Name:
Added to cart 28 times recently
In stock - Ready to Ship
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
C9124AXI-E
Cisco Catalyst 9124AXI Outdoor Access Point, Wi-Fi 6, 4x4:4S...
TRUSTED, TRIED, PROVEN
$5,000,000+
Inventory Delivered By
Officially Accredited
& Verified By
Next-Gen IT
Solutions Powered By
C9124AXI-E is a Cisco Catalyst 9124AXI outdoor Wi-Fi 6 access point for the -E Europe regulatory domain. It uses integrated omnidirectional antennas for 2.4 GHz and 5 GHz service, keeping the antenna system inside the IP66/IP67 outdoor enclosure rather than relying on external RF ports. The platform belongs to the Catalyst 9100 access point family and operates as a controller-managed outdoor AP with Cisco Catalyst 9800 Series wireless controllers. Dual-band IEEE 802.11ax radios serve outdoor client access, while an internal Bluetooth Low Energy and multiprotocol 802.15.4 IoT radio supports location and sensor-oriented wireless services. Four dual-band integrated antennas, an internal BLE antenna, and Catalyst software alignment make this SKU the internal-antenna 9124AX variant for European channel and transmit-power requirements. The outdoor enclosure and internal antenna layout reduce exposed RF connection points while preserving a fixed omnidirectional coverage profile for wide exterior cells.
5.38 Gbps of maximum PHY rate spans 160 MHz operation on 5 GHz with 20 MHz operation on 2.4 GHz. Each serving band uses 4x4:4SS uplink and downlink MU-MIMO for the C9124AXI model, and IEEE 802.11ax adds OFDMA, Target Wake Time, BSS coloring, packet aggregation, Dynamic Frequency Selection, and 802.11ax beamforming. C9124AXI-E also includes 2.5G mGig Ethernet for the PoE-in uplink, a Gigabit Ethernet SFP uplink option, a 10/100/1000BASE-T PoE-out downlink that is active only with sufficient input power, and an RJ-45 management console. Full radio and 2.5G operation requires 802.3bt, Cisco UPOE, or DC power; 802.3at reduces serving radios to 2x2 and 1G Ethernet, while 802.3af disables both serving radios. WPA, WPA2, WPA3, 802.1X, Secure Boot, image signing, and Cisco Trust Anchor technologies align the AP with Catalyst wireless security designs. The RF ASIC adds spectrum analysis, CleanAir, wireless intrusion prevention, FastLocate, and DFS functions for Catalyst-managed radio operations.
C9124AXI-E fits outdoor access layers that need controller-based policy, RF management, and weather-rated installation on walls, poles, ceilings, eaves, or cable strands. The internal omnidirectional antenna pattern suits courtyards, transportation platforms, open yards, exterior walkways, and campus edge areas where the AP serves clients from a fixed outdoor mount. Relay-node operation supports outdoor mesh paths for access points without a direct wired connection, while Cisco Catalyst Center and Cisco DNA workflows place the device inside centralized inventory, policy, assurance, and location operations. IP66/IP67 ingress protection, -40 to 65 C operation without solar loading, -40 to 55 C operation with solar loading, 0 to 100 percent condensing humidity tolerance, and documented wind resistance align the hardware with exposed wireless cells across distributed WLAN designs. Its 10.2 x 9.2 x 3.2 inch chassis and 2.9 kg weight inform bracket selection, grounding, and service-clearance planning.
C9124AXI-E price is is available on request. Get immediate quote.
Request bulk order quote for C9124AXI-E for additional pricing. Browse the full Cisco Catalyst 9100 Wifi 6 Access Point series or explore all Cisco products.
C9124AXI-E sits at the outdoor access layer for campuses, yards, courtyards, and exterior walkways that need dual-band Wi-Fi 6 under Catalyst controller policy. The AP terminates client access on 2.4 GHz and 5 GHz radios, uses internal omnidirectional antennas for broad local RF cells, and uplinks through 2.5G mGig Ethernet when adequate power is present. Central RF profiles, security policy, and monitoring keep outdoor WLAN behavior aligned with the indoor Catalyst environment, giving operations teams one managed access plane across exposed spaces.
