Name: Cisco Catalyst 9300 Power Supply 715W AC Hot-Plug 80 Plus Platinum
Brand: Cisco
SKU: PWR-C1-715WAC-P
Rating: 4.7 (7 reviews)

Question 1

What is PWR-C1-715WAC-P?

Accepted Answer

PWR-C1-715WAC-P is a Cisco Catalyst 9300-family switch power supply module. Cisco identifies it as a 715 W AC Platinum-certified module for C9300 Series, C9300L Series, and C9300X Series switches. It belongs in the switch power-supply bay and should be matched to Cisco's supported chassis and power-budget tables before purchase.

Question 2

What does the PWR-C1-715WAC-P model number identify?

Accepted Answer

The model number identifies a Cisco C1-family AC power supply with 715 W maximum rated output and a Platinum-rated design. The suffix P distinguishes it from the non-Platinum 715 W AC supply. The exact SKU should be preserved during quoting, receiving, and asset tracking because related Cisco power modules use similar part numbers.

Question 3

Which switch families support PWR-C1-715WAC-P?

Accepted Answer

Cisco lists this module for C9300 Series Switches, C9300L Series Switches, and C9300X Series Switches. Compatibility should still be checked against the exact switch model, installed power configuration, and PoE requirements. That review is important because Catalyst 9300-family platforms use several C1 supplies with different wattage levels and input types.

Question 4

Where does PWR-C1-715WAC-P sit in the Cisco Catalyst 9300 power supply family?

Accepted Answer

It sits in the C1 power-supply family for Catalyst 9300 platforms as the 715 W AC Platinum option. Cisco also lists lower and higher wattage alternatives in the same family. That makes the SKU useful when a site needs more capacity than the 350 W AC module but does not require the 1100 W AC module.

Question 5

What is the wattage of PWR-C1-715WAC-P?

Accepted Answer

Cisco's power specifications list the module with 715 W maximum rated output. The data sheet also lists 2440 BTU/hr as the total output value for this supply. Buyers should compare that wattage with the switch model, PoE load, redundancy target, and second power-supply slot plan before ordering a replacement or spare.

Question 6

What AC input range does PWR-C1-715WAC-P use?

Accepted Answer

PWR-C1-715WAC-P uses 100 to 240 VAC autoranging input with a 47 to 63 Hz frequency range. Cisco lists input current at 10-5A for the 715 W AC Platinum supply. That range supports common AC power environments, but the facility cord, receptacle, and branch-circuit plan still need local verification.

Question 7

What output voltage does PWR-C1-715WAC-P provide?

Accepted Answer

Cisco lists the output rating as -56VDC at 12.8A for this 715 W AC Platinum module. That output feeds the supported Catalyst switch power bus through the internal power-supply bay. The value should be used as a specification reference, not as a reason to install the module in unsupported equipment.

Question 8

Is PWR-C1-715WAC-P hot-swappable?

Accepted Answer

Cisco describes Catalyst 9300 C1 power supplies as hot-swappable. Replacement still depends on the live switch configuration, available power, and StackPower or power-sharing state. Sites running full PoE+ loads should follow Cisco's replacement guidance carefully, because removing a supply without enough remaining power changes the operating power budget.

Question 9

Is PWR-C1-715WAC-P a Platinum-rated supply?

Accepted Answer

Yes. Cisco identifies the module as a Platinum-certified or Platinum-rated 715 W AC power supply for Catalyst 9300-family switches. The Platinum designation separates it from the non-Platinum 715 W AC module. Exact efficiency percentages are not provided in the cited Cisco tables, so numeric efficiency claims should not be added.

Question 10

What connector does PWR-C1-715WAC-P use?

Accepted Answer

Cisco's data sheet lists an IEC 320-C16 input receptacle for the 715 W AC Platinum supply. The same table lists a 15A power-cord rating. Buyers should align the cord, power strip, and facility receptacle with that input path, especially when replacing an existing supply in a crowded access closet.

Question 11

What is PWR-C1-715WAC-P used for?

Accepted Answer

The module is used to power supported Cisco Catalyst 9300-family switches from AC power. It fits internal C1 power-supply bays and supports replacement, spare inventory, and second-slot population plans. It should not be treated as a router, server, cable, adapter, transceiver, firewall, storage, memory, or wireless product.

Question 12

What type of network environment fits PWR-C1-715WAC-P?

Accepted Answer

PWR-C1-715WAC-P fits enterprise access-switch environments using Cisco Catalyst 9300-family platforms. Typical use includes wiring closets, branch access rooms, campus access layers, and spare pools for field replacement. Selection should follow the exact switch model and power budget rather than a generic wattage match, because Cisco maps power supplies by platform family.

Question 13

How does PWR-C1-715WAC-P support PoE planning?

Accepted Answer

Cisco lists this module as a default supply for several Catalyst 9300 PoE models and provides PoE availability tables by switch type. The 715 W value helps engineers calculate the available budget for connected endpoints. The final plan should account for the switch model, endpoint draw, StackPower behavior, and any second power supply.

Question 14

Does PWR-C1-715WAC-P work in StackPower deployments?

