Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$3,725.85
$1,294.1065.3% off
Quantity:
C-NIM-1X
Cisco C-NIM-1X 1-Port 10G SFP+ Network Interface Module for...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense




Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C-NIM-1X is the Cisco 1-port 10-Gbps/1-Gbps WAN with 256-bit WAN MACsec Network Interface Module for Catalyst 8300, with one SFP+ port for 1 Gbps or 10 Gbps Ethernet. The 10-Gbps WAN connection is non-oversubscribed through a 10-Gbps backplane link. Catalyst 8200 does not take this module. The Cisco Catalyst 8300 Network Interface Module fits C8300-2N2S-4T2X, C8300-2N2S-6T, C8300-1N1S-4T2X and C8300-1N1S-6T. It occupies a NIM slot, or two modules fit a C-SM-NIM-ADPT carrier in one SM-X slot. The routed Layer 3 port terminates external Layer 2 trunks, and the router routes traffic entering the module. Compared with C-NIM-2T, this 1-port 10G SFP+ WAN NIM carries 10 Gbps and a 10-Gbps backplane connection; C-NIM-2T stays at 1 Gbps.
C-NIM-1X price for new stock is $1,391.25, a 62.7% saving from the Cisco list price of $3,725.85. C-NIM-1X refurb price is $1,294.10. C-NIM-1X is in stock and available for free next-day delivery. (terms applied)
Request bulk order quote for C-NIM-1X for additional pricing. Browse the full Cisco C-NIM Catalyst 8300 Interface Modules series or explore all Cisco products.
10 Gbps per port uses Cisco SFP+ optics or SFP-H10GB-ACU-7M and SFP-H10GB-ACU-10M copper cables, and 1 Gbps uses Cisco SFP optics. 100BASE and 10BASE SFP modules do not fit, and RJ-45 copper SFP transceivers do not fit. C-NIM-1X reports an EN LED and SFP+ status LED; green indicates the module or optic is enabled. Online insertion only applies in a NIM slot, and removal from that slot requires power down. Full OIR applies when the module sits in a C-SM-NIM-ADPT carrier. Cisco IOS XE 17.3.2 and Cisco IOS XE SD-WAN 17.3.2 are the minimum releases; vManage 20.3.2 is the minimum manager release. 32 mm height, 89 mm width, 184 mm depth and 0.24 kg weight set the slot clearance.
C-NIM-1X is offered new sealed and certified refurbished. Certified refurbished units are inspected and bench-tested in a compatible host; optics bay recognition and every port links at rated speed with a Cisco transceiver. Before the PO, confirm the Catalyst 8300 model, free NIM slot or C-SM-NIM-ADPT SM-X carrier, Cisco IOS XE 17.3.2 minimum and the SFP or SFP+ optic. UK, EU, US and MEA stock/RMA regions carry RMA with advance replacement; PO accepted and Net-30 for government. Warranty terms are new — up to 3-year extended and certified refurbished — up to 1 year, with 30 days on every condition; terms apply.
| Key Specs | Key Spec Values |
|---|---|
Ports | 1 x 1/10G SFP+ |
Capacity | 10-Gbps backplane connection |
Fits | Catalyst 8300 |
Module Features | Non-oversubscribed 10G WAN / 256-bit WAN MACsec |
Requires | NIM slot or C-SM-NIM-ADPT carrier |
Slot | 1RU: 1 NIM / 2RU: 2 NIM |
A router owner replacing a failed 10G WAN NIM needs the same C-NIM-1X in the same Catalyst 8300 NIM slot. The replacement must match the SFP+ optic, Cisco IOS XE 17.3.2 floor and 10-Gbps far end. Count one module per failed port before the PO.
A branch moving from 1G WAN to a 10G optical handoff needs one C-NIM-1X and one matching Cisco SFP+ optic or SFP-H10GB-ACU cable. The far end must run 1 Gbps or 10 Gbps; 100BASE/10BASE and RJ-45 copper SFPs do not fit. Count optics before the PO.
A Catalyst 8300 build with extra routed WAN handoffs uses direct NIM slots first, then C-SM-NIM-ADPT carriers for two NIMs in each SM-X slot. Count 2 NIM slots on 2RU models, 1 NIM slot on 1RU models and the carrier count before the PO.
Catalyst 8200 host
C-NIM-1X does not fit Catalyst 8200 or Catalyst 8200L. Use C-NIM-2T for 100M/1G dual-mode WAN on those hosts.
RJ-45 copper WAN
C-NIM-1X does not take RJ-45 copper SFP transceivers or 100BASE/10BASE SFP modules. Use C-NIM-1M for one 100M/1G/2.5G RJ-45 WAN port.
Four switched SFP+ ports
C-NIM-1X gives one routed SFP+ WAN port and no local Layer 2 switching. Use C-NIM-4X for four 1/10G SFP/SFP+ switch ports with optional L3.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| Connector Type | SFP+ | USB-C | SFP+ | PCIe | SFP+ |
| Form Factor | Plug-in Module | USB | Modular | PCIe | PCIe |
| Module Type | Network Interface Module | 4G LTE | Ethernet Module | 4G LTE | Fibre Channel |
| Operating Temperature | 0°C to 40°C | 0 to 70°C | 0 to 70°C | 0 to 70°C | 0 to 70°C |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 90 days, for dependable protection on every order. The exact term is confirmed on your quote, order confirmation and invoice.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
Same-day dispatch from regional hubs, free next-day delivery*, fully tracked and insured.