C9124AXI-E operates as an outdoor relay node where every AP location does not have a direct wired connection. The internal omnidirectional antenna pattern supports shared outdoor cells, while Catalyst 9800 control maintains AP join, radio policy, and security configuration. Mesh planning accounts for country code, channel reuse, mounting height, power source, and backhaul path quality before activation. This role extends managed WLAN reach into hard-to-cable areas while keeping outdoor nodes visible inside the controller operational model and change process records.
Network teams place this AP on poles, walls, ceilings, eaves, or cable strands where the WLAN edge meets weather exposure. IP66/IP67 protection, wide operating temperature tolerance, grounding provisions, and outdoor-rated cabling support fixed installation in exposed cells. The 2.5G mGig uplink, SFP option, and PoE behavior table guide power and cabling decisions during design. The network gains predictable outdoor client coverage with documented environmental limits, verified regional operation, and a controller-managed path for monitoring and policy changes over time.
Stable outdoor Wi-Fi 6 performance with the internal omni antenna model our Catalyst design required.
The -E domain units matched our European rollout and joined the 9800 controller cleanly.
Good option for outdoor access where external antenna cabling was not needed.
Radio and Ethernet checks were completed before dispatch, which helped staging move faster.
Reliable APs for our controller-managed outdoor WLAN refresh.
Mount accessories needed separate planning, but the AP hardware performed as expected.
Refurbished units arrived clean, tested, and correctly identified as C9124AXI-E.
C9124AXI-E is a Cisco Catalyst 9124AXI outdoor Wi-Fi 6 access point with internal omnidirectional antennas and an -E Europe regulatory domain. It belongs to the Catalyst 9100 access point family and is designed for controller-managed outdoor wireless service using Cisco Catalyst 9800 Series Wireless Controllers.
The C9124AXI-E model number identifies a Cisco Catalyst 9124AX Series access point. The AX portion indicates Wi-Fi 6, I indicates the internal omnidirectional antenna version, and -E identifies the Europe regulatory domain. The SKU does not include EWC, so it is treated as a controller-managed AP.
Yes, C9124AXI-E is a wireless access point for outdoor WLAN access. It is not a switch, router, antenna accessory, or standalone license. The hardware integrates 2.4 GHz and 5 GHz serving radios, internal antennas, an IoT radio, Ethernet uplink options, and an outdoor-rated enclosure for controller-managed operation.
C9124AXI-E sits in the Cisco Catalyst 9124AX Series, within the broader Catalyst 9100 Wi-Fi 6 access point family. It is the internal omnidirectional outdoor model, positioned beside the C9124AXD directional version and the C9124AXE external-antenna version for different outdoor RF designs and controller-managed WLAN roles.
C9124AXI-E supports Wi-Fi 6 based on IEEE 802.11ax, while also supporting earlier 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac clients. Cisco lists 4x4:4SS uplink and downlink MU-MIMO for the C9124AXI model on both the 2.4 GHz and 5 GHz serving bands in outdoor WLAN operation today.
C9124AXI-E provides dual-band 2.4 GHz and 5 GHz wireless service. Cisco lists PHY data rates to 5.38 Gbps for 802.11ax when using 160 MHz operation on 5 GHz and 20 MHz operation on 2.4 GHz. The AP also supports 20, 40, 80, and 80+80 MHz channels.
C9124AXI-E uses internal omnidirectional antennas. Cisco lists 7 dBi peak gain for 2.4 GHz, 7 dBi peak gain for 5 GHz, and a 5 dBi internal BLE antenna. This distinguishes the C9124AXI model from the C9124AXD directional antenna model and the C9124AXE external antenna model.
C9124AXI-E includes one 100/1000/2500BASE-T mGig Ethernet uplink that also accepts PoE input, one Gigabit Ethernet SFP uplink option, one 10/100/1000BASE-T downlink port with conditional PoE output, and an RJ-45 management console port. The SFP and PoE-out behavior depends on the selected power source.
