Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
MR56-HW
Cisco Meraki MR56 Indoor Access Point, Wi-Fi 6, 5.38Gbps, 8x...
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
MR56-HW is a Cisco Meraki MR56 indoor Wi-Fi 6 access point built for cloud-managed high-density WLAN cells. The model uses dual client-serving radios with a 2.4 GHz IEEE 802.11b/g/n/ax radio and a 5 GHz IEEE 802.11a/n/ac/ax radio, plus a dedicated dual-band WIDS/WIPS, spectrum-analysis, and location-analytics radio. Internal antennas keep the unit self-contained, with 5.4 dBi gain at 2.4 GHz and 6 dBi gain at 5 GHz. Meraki Dashboard provides the management plane for configuration, monitoring, RF optimization, firmware handling, analytics, and policy control. The indoor design fits enterprise ceiling, wall, desktop, and junction-box placements where a single cloud-managed AP serves dense client areas without external antenna planning. Country-specific channel and transmit-power behavior remains controlled by the Meraki operating region and local regulatory settings.
5.38 Gbps of aggregate radio frame rate spans 4,804 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, subject to radio chipset limits. 8x8:8SS operation on 5 GHz and 4x4:4SS operation on 2.4 GHz give the access point a high-capacity client-serving layout for IEEE 802.11ax deployments. MU-MIMO, SU-MIMO, DL-OFDMA, UL-OFDMA, transmit beamforming, target wake time, and BSS coloring align the radios with Wi-Fi 6 efficiency features. MR56-HW uses one 100/1000/2.5G/5G BASE-T RJ-45 uplink for wired connectivity and accepts 802.3at Power over Ethernet. A 12 V DC input provides an alternate power path, while the published 30 W maximum draw ties full operation to the 802.3at power budget. Bluetooth Low Energy beaconing and scanning add location-aware telemetry alongside the dedicated RF security radio. WMM, DSCP, 802.1p, and Layer 7 traffic shaping give administrators policy tools for voice, video, guest, and application-aware WLAN behavior.
MR56-HW sits at the wireless access layer for dense indoor rooms, open-plan offices, meeting areas, and other controlled spaces that need cloud-managed client access. Ceiling tile rail, solid-ceiling, wall, desktop, and electrical junction box installs use the included mount cradle, drop-ceiling kit, wall screws, wall anchors, and security screws. Gateway AP operation requires routable addressing through DHCP reservations or static configuration, and Meraki Dashboard enrollment requires a Meraki access point license. Security functions include real-time WIDS/WIPS, Air Marshal rogue AP containment, 802.1X authentication, WPA2, WPA3, Enhanced Open, VLAN tagging, IPsec tunneling, and Layer 7 firewall policy. The device also participates in Meraki mesh designs where placement provides line of sight to other Meraki access points, creating a managed indoor cell with radio, security, analytics, and policy functions in one appliance. Operating limits of 0 C to 40 C and 5 to 95 percent non-condensing humidity align the unit with climate-controlled indoor network spaces.
MR56-HW price is is available on request. Get immediate quote.
Request bulk order quote for MR56-HW for additional pricing. Browse the full Cisco Meraki Access Points series or explore all Cisco products.
MR56-HW operates as the access-layer radio for dense indoor cells where many managed clients share 2.4 GHz and 5 GHz spectrum. The 8x8:8 5 GHz radio anchors primary client capacity, while the 4x4:4 2.4 GHz radio keeps legacy and IoT-adjacent clients on a separate band. A 5G multigigabit uplink connects the AP to the switching layer, and 802.3at PoE keeps power design standard across ceiling-mounted locations. Meraki mesh remains available for nonwired locations when RF design permits. The cell gains predictable Wi-Fi 6 capacity with centralized Dashboard policy.
MR56-HW fits branch WLAN designs where local switching provides 802.3at power and Meraki Dashboard provides remote configuration, monitoring, firmware control, and RF tuning. The access point joins a Dashboard network through its serial number, then applies SSID, VLAN, authentication, traffic shaping, and guest access policy from the cloud. Static IP assignment through the local status page gives network teams deterministic uplink addressing. Role-based administration keeps configuration changes auditable across sites. The branch gains managed indoor wireless without a local wireless controller.
