Featured Deal
Hand-picked by our procurement team for standout value. This unit is offered at our sharpest price on current stock, verified against live market rates.
Name:
Added to cart 28 times recently
2 In stock - Ready to Ship
Certified Refurbished
Professionally inspected, bench-tested, and firmware-verified, with configurations wiped. Restored to full working order and backed by our warranty.
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Shipping:
Payment:
3 Year Extended Warranty
Same-day Shipping
30-Day Money Back Guarantee
Need Additional Discount on Product?
Request a quote below - Get Exclusive Pricing and Support.
Shipping:
Payment:
C9200-STACK-KIT
Cisco Catalyst 9200 StackWise Stacking Module Kit, Network S...
Federal agencies and Fortune 500 operations source through ORM Systems.
US Government & Defense
Enterprise Clients
Regional teams and 25+ distribution partners keep stock near you and accountability in your time zone.
Pay by PayPal or Revolut with full chargeback rights. Order on PO terms, Net-30 for government.
Every registration we claim is public record — check our federal contractor status yourself before you spend a dollar.
Ten years serving buyers who audit their vendors. From federal agencies to 20,000+ enterprise clients worldwide.
C9200-STACK-KIT is the Cisco StackWise-160 stacking kit designed specifically for Catalyst 9200 C9200 switches, supplying the essential accessory hardware used to link supported switch members into a single unified stack topology. The kit installs in the rear StackWise hardware position on modular-uplink Catalyst 9200 models and comprises two data stack adapters plus one high-bandwidth data stack cable for reliable inter-switch communication. It belongs to the Stacking module class rather than an Ethernet uplink module, network interface card, transceiver, or standalone cable product category. C9200L-STACK-KIT represents the closest sibling product, differing significantly by platform compatibility and available stack bandwidth: C9200-STACK-KIT is engineered for C9200 StackWise-160 architecture, while C9200L-STACK-KIT is designed for C9200L StackWise-80 with reduced bandwidth capacity.
StackWise-160 provides the advanced stacking architecture for compatible Catalyst 9200 switches, with Cisco documenting support for up to 160 Gbps of stack bandwidth in full-ring operation with Spatial Reuse Protocol enabled for optimal performance. Four internal stack rings carry dedicated stack traffic, load-balance control frames, and maintain ring resilience across the stack member topology, and Cisco identifies Catalyst 9200 StackWise-160 separately from the lower-bandwidth Catalyst 9200L StackWise-80 architecture. C9200-STACK-KIT uses the switch platform's dedicated StackWise ports rather than front-panel Ethernet interfaces, ensuring that stack connectivity does not consume valuable RJ-45, SFP, SFP+, or QSFP uplink capacity needed for production network traffic. Up to eight stacking-capable switches operate together as one logical system when the stack is properly cabled, configured, and managed under Cisco IOS XE software control, simplifying operational management and reducing administrative overhead across distributed switch deployments.
C9200-STACK-KIT is installed when a Catalyst 9200 access block requires shared management across switch members, automated stack member discovery, and coordinated stack-wide uplink planning across multiple physical switches working as a unified entity. Engineers fit the data stack adapters securely into both switch chassis, connect the high-bandwidth data stack cable between adapters, verify ring status and connectivity, and manage the resulting switch stack from the designated active member in Cisco IOS XE. The stacking configuration enables synchronized software updates, centralized configuration management, and simplified troubleshooting across the entire stack topology. ORM Systems supplies this module in new and certified refurbished condition, with refurbished units rigorously checked for adapter fit, connector integrity, cable presence, and full functional readiness in compatible Catalyst 9200 hardware platforms. Request a detailed quote for single-site replacement needs, access closet expansion projects, or comprehensive bulk stack standardization initiatives across repeated C9200 deployments in enterprise networks.