C9124AXI-E accepts 802.3af PoE, 802.3at PoE Plus, 802.3bt PoE, Cisco UPOE, supported Cisco power injectors, or 24 to 56 VDC input. Full radio and 2.5G operation requires 802.3bt, Cisco UPOE, or DC power. 802.3at reduces radios to 2x2 and 1G Ethernet service mode during use.
C9124AXI-E is managed through Cisco Catalyst 9800 Series Wireless Controllers for controller-based WLAN operation. Cisco lists IOS XE 17.6.2 or later for all regulatory domains on Catalyst 9124AXI and 9124AXD access points. Configuration, RF policy, security, and monitoring sit in the Catalyst wireless control plane.
C9124AXI-E is used in outdoor access layers where a Wi-Fi 6 AP needs integrated omnidirectional antennas, weather-rated hardware, and controller-based WLAN policy. Typical placements include exterior walkways, courtyards, yards, transit areas, and campus edge spaces that need dual-band wireless service from wall, pole, ceiling, or strand mounts.
Yes, Cisco describes the C9124AXI model as a standalone unit that can operate as a relay node for APs without a direct wired network connection. In practice, C9124AXI-E belongs in Catalyst 9800 managed designs where outdoor mesh behavior, wired uplink availability, regulatory domain, and RF planning are validated together.
C9124AXI-E fits outdoor areas that need Wi-Fi 6 capacity, 4x4:4SS radios, and omnidirectional RF coverage from a fixed AP location. The manufacturer does not publish a universal client-count limit for this SKU, so sizing should use RF planning, controller design, channel reuse, expected device mix, and site survey data.
Yes, C9124AXI-E is the -E regulatory domain version, which Cisco associates with Europe. The controller country code must match the physical deployment location, such as FR for France or ES for Spain. That configuration controls legal channels, transmit power, and country-specific radio behavior for the AP.
Cisco lists Cisco Catalyst 9800 Series Wireless Controllers as the supported WLAN controllers for the Catalyst 9124AX Series. For C9124AXI and C9124AXD access points across all regulatory domains, Cisco lists IOS XE Software Release 17.6.2 or later. Compatibility should be checked against the exact controller software release.
C9124AXI-E belongs to the Catalyst wireless platform that Cisco pairs with Cisco DNA Software. Cisco highlights Cisco Spaces, Cisco Identity Services Engine, Cisco DNA Analytics and Assurance, and SD-Access support for the Catalyst 9124AX Series. These integrations depend on the controller, licensing, and network design around the AP.
Cisco lists AIR-PWRINJ-60RGD1=, AIR-PWRINJ-60RGD2=, AIR-PWRINJ7=, and AIR-PWRINJ6= as supported power injectors for the Catalyst 9124AX Series outdoor AP. The 60W and 65W options are important when full AP function, SFP availability, mGig speed, or PoE-out operation is required by design in outdoor deployments and staging.
Cisco lists several orderable mounting options for C9124AXI deployments, including AIR-MNT-ART1= for wall, ceiling, or pole mounting, AIR-MNT-HORZ1= for horizontal wall or pole mounting, and AIR-MNT-STRAND1= for cable strand horizontal mounting. Mounting hardware is selected separately based on orientation, site structure, and installation clearance needs.
C9124AXI-E uses internal omnidirectional antennas with 7 dBi peak gain on 2.4 GHz and 5 GHz. C9124AXD-E is the internal directional antenna sibling, with 9 dBi peak gain and directional beamwidth characteristics. Both are outdoor Wi-Fi 6 Catalyst 9124AX models, but their antenna patterns serve different RF layouts.
C9124AXI-E has internal omnidirectional antennas and no external RF antenna ports. C9124AXE-E is the external-antenna sibling, with six antenna ports and support for Cisco external antenna options. Choose between them according to the required RF pattern, antenna placement plan, cable routing, and site approval requirements.
C9124AXI-E is the internal-antenna -E regulatory domain AP without the EWC SKU marker. C9124AXI-EWC-E is the embedded wireless controller version of the same outdoor internal-antenna family. The difference matters when deciding whether the deployment relies on a Catalyst 9800 controller or an embedded controller design.