The access point places client access and RF security into separate radio functions inside the same indoor cell. Dual client-serving radios carry 2.4 GHz and 5 GHz traffic, while the dedicated dual-band WIDS/WIPS and spectrum-analysis radio monitors the airspace for interference, rogue AP behavior, and location analytics. Bluetooth Low Energy scanning adds beacon and device visibility data for Dashboard reporting. This layout keeps RF monitoring active during production service and gives operations teams a clearer security and troubleshooting plane.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| MR56-HW |  MR76-HW |  MR36-HW |  MR46E-HW |  MR44-HW | |
|---|---|---|---|---|---|
| Product Type | Wireless Access Point / Indoor Access Point / Mesh Access Point | Wireless Access Point / Outdoor Access Point / Industrial Access Point / Mesh Access Point | Wireless Access Point / Indoor Access Point | Wireless Access Point / Indoor Access Point / Mesh Access Point | Wireless Access Point / Indoor Access Point |
| Wireless Type | Access Point | Access Point | Access Point | Access Point | Access Point |
| Wi-Fi Standard | Wi-Fi 6 | Wi-Fi 6 | Wi-Fi 6 | Wi-Fi 6 | Wi-Fi 6 |
| Frequency Bands | Dual-Band | Dual-Band | Dual-Band | Dual-Band | Dual-Band |
| Data Rate | 5.38 Gbps aggregate; 4,804 Mbps 5 GHz; 574 Mbps 2.4 GHz | 1.5 Gbps aggregate; 1,201 Mbps 5 GHz; 286 Mbps 2.4 GHz | 1.5 Gbps aggregate; 1,201 Mbps 5 GHz; 286 Mbps 2.4 GHz | 2.98 Gbps aggregate; 2,402 Mbps 5 GHz; 574 Mbps 2.4 GHz | 2.7 Gbps aggregate; 3.0 Gbps chipset |
| Connector Type | RJ-45 | RJ-45 / N-Type | RJ-45 | RJ-45 / RP-TNC | RJ-45 |
| Antenna Type | Internal | External | Internal / Omnidirectional | External / Omnidirectional / Directional / Patch / Dipole | Internal / Omnidirectional |
| Antenna Gain | 5.4 dBi 2.4 GHz; 6 dBi 5 GHz | Antenna dependent | 5.4 dBi 2.4 GHz; 6 dBi 5 GHz | 3.8-11.2 dBi 2.4 GHz; 3.7-10.8 dBi 5 GHz | 5.1 dBi 2.4 GHz; 5.9 dBi 5 GHz |
| MIMO Technology | MU-MIMO | MU-MIMO | MU-MIMO | MU-MIMO | MU-MIMO |
| Beamforming | Beamforming Supported | Beamforming Supported | Beamforming Supported | Beamforming Supported | Beamforming Supported |
| Mounting Options | Ceiling Mount / Wall Mount / Desk Mount | Ceiling Mount / Wall Mount / Pole Mount | Ceiling Mount / Wall Mount / Desk Mount | Ceiling Mount / Wall Mount / Desk Mount | Ceiling Mount / Wall Mount / Desk Mount |
| Power Supply | PoE Plus / AC Adapter / DC | PoE | PoE / DC | PoE Plus / DC | PoE Plus / PoE / DC |
| Ethernet Port | 1 x 100M/1G/2.5G/5G BASE-T RJ-45 | 1 x 10/100/1000 BASE-T RJ-45 | 1 x 10/100/1000 BASE-T RJ-45 | 1 x 100M-2.5G RJ-45 | 1 x 100/1000/2.5G BASE-T RJ-45 |
| Management Features | Cloud Dashboard | Cloud Dashboard | Cloud Dashboard | Cloud Dashboard | Cloud Dashboard |
| Security Features | WPA / WPA2 / WPA3 / 802.1X / Enhanced Open | WPA / WPA2 / WPA3 / 802.1X / Enhanced Open | WPA / WPA2 / WPA3 / 802.1X / Enhanced Open | WPA / WPA2 / WPA3 / 802.1X / Enhanced Open | WPA / WPA2 / WPA3 / 802.1X / Enhanced Open |
| Compliance | Safety: CSA, CB 60950, CB 62368, UL 2043 / EMC: FCC Part 15B, ICES-003 / Radio: FCC Part 15C, 15E, RSS-247 | IEEE: 802.11a/b/g/n/ac/ax/e/h/i/k/r/u; Safety: CSA, UL 2043; Radio: FCC, EN, AS/NZS, IFT; RoHS | Safety: UL 2043; CSA/CB 60950/62368 / EMC: FCC 15B; ICES-003 / Radio: FCC 15C; FCC 15E / Environmental: RoHS | Safety: CSA CB 60950 62368; UL 2043 / EMC: EN 61000 / Radio: EN 300 328; EN 301 893 | Safety: CSA/CB 60950 and 62368; UL 2043 / EMC: FCC 15B; ICES-003 / Radio: FCC 15C; FCC 15E / Environmental: RoHS |