Accepted Answer

Cisco documentation explains that Catalyst 9300 switches may receive power through StackPower from another stack member when local supply conditions require it. Hot-swap guidance still depends on total available power and installed load. The SKU belongs in the supported chassis family, while StackPower behavior should be reviewed against the live stack design.

Question 15

Is PWR-C1-715WAC-P compatible with C9300 Series Switches?

Accepted Answer

Yes. Cisco lists the 715 W AC Platinum-certified module under the C9300 Series Switch power-supply table. Several C9300 models also show this PID as a default supply in product overview tables. Buyers should still match the exact switch model and PoE target before replacing or adding a power supply.

Question 16

Is PWR-C1-715WAC-P compatible with C9300L Series Switches?

Accepted Answer

Yes. Cisco lists the module for C9300L Series Switches and shows it as a default supply for several C9300L PoE models. The module should be checked against the exact C9300L model and slot plan. Related C9300L switches may use different default supplies depending on port count and PoE design.

Question 17

Is PWR-C1-715WAC-P compatible with C9300X Series Switches?

Accepted Answer

Yes. Cisco lists this 715 W AC Platinum-certified module under the C9300X Series Switch power-supply table. Product overview tables also show it as a default supply for selected C9300X models. Compatibility review should include the exact model, installed options, and power plan before purchase or field replacement.

Question 18

What power cord planning applies to PWR-C1-715WAC-P?

Accepted Answer

Cisco lists a 15A power-cord rating and an IEC 320-C16 input receptacle for the 715 W AC Platinum supply. The AC input range is 100 to 240 VAC. A purchasing or staging team should verify the local outlet standard and cord option before deployment, especially across multi-region spare pools.

Question 19

How does PWR-C1-715WAC-P compare with PWR-C1-350WAC-P?

Accepted Answer

PWR-C1-715WAC-P provides 715 W maximum rated output, while PWR-C1-350WAC-P is the 350 W AC Platinum-certified option in the same Cisco C1 family. Both are AC Platinum supplies for Catalyst 9300-family switches. The correct choice depends on the switch model, PoE budget, redundancy target, and Cisco's supported power matrix.

Question 20

How does PWR-C1-715WAC-P compare with PWR-C1-1100WAC-P?

Accepted Answer

PWR-C1-715WAC-P is the 715 W AC Platinum module, while PWR-C1-1100WAC-P is the 1100 W AC Platinum module. The 1100 W option supports higher power requirements where Cisco lists it for the target model. The 715 W option remains appropriate when the verified switch and PoE budget match Cisco's table.

Question 21

How does PWR-C1-715WAC-P compare with PWR-C1-715WAC?

Accepted Answer

PWR-C1-715WAC-P is the Platinum-rated 715 W AC version, while PWR-C1-715WAC is the non-Platinum 715 W AC version listed in Cisco power-supply tables. Both share the same wattage class, but the P suffix identifies the Platinum variant. Buyers should keep the full SKU intact to avoid substitution mistakes.

Question 22

How does PWR-C1-715WAC-P compare with PWR-C1-715WDC?

Accepted Answer

PWR-C1-715WAC-P is an AC input module with 100 to 240 VAC autoranging input. PWR-C1-715WDC is the 715 W DC option listed in Cisco's C1 power-supply family. The two are not interchangeable for sites that require a specific facility power type, so the input environment should drive selection.

Question 23

Is PWR-C1-715WAC-P available from ORM Systems?

Accepted Answer

ORM Systems supplies this power supply for B2B purchasing in new and certified refurbished condition when available for the requested quote. Availability should be confirmed at the time of inquiry because stock levels change. The exact SKU, target switch family, quantity, and condition preference should be included in the request.

Question 24

How should buyers request pricing for PWR-C1-715WAC-P?

Accepted Answer

Buyers should request pricing with the exact SKU, desired quantity, condition preference, and destination details for quoting. The request should also include the target Catalyst 9300-family switch when compatibility assistance is needed. Pricing should not be assumed from older listings because market supply and condition affect each quote.

Question 25

Is refurbished PWR-C1-715WAC-P suitable for replacement stock?

Accepted Answer

A refurbished unit is suitable for replacement stock only when the seller verifies the part number, physical condition, connector condition, fan operation, and electrical output under load. ORM Systems positions certified refurbished units for cost-conscious B2B replacement planning. Buyers should confirm condition grade and any applicable test details on the quote.

Question 26

Can PWR-C1-715WAC-P be ordered in bulk?

Accepted Answer

Bulk purchasing should be handled through a quote request that lists the exact SKU, quantity, condition preference, and target switch family. ORM Systems can quote new or certified refurbished supply options based on available inventory and sourcing. Large orders should include staging needs and required documentation, without assuming fixed stock or lead time.

Question 27

What lead-time detail should buyers confirm for PWR-C1-715WAC-P?

Accepted Answer

Lead time should be confirmed directly on the active quote for the requested quantity and condition. The product is a Cisco Catalyst 9300-family power supply, but market availability changes by region and source. A purchasing team should avoid using past delivery timing as a current commitment unless the seller provides it in writing.

Question 28

What warranty should buyers check for PWR-C1-715WAC-P?

