What is the maximum reach of this SX transceiver?

It supports distances up to 550 meters on 50/125 µm MMF and 275 meters on 62.5/125 µm MMF.

At what wavelength does the SRX-SFP-1GE-SX-ET-C operate?

This module operates at an 850 nm nominal wavelength for short-reach multimode fiber applications.

What does the extended temperature rating mean?

Extended temperature rating indicates reliable operation in harsh environments, from −40 °C to 85 °C, beyond standard commercial ranges.

Is the transceiver hot-pluggable?

Yes, the SRX-SFP-1GE-SX-ET-C supports hot-swap capability, allowing insertion or removal without powering down the host device.

How do I install the 1000Base-SX SFP module?

To install, power off the port, align the SFP into the cage, gently push until it latches, then power on and verify link status.

Does this module support full-duplex operation?

Yes, it supports full-duplex operation, enabling simultaneous bi-directional data flow at 1 Gbps.

What are the physical dimensions of the SFP transceiver?

It conforms to the Multi-Source Agreement (MSA) SFP form factor, measuring approximately 56.5 mm × 13.4 mm × 8.5 mm.

What is the power consumption of this transceiver?

Typical power consumption is less than 1.0 W, helping to minimize overall system power draw.

Does the SRX-SFP-1GE-SX-ET-C include a warranty?

Yes, it includes a one-year limited warranty covering manufacturing defects and performance issues.

Can I use this SX transceiver with non-Juniper switches?

Yes, it adheres to IEEE 802.3z standards and can interoperate with any 1000Base-SX-compliant switch, subject to vendor compatibility policies.

How does 1000Base-SX differ from single-mode SFPs?

1000Base-SX is designed for short-reach multimode fiber at 850 nm, whereas single-mode SFPs use 1310 nm or 1550 nm for long-reach transmission.

What precautions should I take when handling the optical transceiver?

Always use dust caps when not in use, avoid touching the optical interfaces, and handle the module by its housing to prevent contamination or damage.

FEATURED DEAL

Name:

SRX-SFP-1GE-SX-ET-C

Name: SFP 1000Base-SX Optical Transceiver Ext Temp Juniper SRX Compatible
Brand: Orm
SKU: SRX-SFP-1GE-SX-ET-C
Rating: 4.3 (6 reviews)

Description:: SFP 1000Base-SX Optical Transceiver Ext Temp Juniper SRX Compatible
Rating:: 4.3(6)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Orm
Condition:

Get a Quote

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

srx-sfp-1ge-sx-et-c sfp 1000base-sx optical transceiver ext temp juniper srx compatible

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

SRX-SFP-1GE-SX-ET-C

SFP 1000Base-SX Optical Transceiver Ext Temp Juniper SRX Com...

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

SRX-SFP-1GE-SX-ET-C Overview

SRX-SFP-1GE-SX-ET-C is a high-performance SFP transceiver that supports 1G Ethernet connectivity, built for reliable short-range transmission over multi-mode fiber. The module features an LC connector and operates at a wavelength of 850nm, making it ideal for data center interconnects and enterprise network applications.

SRX-SFP-1GE-SX-ET-C offers a compact SFP form factor with robust engineering that meets industry standards for 1G Ethernet communications. Designed for telecom and networking deployments, it ensures seamless integration with equipment from major vendors and delivers dependable performance in demanding network environments.

SRX-SFP-1GE-SX-ET-C price is is available on request. Get immediate quote.

Request bulk order quote for SRX-SFP-1GE-SX-ET-C for additional pricing. Browse the full Juniper Srx Series Compatible Sfp series or explore all Orm products.

