input. N20-PAC5-2500W is the lower-output AC supply, rated at 800W on 100-120V AC and 1050W on 200-240V AC, with an IEC 60320 C14 input. Match the failed module PID.
UCSB-PSU-2500ACPL is the AC power supply for UCS 5108 AC chassis builds, while UCSB-PSU-2500DC48 is the -48V DC power supply for DC chassis builds. The chassis power distribution system is keyed by input type. Match AC or DC before ordering a replacement.
Cisco stopped selling UCSB-PSU-2500ACPL on December 30, 2015. The UCS 5108 Series Blade Server Chassis stopped selling on December 31, 2025, and support for that chassis runs until December 31, 2030. The replacement PID for the power supply is UCSB-PSU-2500ACDV.
ORM offers UCSB-PSU-2500ACPL as new sealed or certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host or on a load tester, with hot insertion and removal verified in a live host. New units carry up to a 3-year extended warranty; certified refurbished units carry up to 1 year. Returns are 30 days; terms apply.
United States