| Product Name | Meraki MR56 Cloud Managed 802.11ax AP | Meraki MR76 Cloud Managed 802.11ax AP | Meraki MR36 Cloud Managed 802.11ax AP | Meraki MR46E Cloud Managed 802.11ax AP | Meraki MR44 Cloud Managed 802.11ax AP |
| Height | 1.76 in | 2.16 in | 1.42 in | 1.39 in | 1.74 in |
| Width | 5.54 in | 6.02 in | 4.72 in | 6.15 in | 5.06 in |
| Depth | 12.83 in | 11.81 in | 9.84 in | 12.05 in | 12.05 in |
| Weight | 1 kg | 1.34 kg | 0.49 kg (492 g) | 0.85 kg | 0.739 kg (739 g) |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Stable Meraki Wi-Fi 6 performance with straightforward Dashboard deployment across dense office areas.
The 5G uplink and 8x8 5 GHz radio worked well for our access-layer refresh.
Good refurbished unit condition, clean reset, and reliable Meraki cloud onboarding.
MR56-HW kept our Wi-Fi 6 standardization plan consistent across several indoor zones.
Installation hardware was complete and the access point joined Dashboard without issues.
Lead time was longer than expected, but the APs performed correctly after staging.
Solid option for extending an existing Meraki MR56 deployment with verified hardware.
MR56-HW is a Cisco Meraki MR56 cloud-managed indoor wireless access point. It is a Wi-Fi 6 access point with dual client-serving radios, internal antennas, a dedicated WIDS/WIPS and spectrum analysis radio, and a Bluetooth Low Energy radio for beaconing and scanning. It is managed through Meraki Dashboard and requires a Meraki AP license.
MR56-HW identifies the hardware SKU for the Meraki MR56 Cloud Managed 802.11ax AP. The SKU does not include a separate regulatory-domain suffix, so country-specific wireless restrictions are handled by Meraki regional operation and configuration rules rather than a visible -A, -E, or -UX suffix. The hardware is the indoor MR56 access point.
Yes, MR56-HW is an indoor access point. Cisco Meraki lists the MR56 warranty category as an indoor access point and specifies an operating temperature range of 32 F to 104 F, or 0 C to 40 C. The unit is intended for controlled indoor WLAN deployments, not outdoor pole or enclosure installations.
MR56-HW sits in the high-capacity Wi-Fi 6 tier of the Meraki MR indoor access point family. It has 8x8:8 operation on 5 GHz and 4x4:4 operation on 2.4 GHz, which places it above lower-stream MR36, MR44, and MR46 models for dense client access and higher aggregate radio throughput.
MR56-HW supports IEEE 802.11ax, marketed as Wi-Fi 6, while also covering earlier 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac client modes. The access point includes Wi-Fi 6 functions such as OFDMA, target wake time, BSS coloring, MU-MIMO, and 1024-QAM across both 2.4 GHz and 5 GHz bands.
MR56-HW uses dual client access bands: 2.4 GHz and 5 GHz. Cisco Meraki lists 2.401 to 2.484 GHz for the 2.4 GHz radio and multiple 5 GHz UNII ranges, subject to country-specific restrictions. The access point also includes a dual-band WIDS/WIPS radio and a 2.4 GHz BLE radio.
MR56-HW provides a 5.38 Gbps aggregate radio frame rate under Cisco Meraki specifications. The 5 GHz radio reaches 4,804 Mbps and the 2.4 GHz radio reaches 574 Mbps. These values describe maximum over-the-air radio chipset frame rates, so practical client throughput depends on channel width, clients, RF conditions, and configuration.