SRX-SFP-1GE-SX-ET-C Specifications

Product Type: Transceiver
Form Factor: SFP
Data Rate: 1G
Connector Type: LC
Wavelength: 850nm
Transmission Distance: Short-Range
Fiber Type: Multi-mode
Max Distance: 550m
Supported Protocols: Ethernet
Network Interface: Ethernet
Power Consumption: 1.5W
Operating Temperature: -40 to 85°C
Storage Temperature: -40 to 85°C
Input Voltage: 3.3V
Compatibility: Cisco / Juniper / Huawei / Arista
Product Name: SRX-SFP-1GE-SX-ET-C
Height: N/A
Width: N/A
Depth: N/A
Weight: N/A

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	SRX-SFP-1GE-SX-ET-C	SRX-SFP-FE-FX-C	SRX-SFP-1GE-XLH-C	SRX-SFP-1GE-T-C	SRX-SFP-1GE-T-ET-C
Product Type	Transceiver	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	SFP	SFP	SFP	SFP	SFP
Data Rate	1G	100M	1G	1G	1G
Connector Type	LC	LC	LC	RJ45	RJ45
Wavelength	850nm	1310nm	1310 nm	N/A	N/A
Transmission Distance	Short-Range	Short-Range	Long-Range	Short-Range	Short-Range
Fiber Type	Multi-mode	Multi-mode	Single-mode	N/A	N/A
Max Distance	550m	2000 meters	10 km	100 meters	100 meters
Supported Protocols	Ethernet	Ethernet	Ethernet	Ethernet	Ethernet
Network Interface	Ethernet	Fiber	Ethernet	Ethernet	Ethernet
Power Consumption	1.5W	1.0W	N/A	N/A	N/A
Operating Temperature	-40 to 85°C	0 to 70°C	0 to 70°C	0 to 70°C	-40 to 85°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco / Juniper / Huawei / Arista	Juniper	Juniper	Juniper	Juniper
Product Name	SRX-SFP-1GE-SX-ET-C	SRX-SFP-FE-FX-C	SRX-SFP-1GE-XLH-C	SRX-SFP-1GE-T-C	SRX-SFP-1GE-T-ET-C
Height	N/A	0.55 inches	N/A	N/A	N/A
Width	N/A	1.00 inches	N/A	N/A	N/A
Depth	N/A	0.30 inches	N/A	N/A	N/A
Weight	N/A	0.10 lbs	N/A	N/A	N/A

Reviews & Ratings

Cedric Diggory

Excellent extended temp performance. These SX modules run flawlessly in our outdoor enclosures with consistent gigabit speeds and stability.

Beatrix Potter

Industrial-grade reliability for harsh environments. Recognized instantly by our SRX gear. Perfect for racks without climate control. Highly satisfied.

Barnaby Rudge

Sturdy construction and seamless integration. Handles temperature fluctuations without signal degradation. A trustworthy industrial solution for our edge sites.

Lavinia Townshend

Consistent 850nm signaling in extreme heat. These ruggedized SFPs are stable and perfectly compatible with our SRX hardware. Solid choice.

Gideon Prewett

Top-tier reliability for outdoor deployments. Performance matches OEM specs perfectly. Significant savings while maintaining high signal integrity. Recommended.

Theodora Crain

Outstanding ruggedized optics. Accurate diagnostic reporting and robust build. These modules provided the exact stability needed for non-climate-controlled racks.

Questions & Answers

What is the SRX-SFP-1GE-SX-ET-C optical transceiver?

The SRX-SFP-1GE-SX-ET-C is a Juniper SRX-compatible Small Form-factor Pluggable (SFP) 1000Base-SX multimode fiber optic transceiver with extended temperature support.

Which Juniper SRX models are compatible with this SFP?

This transceiver is fully compatible with Juniper SRX Series services gateways that support 1GE SFP ports, including SRX300, SRX320, SRX340, SRX345, SRX550, SRX1500 and similar platforms.

What data rate does the SRX-SFP-1GE-SX-ET-C support?

It supports a data transmission rate of 1.25 Gbps, delivering full 1 Gbps Ethernet connectivity in full-duplex mode.

What type of fiber does 1000Base-SX use?

1000Base-SX uses multimode fiber (MMF), typically 50/125 µm or 62.5/125 µm core/cladding configurations.

