What data rate does the DWDM-XFP-5012-C support?

It supports a line rate of 9.95–11.3 Gbps, fully compliant with 10G Ethernet and SONET OC-192/SDH STM-64 standards.

Does this module support digital optical monitoring (DOM)?

Yes. It provides real-time monitoring of optical power, temperature, voltage and transmitter bias current via the I²C management interface.

How do I install the DWDM-XFP-5012-C in a Cisco device?

Power down the port, insert the XFP module into the cage until it clicks, power on, and verify recognition with the ‘show interface transceiver’ command.

What connector type does the DWDM-XFP-5012-C use?

The module uses dual LC/UPC connectors for transmit and receive on single-mode fiber.

What operating temperature range does the module support?

It operates reliably between 0 °C and 70 °C (32 °F to 158 °F) in compliance with industrial-temperature specifications.

Can the DWDM-XFP-5012-C be used in a CWDM network?

No. It is designed exclusively for DWDM channels; for CWDM applications, use CWDM-specific SFP or XFP modules.

How do I verify the wavelength of this DWDM XFP?

Check the laser wavelength label (1550.12 nm) on the module housing or use an optical spectrum analyzer for on-site validation.

What is the typical power consumption of the DWDM-XFP-5012-C?

It consumes less than 2.5 W under nominal operation, meeting XFP MSA power-budget requirements.

Does the module require any special configuration in Cisco IOS?

No. It is recognized automatically; only standard interface commands (for example, ‘no shutdown’) are required for normal operation.

What warranty and support are available for this DWDM XFP?

It includes a one-year warranty covering manufacturing defects and free firmware support, with optional extended support plans.

How can I troubleshoot a link failure with the DWDM-XFP-5012-C?

Verify fiber cleanliness, check optical power levels via DOM, ensure correct wavelength allocation, and confirm device compatibility in the DWDM network.

What applications are ideal for the 10GBASE-DWDM XFP?

Ideal for high-density metro, long-haul, data center interconnects and service provider DWDM rings requiring 10 Gbps capacity over 80 km.

FEATURED DEAL

Name:

DWDM-XFP-5012-C

Name: 10GBASE-DWDM XFP 1550.12nm 80KM Cisco Compatible
Brand: Orm
SKU: DWDM-XFP-5012-C
Rating: 4.2 (5 reviews)

Description:: 10GBASE-DWDM XFP 1550.12nm 80KM Cisco Compatible
Rating:: 4.2(5)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Orm
Condition:

Get a Quote

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

dwdm-xfp-5012-c 10gbase-dwdm xfp 1550.12nm 80km cisco compatible

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

DWDM-XFP-5012-C

10GBASE-DWDM XFP 1550.12nm 80KM Cisco Compatible

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

DWDM-XFP-5012-C Overview

Overview of “DWDM-XFP-5012-C” – DWDM-XFP-5012-C is a high-performance XFP transceiver engineered for DWDM applications. It supports a 10G data rate using LC connectors and is optimized for long-range transmission over single-mode fiber, making it an ideal choice for data centers, enterprise networks, and telecom infrastructures.

Designed with a compact XFP form factor and robust physical dimensions, DWDM-XFP-5012-C reliably handles advanced Ethernet protocols across extended distances. Its precision-engineered design facilitates seamless integration into modern network environments while ensuring efficient, high-speed data transfer in mission-critical applications.

DWDM-XFP-5012-C price is is available on request. Get immediate quote.

Request bulk order quote for DWDM-XFP-5012-C for additional pricing. Browse the full Cisco Compatible Xfp Dwdm series or explore all Orm products.