C9200-STACK-KIT price is $312.00, a 79.5% saving from the Cisco list price of $1,525.00. C9200-STACK-KIT is in stock and available for next-day dispatch. (terms applied)
Request bulk order quote for C9200-STACK-KIT for additional pricing. Browse the full Cisco Catalyst Stack Kits & Stack Modules series or explore all Cisco products.
C9200-STACK-KIT installs in compatible Catalyst 9200 access switches to form a StackWise-160 access block behind endpoint-facing copper ports. Engineers use the two data stack adapters and supplied data stack cable to connect stack ports between adjacent members, then assign stack member priorities and uplinks in Cisco IOS XE. The access closet presents one management plane while each switch continues serving its own 24-port or 48-port downlinks. The result is higher access-port density with unified control, coordinated uplink planning, and fewer independently managed closet switches.
At the access-to-distribution boundary, C9200-STACK-KIT links multiple Catalyst 9200 members into one StackWise-160 system before traffic moves northbound through modular uplinks. Network teams place cross-stack EtherChannel links toward distribution switches, so uplinks terminate across separate physical members while the stack operates as one logical node. Cisco IOS XE handles stack-wide Layer 2 and Layer 3 configuration from the active switch. The result is a cleaner distribution handoff with link redundancy, controlled spanning tree behavior, and simpler recovery when an access member is serviced.
During a Catalyst 9200 access refresh, the stack kit standardizes how new switches are staged before installation in repeated wiring closets. Engineers install the adapters, choose the correct STACK-T4 cable length, label stack members, and verify IOS XE stack discovery before the switches move into production racks. C9200-STACK-KIT keeps stack hardware consistent across C9200-24P, C9200-48P, C9200-24T, and C9200-48T deployments. The result is faster rollout control with predictable cabling, repeatable configuration steps, and fewer accessory mismatches during site migration.
Mon–Fri: [09:00-16:00]
Avg. response under 30 mins
| C9200-STACK-KIT |  C9300L-STACK-KIT |  C9200L-STACK-KIT |  C3650-STACK-KIT |  C2960X-STACK | |
|---|---|---|---|---|---|
| Product Type | StackWise Stacking Kit | Network Stacking Kit | Stacking Kit | Stacking Kit | Network Switch |
| Form Factor | Modular | Stack Adapter Kit | Modular | Stackable | Fixed, Rack-Mountable |
Every unit is authentic, sourced through trusted and authorised channels, and serial-verified on request. Genuine networking and IT hardware, guaranteed, or your money back.
New products are backed by up to 3 years of extended warranty, and certified refurbished units by up to 3 months, for dependable protection on every order. Coverage is clear, honoured in full, and confirmed on each product page.
If a unit ever falls short, our streamlined RMA process gets a replacement to you fast, with advance replacement available to keep your network running. No jargon, no runaround.
Every device is inspected, bench-tested, and firmware-verified, with configurations wiped before dispatch. Additional testing can be arranged to confirm full working condition on request.
Our specialists assist with compatibility, configuration, licensing, and installation, before and after you buy. Real hardware expertise, whenever you need it.
dispatched quickly and shipped worldwide from regional hubs, fully tracked and insured.
Stack kit enabled seamless stacking of our Catalyst 9200 switches with stable bandwidth.
Improved redundancy and simplified management across our access layer.
Reliable stacking performance with easy installation.
Professional accessory that enhances network resilience and scalability.
Consistent stack connectivity and dependable switch synchronization.
The Cisco C9200-STACK-KIT is a StackWise stacking kit for compatible Cisco Catalyst 9200 switches. It adds the physical stack hardware needed to link C9200 members into a single switch stack. The kit is used when access switches need unified management, stack-wide resiliency, and higher port density without managing each Catalyst 9200 switch as a separate standalone device.
C9200-STACK-KIT identifies a Cisco Catalyst 9200 stacking kit. The C9200 prefix points to Catalyst 9200 switches, while STACK-KIT indicates the accessory bundle used for StackWise stacking. This model is separate from C9200L-STACK-KIT, which is designed for Catalyst 9200L switches and supports a different StackWise bandwidth profile.
