Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
$65.12
$28.3556.5% off
Quantity:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
WS-C2950G-48-EI
Cisco WS-C2950G-48-EI Catalyst 2950 48-Port Fast Ethernet Sw...
Trusted by the Highest-Stakes Buyers
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Built Global. Stocked Local.
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Buyer Protection on Every Order
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Verified By Federal Bodies
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Since 2016, Enterprise-Trusted
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
WS-C2950G-48-EI is a managed Layer 2 access switch with 48 10/100 Mbps RJ-45 ports and two fixed 1G GBIC uplink slots. The access ports are non-PoE, so connected endpoints requiring Ethernet power need a separate power arrangement. Its full-width, 1U chassis belongs to the Catalyst 2950 family and ships with Enhanced Image software for branch-office and workgroup switching. The discontinued WS-C2950G-24-EI is the density sibling, carrying 24 access ports. Cisco Catalyst 2950G-48 is legacy replacement hardware: Cisco support has ended for this retired series. Match the existing access-speed requirements and GBIC connections before selecting this configuration.
WS-C2950G-48-EI price for new stock is is available on request. Get immediate quote. WS-C2950G-48-EI refurb price is $28.35.
Request bulk order quote for WS-C2950G-48-EI for additional pricing. Browse the full Cisco 2950 Catalyst Switches series or explore all Cisco products.
13.6 Gbps switching capacity defines the aggregate forwarding envelope, while 10.1 Mpps forwarding applies to 64-byte packets. An 8000-entry MAC address table supports address learning across the attached Ethernet segment. WS-C2950G-48-EI uses an 8 MB shared packet-memory architecture and 8 MB flash storage for its switching software. Enhanced Image adds rate limiting and security filtering, including traffic classification using MAC addresses, IP addresses and transport-port information. Four egress queues provide separate scheduling treatment for traffic classes. LACP and PAgP configure aggregated Ethernet links, while IGMP snooping controls multicast delivery to interested receivers. These functions operate at the switching edge; the unit does not route between VLANs. The fixed internal power supply does not accept a second internal PSU, and external backup power uses the rear RPS connection. Keep that distinction when specifying power redundancy.
ORM Systems offers WS-C2950G-48-EI in new sealed and certified refurbished condition; select the condition and confirm included accessories before placing the order. Certified refurbished units are inspected and bench-tested for power-on and POST, rated-speed port links, clean boot and fan status; firmware is verified and configuration is wiped to factory default. ORM warranty is up to 3-year extended for new units and up to 1 year for certified refurbished units, with 30-day returns on every condition, terms apply; Cisco's former Limited Lifetime coverage has ended. POs are accepted, Net-30 is available for government, and enterprise or volume orders can specify UK, EU, US or MEA stock and RMA handling with advance replacement.
| Key Specs | Key Spec Values |
|---|---|
Operating System | Cisco IOS |
Port Configuration | 48 x 10/100, 2 x 1G GBIC uplinks |
Stacking | GigaStack GBIC / 9 switches with WS-X3500-XL |
Max Power Draw | 45W |
For a branch retaining existing copper cabling, endpoint runs must stay within 100 m. The purchase should identify cable lengths and preserve rear-panel access for commissioning, rather than assuming the existing installation is ready. Verify the branch cable schedule and console-access arrangement before issuing the PO.
For a staging lab reproducing an existing switching configuration, PVST+, RSTP and MSTP define the available spanning-tree options. Match the selected mode to the production configuration being tested, including uplink behavior. Specify the intended software image and test topology before ordering the lab unit.
When an existing administration workflow relies on CMS clustering, a cluster can contain 16 switches and use one management IP address. That is a management arrangement rather than a replacement for the physical cabling plan. Identify the command switch and intended cluster membership before specifying the rollout order.
Gigabit connectivity at every endpoint
The access ports operate at 10/100 Mbps, not Gigabit Ethernet. The 1G uplink slots do not change endpoint speed, so Gigabit endpoint connections require different access hardware.
PoE-powered phones or access points
The access ports do not supply PoE. Phones and access points requiring Ethernet power need separately powered connections or a switch that provides the required endpoint power.