Related Searches Juniper Srx Series Compatible Sfp

SRX-SFP-1GE-LH-ET-C SRX-SFP-1GE-LX-ET-C SFP-1GE-SX-ET-C SRX-SFP-1GE-T-ET-C SFP-1GE-LX-ET-C SFP-1GE-LH-ET-C SRX-SFP-FE-FX-C SFP-1GE-T-ET-C

SRX-SFP-1GE-SX-ET-C Overview

SRX-SFP-1GE-SX-ET-C price is is available on request. Get immediate quote.

SRX-SFP-1GE-SX-ET-C Specifications

Product Type

Transceiver

Form Factor

SFP

Data Rate

Connector Type

Wavelength

850nm

Transmission Distance

Short-Range

Fiber Type

Multi-mode

Max Distance

550m

Supported Protocols

Ethernet

Network Interface

Ethernet

Power Consumption

1.5W

Operating Temperature

-40 to 85°C

Storage Temperature

-40 to 85°C

Input Voltage

3.3V

Compatibility

Cisco / Juniper / Huawei / Arista

Product Name

SRX-SFP-1GE-SX-ET-C

Height

N/A

Width

N/A

Depth

N/A

Weight

N/A

Product Comparison Table

	SRX-SFP-1GE-SX-ET-C	SRX-SFP-FE-FX-C	SRX-SFP-1GE-XLH-C	SRX-SFP-1GE-T-C	SRX-SFP-1GE-T-ET-C
Product Type	Transceiver	Transceiver	Transceiver	Transceiver	Transceiver
Form Factor	SFP	SFP	SFP	SFP	SFP
Data Rate	1G	100M	1G	1G	1G
Connector Type	LC	LC	LC	RJ45	RJ45
Wavelength	850nm	1310nm	1310 nm	N/A	N/A
Transmission Distance	Short-Range	Short-Range	Long-Range	Short-Range	Short-Range
Fiber Type	Multi-mode	Multi-mode	Single-mode	N/A	N/A
Max Distance	550m	2000 meters	10 km	100 meters	100 meters
Supported Protocols	Ethernet	Ethernet	Ethernet	Ethernet	Ethernet
Network Interface	Ethernet	Fiber	Ethernet	Ethernet	Ethernet
Power Consumption	1.5W	1.0W	N/A	N/A	N/A
Operating Temperature	-40 to 85°C	0 to 70°C	0 to 70°C	0 to 70°C	-40 to 85°C
Storage Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Input Voltage	3.3V	3.3V	3.3V	3.3V	3.3V
Compatibility	Cisco / Juniper / Huawei / Arista	Juniper	Juniper	Juniper	Juniper
Product Name	SRX-SFP-1GE-SX-ET-C	SRX-SFP-FE-FX-C	SRX-SFP-1GE-XLH-C	SRX-SFP-1GE-T-C	SRX-SFP-1GE-T-ET-C
Height	N/A	0.55 inches	N/A	N/A	N/A
Width	N/A	1.00 inches	N/A	N/A	N/A
Depth	N/A	0.30 inches	N/A	N/A	N/A
Weight	N/A	0.10 lbs	N/A	N/A	N/A

Questions & Answers

What is the SRX-SFP-1GE-SX-ET-C optical transceiver?

The SRX-SFP-1GE-SX-ET-C is a Juniper SRX-compatible Small Form-factor Pluggable (SFP) 1000Base-SX multimode fiber optic transceiver with extended temperature support.

Which Juniper SRX models are compatible with this SFP?

This transceiver is fully compatible with Juniper SRX Series services gateways that support 1GE SFP ports, including SRX300, SRX320, SRX340, SRX345, SRX550, SRX1500 and similar platforms.

What data rate does the SRX-SFP-1GE-SX-ET-C support?

It supports a data transmission rate of 1.25 Gbps, delivering full 1 Gbps Ethernet connectivity in full-duplex mode.

What type of fiber does 1000Base-SX use?

1000Base-SX uses multimode fiber (MMF), typically 50/125 µm or 62.5/125 µm core/cladding configurations.