MR56-HW requires 802.3at Power over Ethernet for the documented 30 W maximum power budget. Cisco Meraki also lists an alternative 12 V DC input, with the Meraki AC adapter and PoE injector sold separately. An 802.3at-capable PoE switch or suitable Meraki injector is the normal access-layer power source.
MR56-HW has one 100/1000/2.5G/5G BASE-T Ethernet RJ-45 port. The port is labeled Eth0, PoE and is used for uplink to the upstream wired network while also accepting 802.3at power. This multigigabit uplink helps prevent the wired side from constraining the AP radio aggregate rate.
MR56-HW is managed through Meraki Dashboard and the Meraki cloud. The dashboard handles network enrollment, configuration, firmware handling, RF optimization, monitoring, alerting, traffic analytics, and security policy. Initial local access through my.meraki.com or 10.128.128.128 is used for uplink configuration tasks such as static IP settings.
MR56-HW is used for dense indoor WLAN access where a cloud-managed Wi-Fi 6 AP sits at the access layer. Common technical placements include office floors, meeting spaces, branch sites, shared work areas, and high-client rooms. The 5G multigigabit uplink, internal antennas, and Meraki cloud management suit managed multi-AP wireless designs.
Yes, MR56-HW is built for high-density indoor wireless cells. Its 8x8:8 5 GHz radio, 4x4:4 2.4 GHz radio, MU-MIMO, OFDMA, and dedicated RF security radio allow the AP to serve many clients while keeping scanning and WIDS/WIPS functions separate from client access traffic under planned channel and power settings.
MR56-HW supports Meraki mesh deployment when the AP placement has line of sight to other Meraki devices and the network is configured for that role. Mesh operation is useful where Ethernet is unavailable at a specific indoor AP location, although a wired gateway AP remains the cleaner design for predictable backhaul capacity.
Yes, MR56-HW includes a dedicated dual-band WIDS/WIPS, spectrum analysis, and location analytics radio, plus a separate Bluetooth Low Energy radio for beacon and BLE scanning functions. This hardware layout keeps RF monitoring, Air Marshal security behavior, and location telemetry active alongside the two client-serving Wi-Fi radios.
MR56-HW requires a Meraki access point license to operate in a Meraki Dashboard network. The license is separate from the hardware SKU and should match the intended Meraki organization, network, and license model. Without proper licensing, the AP cannot be used as a fully managed Meraki cloud access point.
MR56-HW is compatible with Meraki Dashboard and Meraki cloud management. It is not a traditional controller-based Aironet AP and is not managed by AireOS or Catalyst 9800 wireless controllers. Network administrators add the AP to a Meraki Dashboard network using the order number or the device serial number.
Cisco Meraki lists MA-PWR-30W-XX as the Meraki AC adapter for MR Series access points and MA-INJ-4 as the MR 802.3at PoE injector. MA-INJ-6 is also listed as a Meraki multigigabit 802.3bt injector. Power cords, injectors, and adapters must be matched to the deployment country and power design.
MR56-HW supports WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3-Personal, WPA3-Enterprise, and WPA3 Enhanced Open where firmware enables the relevant features. The AP also supports EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM, AES encryption, VLAN tagging, IPsec tunneling, Air Marshal WIDS/WIPS, and Layer 7 firewall policy for managed WLAN segmentation.
MR56-HW and MR46-HW are both Meraki Wi-Fi 6 indoor access points with 802.3at power and multigigabit Ethernet. The key difference is radio scale: MR56-HW uses 8x8 MIMO with eight spatial streams on 5 GHz, while MR46-HW uses 4x4 MIMO with four spatial streams. MR56-HW fits denser access cells.
MR56-HW is the higher radio-capacity model compared with MR44-HW. Cisco Meraki lists MR56-HW with an 8x8:8 5 GHz radio and a 5G multigigabit Ethernet uplink, while MR44-HW uses a lower-stream 5 GHz design and a 2.5G multigigabit Ethernet uplink. The difference matters in dense Wi-Fi 6 access designs.
MR56-HW targets higher-density wireless access than MR36-HW. Cisco Meraki comparison data places MR36 at 2x2 MIMO with two spatial streams, while MR56-HW provides 8x8 MIMO on 5 GHz and 4x4 MIMO on 2.4 GHz. MR36-HW suits smaller cells, while MR56-HW fits heavier indoor client loads.