Reviewed on the 21 January 2026
Reliable 10G interface for secure enterprise WAN deployments.
Reviewed on the 13 February 2019
Professional expansion module with consistent throughput.
Reviewed on the 20 January 2020
Smooth integration into ISR platforms.
Reviewed on the 16 March 2017
Strong security and predictable performance.
Reviewed on the 19 January 2024
1-Port 10G NIM module delivers stable high-speed connectivity with MACsec support.
Reviewed on the 1 February 2024
Dependable 10G upgrade for branch routers.
C-NIM-1X is the Cisco Catalyst 8300 1-port 10-Gbps/1-Gbps SFP+ WAN Network Interface Module with 256-bit WAN MACsec. C means Catalyst, NIM means Network Interface Module, 1X identifies one 10G SFP+ WAN port, and C-NIM-1X= is the spare form.
C-NIM-1X fits Catalyst 8300 models C8300-2N2S-4T2X, C8300-2N2S-6T, C8300-1N1S-4T2X and C8300-1N1S-6T. It does not fit Catalyst 8200 or 8200L. It uses a NIM slot, or a C-SM-NIM-ADPT carrier in an SM-X slot.
Catalyst 8300 uses C-NIM-1X for one 1/10G SFP+ routed WAN port. The same Ethernet module set also gives C-NIM-2T for two 100M/1G dual-mode WAN groups, C-NIM-1M for one 1G/2.5G RJ-45 WAN port, and C-NIM-4X for four 1/10G SFP+ LAN/WAN switch ports.
C-NIM-1X has one SFP+ port for Ethernet at 1 Gbps or 10 Gbps. The far end must match the selected optic speed. The module does not take 100BASE or 10BASE SFP modules, and RJ-45 copper SFP transceivers do not fit.
C-NIM-1X takes 10G SFP-10G-SR, SFP-10G-LR, SFP-10G-ER, SFP-10G-LRM, SFP-10G-BXD-I, SFP-10G-BXU-I and SFP-H10GB-ACU-7M or SFP-H10GB-ACU-10M. It also takes 1G GLC-SX-MMD, GLC-LH-SMD, GLC-ZX-SMD and GLC-EX-SMD. Order one optic or cable per active port.
A C8300-2N2S-4T2X or C8300-2N2S-6T has 2 NIM slots and reaches 6 NIMs with C-SM-NIM-ADPT carriers. A C8300-1N1S-4T2X or C8300-1N1S-6T has 1 NIM slot and reaches 3 NIMs with the carrier. Empty slots need blank faceplates.
C-NIM-1X adds a non-oversubscribed 10-Gbps WAN connection over a 10-Gbps backplane link. It also adds full 256-bit WAN MACsec and the same routed Layer 3 feature set as the host embedded WAN ports. Layer 2 switching between module ports or system ports is not available.
C-NIM-1X needs Cisco IOS XE 17.3.2 minimum on Catalyst 8300 in autonomous mode. Cisco IOS XE SD-WAN 17.3.2 is the minimum for controller mode, and vManage 20.3.2 is the minimum manager release. The host software floor and the module floor are the same release.
C-NIM-1X carries one 1/10G SFP+ WAN port and has the edge at 10 Gbps with a 10-Gbps backplane link. C-NIM-2T carries two 100M/1G dual-mode RJ-45/SFP groups. Choose C-NIM-1X for 10G fiber WAN, or C-NIM-2T for two lower-speed WAN handoffs.
C-NIM-1X is fiber/SFP+ and reaches 10G; C-NIM-1M is one RJ-45 port for 100M/1G/2.5G and 90W IEEE 802.3 af/at/bt PoE. C-NIM-1X fits buyers matching 1G or 10G optical WAN. C-NIM-1M fits buyers needing copper mGig and PoE on the WAN module.
C-NIM-1X is a one-port routed WAN NIM with a non-oversubscribed 10G backplane path. C-NIM-4X is a four-port 1/10G SFP/SFP+ switch NIM with LAN/WAN MACsec and optional L3. C-NIM-1X fits a single routed 10G WAN handoff; C-NIM-4X fits four SFP+ LAN/WAN ports.
Cisco has not announced an end-of-sale date for C-NIM-1X. The module serves Catalyst 8300 models C8300-2N2S-4T2X, C8300-2N2S-6T, C8300-1N1S-4T2X and C8300-1N1S-6T. Cisco ends sales of C8300-2N2S-4T2X and C8300-2N2S-6T on 31 July 2027, with last support on 31 July 2032.
ORM offers C-NIM-1X new sealed and certified refurbished. Cisco Limited 1-Year Return To Factory Hardware Warranty applies to the Catalyst 8300/8200 edge platform family. ORM warranty is new — up to 3-year extended and certified refurbished — up to 1 year, with 30 days on every condition; terms apply.