Accepted Answer

Warranty terms should be checked on the quote or invoice before purchase. The applicable coverage may differ by condition, source, region, and seller policy. For refurbished hardware, buyers should ask which tests were performed and what return or replacement terms apply, while avoiding assumptions about manufacturer or seller warranty length.

Question 29

What testing matters for refurbished PWR-C1-715WAC-P?

Accepted Answer

Important refurbishment checks include part-number verification, AC input inspection, output-voltage confirmation, ripple review under load, fan operation, latch condition, connector condition, and visual inspection. Those checks help determine whether the unit is suitable for spare stock or replacement service. Test results should be tied to the exact SKU being supplied.

Question 30

What certifications are relevant to PWR-C1-715WAC-P?

Accepted Answer

Cisco identifies the module as a Platinum-certified or Platinum-rated 715 W AC supply. Cisco's data sheet also places Catalyst 9300 hardware under published safety and EMC compliance sections. Exact compliance needs should be checked against the Cisco data sheet and the destination site's procurement requirements before using a certification claim in purchasing records.

Question 31

What should be checked before installing PWR-C1-715WAC-P?

Accepted Answer

Before installation, technicians should confirm the switch family, model, power budget, AC input, power cord, and second-slot configuration. Cisco guidance also expects an unused power-supply slot to be filled with a blank cover. During replacement, local AC OK and PS OK LED status should be checked after the module is seated and powered.

Question 32

Does PWR-C1-715WAC-P require software licensing?

Accepted Answer

No separate software license is identified for the power supply module itself in the cited Cisco hardware specifications. It is a physical power component for supported Catalyst 9300-family switches. Any licensing questions should relate to the switch platform or software features, not to the PSU SKU unless Cisco provides separate guidance.

Question 33

What tools or prerequisites apply to replacing PWR-C1-715WAC-P?

Accepted Answer

Cisco's replacement procedure focuses on power-supply handling, AC cord removal, latch operation, module insertion, and LED verification. The site should confirm sufficient remaining system power before removal when the switch is running. Replacement should be performed by qualified staff following Cisco hardware guidance and local electrical safety rules.

Question 34

Where can buyers purchase PWR-C1-715WAC-P in the UK?

Accepted Answer

UK buyers can request a quote from ORM Systems with the exact SKU, target Catalyst switch family, quantity, condition preference, and delivery location. The quote should confirm current availability, condition, applicable warranty terms, and delivery details. The SKU should not be shortened or replaced with a similar Cisco power supply number.

Question 35

Does ORM Systems ship PWR-C1-715WAC-P internationally?

Accepted Answer

International purchasing should be confirmed during the quote process with the destination country, quantity, and condition preference. Shipping options, documentation, and timing depend on current inventory and destination requirements. Buyers should request written confirmation rather than assuming international delivery terms from a previous Cisco hardware order.

	PWR-C1-715WAC-P	PWR-C1-350WAC-P	PWR-C1-1100WAC-P
Product Type	Switch Power Supply	Switch Power Supply	Switch Power Supply
Wattage	715W	350W	1100W
Form Factor	Hot-Plug Module	Hot-Plug Module	Hot-Plug Module
80 PLUS Certification	80 Plus Platinum	80 Plus Platinum	80 Plus Platinum
Remote Monitoring	No Remote Monitoring	No Remote Monitoring	No Remote Monitoring
Input Voltage	100 to 240 VAC, 47 to 63 Hz	100 to 240 VAC, 47 to 63 Hz	115 to 240 VAC, 47 to 63 Hz
Hot-Swap Capable	Hot-Swap	Hot-Swap	Hot-Swap
Efficiency Rating	Platinum-rated	Platinum-rated	Platinum-rated
Operating Temperature	23 to 113 F (-5 to 45 C), up to 5000 ft	23 to 113 F (-5 to 45 C), up to 5000 ft	23 to 113 F (-5 to 45 C), up to 5000 ft
Product Name	715 W AC Platinum certified power supply module	350 W AC Platinum certified power supply module	1100 W AC Platinum certified power supply module
Height	1.58 in	1.58 in	1.58 in
Width	3.25 in	3.25 in	3.25 in
Depth	12.20 in	12.20 in	13.7 in
Weight	2.6 lb (1.2 kg)	2.3 lb (1.2 kg)	3.1 lb (1.4 kg)

PWR-C1-715WAC-P

Frequently Bought Together

CAB-SPWR-30CM

A0K02A

AP9893

CAB-SPWR-150CM

AP8704S-NA

AP9870

AP8702S-NA

PWR-C1-715WAC-P Overview

PWR-C1-715WAC-P Specifications

PWR-C1-715WAC-P Use Case

Campus Access Power-Bay Replacement

PoE Budget Planning for Wiring Closets

StackPower Spare Pool Standardization

Speak To a Hardware Specialist in Your Region

Product Comparison Table

Compliance & Warranty

100% Genuine Product Guarantee

Up to 3-Year Warranty Coverage

Hassle-Free RMA & Returns

Rigorously Tested & Quality Assured

Expert Technical Support

Fast Global Delivery

Questions & Answers