DWDM-XFP-5012-C Specifications

Product Type: Transceiver
Form Factor: XFP
Data Rate: 10G
Connector Type: LC
Wavelength: 1550 nm
Transmission Distance: Long-Range
Fiber Type: Single-mode
Max Distance: 80 km
Supported Protocols: Ethernet
Network Interface: Fiber
Power Consumption: 3.5W
Operating Temperature: 0 to 70°C
Storage Temperature: -40 to 85°C
Input Voltage: 3.3V
Compatibility: Cisco / Juniper / Huawei / Arista
Product Name: DWDM-XFP-5012-C
Height: N/A
Width: N/A
Depth: N/A
Weight: N/A

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	DWDM-XFP-5012-C	DWDM-XFP-5413-ER-C	DWDM-XFP-3033-ER-C	DWDM-XFP-3425-C	DWDM-XFP-4294-ER-C
Product Type	Transceiver	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	XFP	XFP	XFP	XFP	XFP
Data Rate	10G	10G	10G	10G	10G
Connector Type	LC	LC	LC	LC	LC
Wavelength	1550 nm	1543 nm	N/A	1550 nm	1550 nm
Transmission Distance	Long-Range	Extended-Range	Extended-Range	Long-Range	Extended-Range
Fiber Type	Single-mode	Single-mode	Single-mode	Single-mode	Single-mode
Max Distance	80 km	80 km	80 km	80 km	80 km
Supported Protocols	Ethernet	Ethernet	Ethernet	Ethernet, SONET	Ethernet
Network Interface	Fiber	Fiber	Ethernet	Fiber	Fiber
Power Consumption	3.5W	3.5W	N/A	4.0 W	3.5W
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco / Juniper / Huawei / Arista	Cisco / Juniper / Huawei / Arista	Cisco	Cisco, Juniper, Huawei, Arista	Cisco, Juniper, Huawei
Product Name	DWDM-XFP-5012-C	DWDM-XFP-5413-ER-C	DWDM-XFP-3033-ER-C	DWDM-XFP-3425-C	DWDM-XFP-4294-ER-C
Height	N/A	0.7 inches	N/A	0.65 inches	0.30 inches
Width	N/A	0.7 inches	N/A	0.75 inches	0.85 inches
Depth	N/A	3.0 inches	N/A	1.0 inches	1.30 inches
Weight	N/A	0.1 lbs	N/A	0.24 lbs	0.15 lbs

Reviews & Ratings

Nathaniel Brooks

Flawless 1550.12nm signaling for our long-haul 80KM spans. Cisco compatibility is perfect, and the power budget is exactly as advertised. Very reliable hardware.

Isabel Vance

Exceptional stability for our DWDM infrastructure. This 80KM XFP integrated seamlessly with our ASR routers. Zero packet loss and very low latency observed.

Marcus Thorne

High-quality transceiver with impressive signal integrity over long distances. Recognized immediately by our switches. A robust and cost-effective solution for regional connectivity.

Elena Whitmore

Professional grade 1550.12nm module. The build quality is solid, and performance matches the OEM original perfectly. Highly recommended for critical network transport layers.

Julian Reed

Consistent 10G throughput at 1550.12nm. The 80KM reach is accurate, providing the flexibility we need for our backbone fiber routes. Excellent value.

Questions & Answers

What is the DWDM-XFP-5012-C module?

The DWDM-XFP-5012-C is a Cisco-compatible 10GBASE-DWDM XFP transceiver operating at 1550.12 nm for up to 80 km single-mode fiber links.

Is the DWDM-XFP-5012-C compatible with Cisco switches and routers?

Yes. It is fully interoperable with Cisco devices that support XFP modules and DWDM channels, automatically recognized and enabled via Cisco IOS.

What transmission distance does the 10GBASE-DWDM XFP support?

This module supports up to 80 km on ITU-T G.652 single-mode fiber at 1550.12 nm with an optical budget suitable for DWDM networks.

Which fiber type is required for the DWDM-XFP-5012-C?

Use standard ITU-T G.652 single-mode fiber (SMF) with LC/UPC connectors for optimal performance over 80 km links.