C9200-STACK-KIT is a network stacking accessory, not a switch, uplink module, power supply, or optical transceiver. It provides the physical stack adapters and stack cable required to connect supported Catalyst 9200 switches through their StackWise ports. Buyers normally order it alongside compatible C9200 access switches during new deployments, expansion projects, or stack rebuilds.
C9200-STACK-KIT sits in the Cisco Catalyst 9200 accessory lineup for modular Catalyst 9200 access switches. It supports StackWise-160 on C9200 models, while C9200L-STACK-KIT supports StackWise-80 on Catalyst 9200L models. This makes C9200-STACK-KIT the correct stacking kit for standard C9200 switches that use modular uplinks and field-replaceable components.
C9200-STACK-KIT includes two data stack adapters and one data stack cable for compatible Cisco Catalyst 9200 switches. The included hardware creates the physical StackWise connection between stack members. Buyers should confirm the required cable length for the rack layout, because Cisco also lists separate STACK-T4-50CM, STACK-T4-1M, and STACK-T4-3M data stack cable options.
C9200-STACK-KIT supports Cisco Catalyst 9200 StackWise-160 operation. Cisco describes Catalyst 9200 StackWise-160 as providing up to 160 Gbps of stack bandwidth with Spatial Reuse Protocol in a full-ring design. The actual design depends on compatible C9200 switch models, proper adapter installation, stack cable layout, and Cisco IOS XE stack configuration.
C9200-STACK-KIT uses Cisco Catalyst 9200 data stack cabling, with STACK-T4-50CM listed as the default data stack cable supplied with the stack kit. Cisco also lists STACK-T4-1M and STACK-T4-3M cables for deployments that need longer spacing between stack members. Correct cable length keeps the stack clean inside the rack and avoids strain on stack ports.
A Cisco Catalyst 9200 switch stack supports up to eight stacking-capable switches connected through StackWise ports. C9200-STACK-KIT supplies the physical adapters and cable needed for compatible C9200 members. Network teams should keep the stack homogeneous, follow Cisco IOS XE stack rules, and avoid mixing unsupported models or mismatched license levels inside the same stack.
C9200-STACK-KIT uses the dedicated StackWise stacking connections on compatible Catalyst 9200 switches. It does not add Ethernet downlink ports, uplink ports, SFP slots, PoE capacity, or Layer 3 features by itself. Its role is physical stack interconnection, allowing multiple C9200 switches to operate as one logical system after the stack hardware and IOS XE configuration are in place.
A Catalyst 9200 stack using C9200-STACK-KIT is managed through Cisco IOS XE as a single logical switch system. The active switch controls stack-wide operation, while member switches participate under the same management plane. Network teams configure global settings, interfaces, EtherChannel links, VLANs, routing features, and monitoring from the active stack member instead of managing every unit separately.
C9200-STACK-KIT is used to build a Catalyst 9200 access switch stack for higher port density, unified administration, and stack-level resiliency. It is commonly deployed in wiring closets where multiple 24-port or 48-port C9200 switches serve endpoints and uplink to distribution. The stack kit helps reduce standalone switch management while preserving the physical flexibility of separate chassis.
C9200-STACK-KIT fits access-layer environments where one Catalyst 9200 switch is not enough for the required endpoint count or redundancy plan. It suits small to midsize network closets, branch access blocks, and campus edge deployments using C9200 switches. The stack size scales up to eight compatible members, subject to Cisco stacking rules and the site’s uplink design.
C9200-STACK-KIT suits endpoint access scenarios with phones, workstations, wireless access points, cameras, printers, and other wired devices connected through Catalyst 9200 switches. It supports designs where traffic from several physical switches needs one managed stack and coordinated uplinks. The kit is especially useful when cross-stack EtherChannel, simpler operations, and access closet growth are part of the design.
