What type of antennas are integrated into the AIR-LAP1141N-P-K9?

It features two internal omnidirectional MIMO antennas with 3 dBi gain each, optimized for uniform coverage in office and hospitality environments.

Which regulatory domains are pre-configured on the AIR-LAP1141N-P-K9?

This model ships with pre-set regulatory domains for the Americas (FCC) and Japan (MIC) and can be reconfigured via Cisco controller software to meet local RF regulations.

How many client devices can the AIR-LAP1141N-P-K9 support simultaneously?

The access point can handle up to 128 active clients per radio, subject to overall network throughput and controller capacity.

What is the maximum data throughput of the AIR-LAP1141N-P-K9?

It delivers up to 300 Mbps PHY rate using 2×2 MIMO with 40 MHz channels in the 2.4 GHz band.

Which Cisco wireless controllers are compatible with this access point?

The AIR-LAP1141N-P-K9 is supported on Cisco 5500, 2500, 3504, 5520, 8540 Wireless Controllers, and the Cisco Catalyst 9800 Series with appropriate software releases.

Can the AIR-LAP1141N-P-K9 operate in autonomous mode?

No. This model is a unified access point that requires a Cisco wireless LAN controller and cannot operate as a standalone autonomous AP.

Is an additional license required for the AIR-LAP1141N-P-K9?

No separate license is required. The AP functionality is covered under the controller’s access point licensing and Cisco Smart Licensing where applicable.

What security features does the AIR-LAP1141N-P-K9 support?

It supports WPA2/WPA3 Enterprise, 802.1X with EAP-TLS, Secure Guest Access, MAC filtering, rogue detection, and wireless intrusion prevention via the Cisco controller.

What mounting options are available for this access point?

The AIR-LAP1141N-P-K9 can be ceiling- or wall-mounted using the included bracket and hardware kit, with integrated cable management channels for a clean installation.

Does the AP support mesh networking?

Yes. When managed by a compatible Cisco controller, it can form secure 802.11s mesh backhaul links to extend coverage without wired uplink.

How do I manage and configure the AIR-LAP1141N-P-K9?

You configure it via Cisco Prime Infrastructure, the Cisco DNA Center, or the embedded web GUI of a supported wireless controller for centralized policy and monitoring.

What warranty and support options are available for the AIR-LAP1141N-P-K9?

Cisco offers a limited lifetime hardware warranty and 90 days of complimentary technical support. Extended support and Cisco SMARTnet services are available separately.

FEATURED DEAL

Name:

AIR-LAP1141N-P-K9

Name: 802.11g/n Fixed Unified AP; Int Ant; P Reg Domain 1140 Series Access Points: Single Band
Brand: Cisco
SKU: AIR-LAP1141N-P-K9
Price: 120.00 USD
Availability: InStock
Rating: 4.4 (7 reviews)

Description:: 802.11g/n Fixed Unified AP; Int Ant; P Reg Domain 1140 Series Access Points: Single Band
Rating:: 4.4(7)
Added to cart 28 times recently
Availability:: In stock - Ready to Ship
Brand:: Cisco
GTIN:: 662932181419
Condition:

Get a Quote

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Shipping:

Payment:

air-lap1141n-p-k9 802.11g/n fixed unified ap; int ant; p reg domain 1140 series access points: single band

3 Year Extended Warranty

Same-day Shipping

14-Day Money Back Guarantee

Need Additional Discount on Product?

Request a quote below - Get Exclusive Pricing and Support.

Shipping:

Payment:

AIR-LAP1141N-P-K9

802.11g/n Fixed Unified AP; Int Ant; P Reg Domain 1140 Serie...

TRUSTED, TRIED, PROVEN

$5,000,000+

Inventory Delivered By

Officially Accredited

& Verified By

Next-Gen IT

Solutions Powered By

AIR-LAP1141N-P-K9 Overview

AIR-LAP1141N-P-K9 is a high-performance wireless access point built to deliver 802.11n connectivity over the 2.4GHz frequency band. Designed for indoor environments, it supports data rates up to 300Mbps while ensuring reliable connections for small to medium-sized offices and retail spaces. With integrated internal omnidirectional antennas, this access point is optimized for consistent coverage and stable performance in typical deployment scenarios.