Routing between local VLANs
Layer 2 switching does not provide inter-VLAN routing. Enhanced Image adds filtering and traffic controls rather than routing, so communication between VLANs requires a separate routing device.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| WS-C2950G-48-EI |  WS-C2950G-24-EI-DC |  WS-C2950G-24-EI |  WS-C2950C-24 |  WS-C2950G-12-EI | |
|---|---|---|---|---|---|
| Ethernet Technology | Fast Ethernet | Fast Ethernet | Fast Ethernet | Fast Ethernet | Fast Ethernet |
| Form Factor | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U | Rack-Mount 1U |
| Manufacturer Part Number | WS-C2950G-48-EI | WS-C2950G-24-EI-DC | WS-C2950G-24-EI | WS-C2950C-24 | WS-C2950G-12-EI |
| Switching Capacity | 13.6 Gbps | 8.8 Gbps | 8.8 Gbps | 8.8 Gbps | 13.6 Gbps |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
WS-C2950G-48-EI identifies a Catalyst 2950 switch with GBIC-based Gigabit Ethernet uplinks; 48 denotes the 48 10/100 access ports, and EI denotes Enhanced Image software. The configuration includes two GBIC slots. The Gigabit designation concerns the uplinks, not Gigabit-speed access ports.
WS-C2950G-48-EI supports web-based Device Manager or CMS, Cisco Network Assistant, and Cisco IOS CLI access through console, Telnet or SSH with a cryptographic image. Additional administration paths include SNMP management and CiscoView. Cisco Intelligence Engine 2100 supports configuration automation. Confirm the installed image when encrypted management is required.
WS-C2950G-48-EI is discontinued and belongs to the retired Catalyst 2950 series, for which Cisco support has ended. New sealed condition does not change that retirement status or reinstate Cisco support. Treat the purchase as legacy replacement hardware and specify independent service arrangements before issuing the purchase order.
ORM Systems offers WS-C2950G-48-EI new sealed with up to 3-year extended warranty or certified refurbished with up to 1 year. Refurbished units are inspected and bench-tested. Returns are 30 days on every condition; terms apply. Cisco's original Limited Lifetime hardware warranty is no longer active because the Catalyst 2950 series is retired.
WS-C2950G-48-EI accepts GBIC transceivers, including WS-G5483 for 1000BASE-T, WS-G5484 for 1000BASE-SX, WS-G5486 for 1000BASE-LX/LH and WS-G5487 for 1000BASE-ZX. These are GBIC connections rather than SFP connections. Specify the required media type and matching cabling instead of assuming an existing SFP can be reused.
WS-C2950G-48-EI supports GigaStack GBIC interconnection through WS-X3500-XL, with nine switches in a daisy chain sharing 1 Gbps forwarding bandwidth. A point-to-point connection provides 2 Gbps forwarding bandwidth. The interconnect occupies a GBIC slot; specify WS-X3500-XL and its included cable rather than assuming dedicated rear stacking ports.
No, WS-C2950G-48-EI does not have a second internal PSU bay. The fixed internal AC supply can be backed up by PWR300-AC-RPS-N1, an external system supporting six connected devices but only one failed device at a time. That arrangement is external backup rather than dual internal power supplies.
No, the Catalyst 2950 is a Layer 2 switch and does not route between VLANs. Enhanced Image supplies security filtering and traffic-priority controls rather than IP routing. Specify upstream routing separately when different VLANs must communicate, rather than treating the software image suffix as a routing license.
No, WS-C2950G-48-EI does not supply PoE through its access ports. Its internal supply powers the switch electronics rather than connected Ethernet endpoints. Phones, access points and other devices requiring Ethernet power need a separate power arrangement; the Enhanced Image software does not add endpoint-power hardware.
WS-C2950G-48-EI provides 48 10/100 access ports, while WS-C2950G-24-EI provides 24; both have two GBIC uplink slots and Enhanced Image. Both models are discontinued. The 48-port configuration matches a higher-density legacy installation, while the 24-port configuration matches a smaller existing access requirement.
WS-C2950G-48-EI uses internal AC power, while WS-C2950G-24-EI-DC uses DC power and has 24 rather than 48 access ports. Both configurations carry two GBIC uplink slots and Enhanced Image. Both are discontinued; the distinction matters when matching an existing AC-powered installation or a smaller DC-powered installation.
WS-C2950G-48-EI carries Enhanced Image, while WS-C2950SX-48-SI carries Standard Image. Enhanced Image adds rate limiting and security filtering to the basic switching services. Both models are discontinued; the EI configuration matches legacy policies requiring those controls, while the SI configuration matches installations using the basic software feature set.
United States