C9124AXI-E and C9124AXI-A share the internal omnidirectional Catalyst 9124AXI hardware family, but the suffix identifies different regulatory domains. -E is associated with Europe, while -A is used for Americas domain deployments. Regulatory domains affect channels and transmit power, so they are not interchangeable across regions.
C9124AXI-E pricing depends on requested condition, quantity, sourcing channel, warranty term, and current Cisco Catalyst outdoor AP availability. ORM Systems provides a quote after checking new and refurbished stock options and confirming the required regulatory domain. Supplying the target quantity and destination helps produce a practical project price.
Yes, ORM Systems sources C9124AXI-E in new condition when channel availability supports the order. New units suit standardized outdoor WLAN projects, warranty-sensitive deployments, and refreshes that require current Cisco packaging. The quote should confirm the exact MPN, -E regulatory domain, condition, lead time, and warranty coverage.
Refurbished C9124AXI-E availability depends on tested stock and market supply at the time of quote. Refurbished units suit expansion, sparing, and like-for-like replacement across existing Catalyst 9124AXI outdoor deployments. ORM Systems should verify the exact Cisco PID, regulatory domain, radio operation, Ethernet interfaces, and physical condition before dispatch.
Lead time for C9124AXI-E varies by quantity, condition, destination, and current Cisco wireless stock availability. ORM Systems confirms timing during quoting after checking available new and refurbished supply. For urgent replacement or rollout work, provide required delivery dates, site country, controller version, and mounting or power accessory requirements.
ORM Systems supports bulk C9124AXI-E requests for multi-AP outdoor WLAN rollouts, spare pools, and controller-managed refresh projects. Bulk quoting should confirm matched -E regulatory domains, condition mix, warranty expectations, delivery phasing, and accessory requirements. Providing a bill of materials helps align AP quantities with mounts, power injectors, and controller licensing.
Warranty coverage for C9124AXI-E depends on the quoted condition, stock source, and commercial package. ORM Systems lists warranty terms on the quote and commonly supports new and refurbished Cisco hardware procurement with warranty options that reach up to three years. Confirm replacement expectations before purchase approval.
Refurbished C9124AXI-E units should be checked for exact PID identity, -E regulatory domain, radio operation, Ethernet ports, SFP uplink behavior, PoE input, console access, and physical enclosure condition. For outdoor APs, inspection should also cover weather seals, port covers, grounding hardware, and evidence of previous installation wear.
Cisco lists IP66/IP67 ingress protection, 0 to 100 percent condensing humidity tolerance, wind resistance, corrosion testing, solar radiation testing, and safety, EMC, radio, RF safety, IEEE, WMM, and security standards for the Catalyst 9124AX Series. C9124AXI-E also inherits the outdoor operating temperature range documented for C9124AXI.
C9124AXI-E joins a Cisco wireless controller through normal Catalyst AP discovery and CAPWAP operation. The network needs Layer 3 connectivity, DHCP or controller discovery, proper switchport configuration, and a compatible Catalyst 9800 controller software release. After join, WLANs, RF profiles, country code, security, and monitoring are configured centrally.
C9124AXI-E operates in a Catalyst wireless deployment where controller software, Cisco DNA licensing, and any required support subscriptions are handled separately from the AP hardware. Cisco lists IOS XE 17.6.2 or later for all regulatory domains. The exact license package depends on the controller architecture and feature set.
Plan the mounting kit, grounding materials, outdoor-rated shielded Ethernet cable, power source, optional power injector, and any SFP gland kit before deploying C9124AXI-E. Cisco ships the AP with ground lug hardware and a CAT 5e RJ45 termination plug, while mounting brackets and many installation accessories are ordered separately.
C9124AXI-E can be sourced through ORM Systems for UK-based Cisco wireless procurement when the required condition and stock are available. Buyers should request a quote with the exact SKU, quantity, destination, preferred warranty, and deployment context. ORM Systems verifies the Cisco PID and -E regulatory domain before quoting.
ORM Systems handles international C9124AXI-E enquiries subject to availability, export requirements, courier options, and destination rules. The -E regulatory domain must match the intended country of operation, so buyers should confirm the deployment country before ordering. Shipping options, lead time, and warranty coverage are confirmed during the quote process.
United States