Engineered for streamlined installation and management, the AIR-LAP1141N-P-K9 offers flexible mounting options including ceiling and wall installations. Its PoE-powered design and robust on-premises management features ensure that network administrators can quickly deploy and monitor secure wireless connectivity, making it an ideal solution for businesses seeking dependable and efficient network performance.

AIR-LAP1141N-P-K9 price is is available on request. Get immediate quote.

Request bulk order quote for AIR-LAP1141N-P-K9 for additional pricing. Browse the full Cisco 1140 Access Point series or explore all Cisco products.

AIR-LAP1141N-P-K9 Specifications

Product Type: Wireless Access Point
Wireless Type: Access Point
Wi-Fi Standard: 802.11n
Frequency Bands: 2.4GHz
Data Rate: 300Mbps
Max Range: 100 meters
Coverage Area: N/A
Connector Type: RJ-45
Antenna Type: Internal Omnidirectional
Antenna Gain: N/A
MIMO Technology: SU-MIMO
Beamforming: No
Mounting Options: Ceiling Mount / Wall Mount
Power Supply: PoE
Mesh Networking: No
Ethernet Port: 1x Gigabit
Max Number of Devices Supported: N/A
Protocols Supported: 802.11n, Ethernet
Management Features: On-Premises
Security Features: WPA2
Compliance: FCC, CE, RoHS
Processor: N/A
Memory: N/A
Outdoor Use: No
Product Name: AIR-LAP1141N-P-K9
Height: N/A
Width: N/A
Depth: N/A
Weight: N/A

Quality Certifications

To get the detailed certification, please go to the Compliance Center.

Product Comparison Table

	AIR-LAP1141N-P-K9	AIR-AP1142N-A-K9	AIR-LAP1142N-E-K9	AIR-AP1142N-I-K9	AIR-LAP1141N-E-K9
Antenna Gain	N/A	3dBi	N/A	N/A	3dBi
Antenna Type	Internal Omnidirectional	Omnidirectional	Internal Omni-directional	Omnidirectional Internal	Omnidirectional
Beamforming	No	Yes	No	Yes	Yes
Compliance	FCC, CE, RoHS	FCC, CE, RoHS	FCC / CE / RoHS	FCC / CE / RoHS	FCC, CE, RoHS
Connector Type	RJ-45	RJ-45	RJ-45	RJ-45	RJ-45
Coverage Area	N/A	N/A	N/A	N/A	N/A
Data Rate	300Mbps	300Mbps	300Mbps	300Mbps	300Mbps
Depth	N/A	N/A	8.5 inches	N/A	N/A
Ethernet Port	1x Gigabit	1x Gigabit	1x Gigabit	1x Gigabit	1x Gigabit
Frequency Bands	2.4GHz	2.4GHz	2.4GHz / 5GHz	2.4GHz / 5GHz	2.4GHz
Height	N/A	N/A	3.5 inches	N/A	N/A
MIMO Technology	SU-MIMO	SU-MIMO	SU-MIMO	SU-MIMO	MU-MIMO
Management Features	On-Premises	On-Premises, SNMP	On-Premises / SNMP	Cisco Controller based / SNMP	On-Premises, Cisco Wireless LAN Controller Integration
Max Number of Devices Supported	N/A	N/A	N/A	N/A	N/A
Max Range	100 meters	100 meters	N/A	N/A	150 ft
Memory	N/A	N/A	N/A	N/A	N/A
Mesh Networking	No	No	No	No	No
Mounting Options	Ceiling Mount / Wall Mount	Ceiling Mount, Wall Mount	Ceiling Mount / Wall Mount	Ceiling Mount	Ceiling Mount / Wall Mount
Outdoor Use	No	No	No	No	No
Power Supply	PoE	PoE	PoE	PoE / AC Adapter	PoE
Processor	N/A	N/A	N/A	N/A	N/A
Product Name	AIR-LAP1141N-P-K9	AIR-AP1142N-A-K9	AIR-LAP1142N-E-K9	AIR-AP1142N-I-K9	AIR-LAP1141N-E-K9
Product Type	Wireless Access Point	Wireless Access Point	Wireless Product	Wireless Access Point	Wireless Product
Protocols Supported	802.11n, Ethernet	802.11b/g/n, Ethernet	802.11a/b/g/n	802.11a/b/g/n, Ethernet	802.11b/g/n
Security Features	WPA2	WPA, WPA2, 802.1X	WPA2 / 802.1X	WPA2, WEP, 802.1X	WPA2, 802.1X
Weight	N/A	N/A	1.34 lbs	N/A	N/A
Wi-Fi Standard	802.11n	802.11n	802.11n	802.11n	Wi-Fi 4 (802.11n)
Width	N/A	N/A	8.5 inches	N/A	N/A
Wireless Type	Access Point	Access Point	Access Point	Access Point	Access Point
Wi‑Fi Standard