MR56-HW is a dual-band Wi-Fi 6 access point, while MR57-HW is the newer Wi-Fi 6E model with 2.4 GHz, 5 GHz, and 6 GHz operation. MR57-HW also adds dual 5G multigigabit Ethernet ports and higher aggregate radio capacity. MR56-HW remains relevant for Wi-Fi 6 indoor networks without 6 GHz requirements.
MR56-HW pricing depends on requested condition, quantity, regional sourcing, license requirements, and current market availability. ORM Systems quotes the Cisco Meraki MR56 hardware after checking new and refurbished channels and confirming any accessory or license needs. Share the target quantity, destination, and required condition to receive an accurate price.
Yes, ORM Systems can quote MR56-HW in new condition when channel inventory is available. Cisco Meraki lists MR56-HW as an end-of-sale product with an August 7, 2025 end-of-sale date, so new hardware availability depends on remaining stock and distribution access. Refurbished units are often considered for lifecycle continuity.
Refurbished MR56-HW may be available through ORM Systems depending on current tested stock and project quantity. Refurbished hardware is most useful for expanding an existing Meraki MR56 deployment, replacing failed units, or keeping a standardized Wi-Fi 6 estate active. Condition, warranty, serial verification, and licensing requirements should be confirmed before quoting.
Lead time for MR56-HW depends on condition, requested quantity, accessory needs, license requirements, and supply at the time of quote. Because Cisco Meraki has already published the MR56-HW end-of-sale date, sourcing may involve remaining new inventory or refurbished stock. ORM Systems confirms realistic timing before accepting a purchase order.
ORM Systems supports bulk MR56-HW quotes for multi-AP rollouts, spare pools, and lifecycle extension projects. Quantity pricing depends on available stock, condition mix, warranty terms, and shipment destination. Providing the deployment count, required accessories, preferred condition, and target schedule helps align the quote with the technical and commercial plan.
Warranty terms for MR56-HW depend on the quoted condition and sourcing route. Cisco Meraki lists lifetime hardware warranty with advanced replacement for the MR56 platform, while ORM Systems states warranty coverage on each quote for new or refurbished supply. Buyers should confirm coverage length, replacement process, and license handling before approval.
Refurbished MR56-HW units should be checked for correct Cisco Meraki PID identity, clean serial reporting, factory reset status, radio operation, BLE scanning behavior, Ethernet link negotiation, 802.3at power operation, LED status, and mounting condition. ORM Systems can confirm the specific testing and warranty scope tied to the quoted refurbished stock.
MR56-HW aligns with IEEE 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u. Cisco Meraki also lists CSA and CB 60950 and 62368 safety approvals, UL 2043 plenum conformity, radio approvals, EMI approvals, exposure approvals, and RoHS for regulated enterprise deployments.
MR56-HW is first added to a Meraki Dashboard network using the Meraki order number or the device serial number. The AP then needs wired Internet access, suitable PoE or DC power, and correct upstream firewall access to Meraki cloud services. Static IP settings can be entered through the local status page when needed.
The MR56-HW package includes the MR56 cloud-managed access point, a mount cradle with built-in level tool, a drop ceiling mount kit, wall screws, wall screw anchors, and security screws. Cisco Meraki lists the PoE injector and DC adapter separately, so power accessories should be ordered only when the access switch does not provide suitable 802.3at PoE.
MR56-HW setup uses Meraki Dashboard for network enrollment and configuration, while the local status page supports uplink troubleshooting and static IP assignment. Installers typically need Ethernet cabling, an 802.3at PoE source or approved power accessory, a T8 Torx screwdriver, a Phillips screwdriver, and standard mounting tools for the selected ceiling or wall position.
MR56-HW can be purchased in the UK through ORM Systems, subject to current new or refurbished availability. The buyer should request a quote with quantity, preferred condition, destination, license needs, and any Meraki power accessories. ORM Systems then confirms pricing, warranty, lead time, and whether the order suits a replacement or expansion project.
ORM Systems handles international MR56-HW requests based on destination, export requirements, condition, and stock position. Buyers should provide the delivery country, quantity, preferred condition, and required accessories before quote review. Wireless products should also be checked against local regulatory and Meraki Dashboard region requirements before shipment and deployment.
United States
