HPE Server 2.5" Hard Drives

A

HPE Server 2.5\

A

HPE Server 2.5\

A

SAS 2.5\

A

Yes, HPE Server 2.5\

A

Slide the pre-configured HPE drive into an available 2.5\

A

HPE Server 2.5\

A

Select NVMe for maximum IOPS and low latency, SAS for balanced performance and reliability, and SATA for high capacity at lower cost based on your workload requirements.

A

You can physically install mixed SAS and SATA drives in the same server, but HPE recommends using uniform drive types per array to maintain consistent performance and manageability.

A

15K RPM HPE 2.5\

A

Yes, HPE Server 2.5\

A

Use the HPE Service Pack for ProLiant (SPP) or HPE Smart Storage Administrator to automatically detect and apply the latest drive firmware in your server.

A

Monitor drive health and performance using HPE iLO, HPE OneView and HPE Smart Storage Administrator with integrated alerts, S.M.A.R.T. reporting and predictive failure analysis.

A

Enterprise SAS HDDs operate from 5 °C to 55 °C (41 °F to 131 °F), while HPE SSDs support –20 °C to 70 °C (–4 °F to 158 °F); refer to the product datasheet for exact specifications.

A

Check HPE iLO or OneView event logs, run built-in diagnostics via Smart Storage Administrator, reseat the drive and replace any drive reporting predictive failure indicators.

A

Third-party 2.5\

A

HPE Smart Array controllers support RAID 0, 1, 5, 6, 10, 50 and 60 configurations with 2.5\

A

Yes, HPE 2.5\