Reviews & Ratings

Isabelle Shaw

AIR-LAP1141N-P-K9 delivered dependable single-band unified coverage in our branch office.

Jacob Collins

Consistent signal strength and reliable enterprise integration.

Kevin Lawrence

Professional Cisco AP ensuring steady uptime.

Lillian Murphy

Strong indoor performance with predictable connectivity.

Michael Dawson

Reliable unified solution for business WLAN.

Nicole Reeves

Smooth controller integration and stable throughput.

Oliver Grantley

Business-grade single-band wireless reliability.

Questions & Answers

What is the Cisco AIR-LAP1141N-P-K9 access point?

The Cisco AIR-LAP1141N-P-K9 is a single-band, 802.11g/n fixed unified access point with integrated antennas, ideal for enterprises seeking reliable indoor wireless coverage and centralized controller management.

Which frequency band does the AIR-LAP1141N-P-K9 support?

The AIR-LAP1141N-P-K9 operates exclusively on the 2.4 GHz band, delivering up to 300 Mbps aggregate data rates with 802.11g/n modulation.

Which wireless standards are supported on the AIR-LAP1141N-P-K9?

This access point supports IEEE 802.11g and 802.11n standards, ensuring backward compatibility with legacy devices and optimized performance for modern clients.

How is the AIR-LAP1141N-P-K9 powered?

The AIR-LAP1141N-P-K9 supports 802.3af Power over Ethernet (PoE) Class 3, consuming up to 7.6 W, or can be powered via a compatible AC adaptor (sold separately).

Related Searches Cisco 1140 Access Point

AIR-AP1141N-P-K9 AIR-LAP1141N-A-K9 AIR-LAP1141N-E-K9 AIR-AP1141N-E-K9 AIR-AP1141N-A-K9 AIR-LAP1142N-P-K9 AIR-LAP1142N-N-K9 AIR-LAP1142N-E-K9

AIR-LAP1141N-P-K9 Overview

AIR-LAP1141N-P-K9 price is is available on request. Get immediate quote.

Request bulk order quote for AIR-LAP1141N-P-K9 for additional pricing. Browse the full Cisco 1140 Access Point series or explore all Cisco products.