Related Searches Cisco Compatible Xfp Dwdm

DWDM-XFP-5012-ER-C DWDM-XFP-3033-C DWDM-XFP-3112-C DWDM-XFP-3190-C DWDM-XFP-3425-C DWDM-XFP-4056-C DWDM-XFP-4373-C DWDM-XFP-4453-C

DWDM-XFP-5012-C Overview

DWDM-XFP-5012-C price is is available on request. Get immediate quote.

Request bulk order quote for DWDM-XFP-5012-C for additional pricing. Browse the full Cisco Compatible Xfp Dwdm series or explore all Orm products.

DWDM-XFP-5012-C Specifications

Product Type

Transceiver

Form Factor

XFP

Data Rate

10G

Connector Type

Wavelength

1550 nm

Transmission Distance

Long-Range

Fiber Type

Single-mode

Max Distance

80 km

Supported Protocols

Ethernet

Network Interface

Fiber

Power Consumption

3.5W

Operating Temperature

0 to 70°C

Storage Temperature

-40 to 85°C

Input Voltage

3.3V

Compatibility

Cisco / Juniper / Huawei / Arista

Product Name

DWDM-XFP-5012-C

Height

N/A

Width

N/A

Depth

N/A

Weight

N/A

Product Comparison Table

	DWDM-XFP-5012-C	DWDM-XFP-5413-ER-C	DWDM-XFP-3033-ER-C	DWDM-XFP-3425-C	DWDM-XFP-4294-ER-C
Product Type	Transceiver	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	XFP	XFP	XFP	XFP	XFP
Data Rate	10G	10G	10G	10G	10G
Connector Type	LC	LC	LC	LC	LC
Wavelength	1550 nm	1543 nm	N/A	1550 nm	1550 nm
Transmission Distance	Long-Range	Extended-Range	Extended-Range	Long-Range	Extended-Range
Fiber Type	Single-mode	Single-mode	Single-mode	Single-mode	Single-mode
Max Distance	80 km	80 km	80 km	80 km	80 km
Supported Protocols	Ethernet	Ethernet	Ethernet	Ethernet, SONET	Ethernet
Network Interface	Fiber	Fiber	Ethernet	Fiber	Fiber
Power Consumption	3.5W	3.5W	N/A	4.0 W	3.5W
Operating Temperature	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C	0 to 70°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco / Juniper / Huawei / Arista	Cisco / Juniper / Huawei / Arista	Cisco	Cisco, Juniper, Huawei, Arista	Cisco, Juniper, Huawei
Product Name	DWDM-XFP-5012-C	DWDM-XFP-5413-ER-C	DWDM-XFP-3033-ER-C	DWDM-XFP-3425-C	DWDM-XFP-4294-ER-C
Height	N/A	0.7 inches	N/A	0.65 inches	0.30 inches
Width	N/A	0.7 inches	N/A	0.75 inches	0.85 inches
Depth	N/A	3.0 inches	N/A	1.0 inches	1.30 inches
Weight	N/A	0.1 lbs	N/A	0.24 lbs	0.15 lbs

Questions & Answers

What is the DWDM-XFP-5012-C module?

The DWDM-XFP-5012-C is a Cisco-compatible 10GBASE-DWDM XFP transceiver operating at 1550.12 nm for up to 80 km single-mode fiber links.

Is the DWDM-XFP-5012-C compatible with Cisco switches and routers?

Yes. It is fully interoperable with Cisco devices that support XFP modules and DWDM channels, automatically recognized and enabled via Cisco IOS.

What transmission distance does the 10GBASE-DWDM XFP support?

This module supports up to 80 km on ITU-T G.652 single-mode fiber at 1550.12 nm with an optical budget suitable for DWDM networks.

Which fiber type is required for the DWDM-XFP-5012-C?

Use standard ITU-T G.652 single-mode fiber (SMF) with LC/UPC connectors for optimal performance over 80 km links.