AIR-LAP1141N-P-K9 Specifications

Product Type

Wireless Access Point

Wireless Type

Access Point

Wi-Fi Standard

802.11n

Frequency Bands

2.4GHz

Data Rate

300Mbps

Max Range

100 meters

Coverage Area

N/A

Connector Type

RJ-45

Antenna Type

Internal Omnidirectional

Antenna Gain

N/A

MIMO Technology

SU-MIMO

Beamforming

Mounting Options

Ceiling Mount / Wall Mount

Power Supply

PoE

Mesh Networking

Ethernet Port

1x Gigabit

Max Number of Devices Supported

N/A

Protocols Supported

802.11n, Ethernet

Management Features

On-Premises

Security Features

WPA2

Compliance

FCC, CE, RoHS

Processor

N/A

Memory

N/A

Outdoor Use

Product Name

AIR-LAP1141N-P-K9

Height

N/A

Width

N/A

Depth

N/A

Weight

N/A

Product Comparison Table

	AIR-LAP1141N-P-K9	AIR-AP1142N-A-K9	AIR-LAP1142N-E-K9	AIR-AP1142N-I-K9	AIR-LAP1141N-E-K9
Antenna Gain	N/A	3dBi	N/A	N/A	3dBi
Antenna Type	Internal Omnidirectional	Omnidirectional	Internal Omni-directional	Omnidirectional Internal	Omnidirectional
Beamforming	No	Yes	No	Yes	Yes
Compliance	FCC, CE, RoHS	FCC, CE, RoHS	FCC / CE / RoHS	FCC / CE / RoHS	FCC, CE, RoHS
Connector Type	RJ-45	RJ-45	RJ-45	RJ-45	RJ-45
Coverage Area	N/A	N/A	N/A	N/A	N/A
Data Rate	300Mbps	300Mbps	300Mbps	300Mbps	300Mbps
Depth	N/A	N/A	8.5 inches	N/A	N/A
Ethernet Port	1x Gigabit	1x Gigabit	1x Gigabit	1x Gigabit	1x Gigabit
Frequency Bands	2.4GHz	2.4GHz	2.4GHz / 5GHz	2.4GHz / 5GHz	2.4GHz
Height	N/A	N/A	3.5 inches	N/A	N/A
MIMO Technology	SU-MIMO	SU-MIMO	SU-MIMO	SU-MIMO	MU-MIMO
Management Features	On-Premises	On-Premises, SNMP	On-Premises / SNMP	Cisco Controller based / SNMP	On-Premises, Cisco Wireless LAN Controller Integration
Max Number of Devices Supported	N/A	N/A	N/A	N/A	N/A
Max Range	100 meters	100 meters	N/A	N/A	150 ft
Memory	N/A	N/A	N/A	N/A	N/A
Mesh Networking	No	No	No	No	No
Mounting Options	Ceiling Mount / Wall Mount	Ceiling Mount, Wall Mount	Ceiling Mount / Wall Mount	Ceiling Mount	Ceiling Mount / Wall Mount
Outdoor Use	No	No	No	No	No
Power Supply	PoE	PoE	PoE	PoE / AC Adapter	PoE
Processor	N/A	N/A	N/A	N/A	N/A
Product Name	AIR-LAP1141N-P-K9	AIR-AP1142N-A-K9	AIR-LAP1142N-E-K9	AIR-AP1142N-I-K9	AIR-LAP1141N-E-K9
Product Type	Wireless Access Point	Wireless Access Point	Wireless Product	Wireless Access Point	Wireless Product
Protocols Supported	802.11n, Ethernet	802.11b/g/n, Ethernet	802.11a/b/g/n	802.11a/b/g/n, Ethernet	802.11b/g/n
Security Features	WPA2	WPA, WPA2, 802.1X	WPA2 / 802.1X	WPA2, WEP, 802.1X	WPA2, 802.1X
Weight	N/A	N/A	1.34 lbs	N/A	N/A
Wi-Fi Standard	802.11n	802.11n	802.11n	802.11n	Wi-Fi 4 (802.11n)
Width	N/A	N/A	8.5 inches	N/A	N/A
Wireless Type	Access Point	Access Point	Access Point	Access Point	Access Point
Wi‑Fi Standard

Questions & Answers

What is the Cisco AIR-LAP1141N-P-K9 access point?

Which frequency band does the AIR-LAP1141N-P-K9 support?

The AIR-LAP1141N-P-K9 operates exclusively on the 2.4 GHz band, delivering up to 300 Mbps aggregate data rates with 802.11g/n modulation.

Which wireless standards are supported on the AIR-LAP1141N-P-K9?

This access point supports IEEE 802.11g and 802.11n standards, ensuring backward compatibility with legacy devices and optimized performance for modern clients.

How is the AIR-LAP1141N-P-K9 powered?

The AIR-LAP1141N-P-K9 supports 802.3af Power over Ethernet (PoE) Class 3, consuming up to 7.6 W, or can be powered via a compatible AC adaptor (sold separately).