C9200-STACK-KIT fits access-layer deployment because Catalyst 9200 switches are commonly used at the campus or branch access edge. The kit connects multiple C9200 members into one StackWise-160 system before traffic is handed northbound through uplink modules. This improves operational control in access closets and keeps endpoint-facing switch growth under a single management model.
C9200-STACK-KIT is designed for Cisco Catalyst 9200 C9200 SKUs only. Compatible families include standard Catalyst 9200 models such as C9200-24P, C9200-24T, C9200-48P, C9200-48T, C9200-24PXG, and C9200-48PXG variants. Buyers should verify the exact switch SKU, installed IOS XE release, stack cabling plan, and license consistency before ordering the stack kit.
C9200-STACK-KIT is not the correct stack kit for Cisco Catalyst 9200L switches. Cisco lists C9200L-STACK-KIT for C9200L SKUs only, while C9200-STACK-KIT is for C9200 SKUs only. This distinction matters because Catalyst 9200 supports StackWise-160, while Catalyst 9200L supports StackWise-80 with its own stacking accessory kit.
C9200-STACK-KIT provides the physical stack connection, while Cisco IOS XE manages the Catalyst 9200 stack as one logical system. The switch stack also fits Cisco Catalyst Center managed environments when the installed switch models, software, and licensing align with the network design. The kit itself does not run software, but it enables the stacked switch operating model.
C9200-STACK-KIT does not add a separate software license by itself. The licensing considerations sit on the Catalyst 9200 switches in the stack, such as Network Essentials, Network Advantage, Cisco DNA Essentials, or Cisco DNA Advantage. Stack members should use compatible license levels, because Cisco stacking guidance restricts mixed license levels inside a switch stack.
C9200-STACK-KIT is for standard Cisco Catalyst 9200 C9200 switches and supports StackWise-160 operation. C9200L-STACK-KIT is for Catalyst 9200L C9200L switches and supports StackWise-80 operation. The two kits are not interchangeable ordering choices. Buyers should match the stack kit to the switch family printed in the SKU before comparing price or availability.
C9200-STACK-KIT is the complete stack kit bundle with two data stack adapters and one data stack cable. STACK-T4-50CM is a 50 cm data stack cable listed separately and also identified as the default cable with the stack kit. Buyers needing the adapters should order C9200-STACK-KIT, while replacement or additional short cabling points to STACK-T4-50CM.
C9200-STACK-KIT supplies the stack adapters and a data stack cable for Catalyst 9200 stacking. STACK-T4-1M is a separate 1 m data stack cable used when the physical rack spacing needs more cable length than the default 50 cm option. The stack kit handles the full hardware bundle, while STACK-T4-1M addresses cable-length planning.
C9200-STACK-KIT is the Catalyst 9200 StackWise-160 kit used to equip switches for stacking. STACK-T4-3M is a separate 3 m data stack cable for wider spacing between members. Buyers should use C9200-STACK-KIT when adapters are required and select STACK-T4-3M only when a longer approved stack cable is needed for the rack design.
C9200-STACK-KIT price depends on condition, quantity, availability, and whether the order is for new, refurbished, or bulk supply. ORM Systems quotes pricing against the exact Cisco SKU so buyers receive the correct StackWise-160 kit for C9200 switches. Requesting a quote with target quantity, delivery country, and required lead time gives the most accurate price.
C9200-STACK-KIT is typically sourced in new and refurbished conditions through enterprise hardware resellers, subject to live availability. Refurbished units should be checked for correct adapters, correct data stack cable, clean connector condition, and matching Cisco part identity. Buyers should specify condition preference when requesting a quote so pricing and lead time are aligned from the start.
C9200-STACK-KIT status should be checked against the latest Cisco lifecycle notices before purchase, because lifecycle status changes over time. The kit is tied to the Catalyst 9200 platform, which remains a widely deployed access switch family. ORM Systems quotes against current channel availability and helps buyers confirm whether new, refurbished, or replacement sourcing is the better route.
C9200-STACK-KIT lead time depends on stock location, order size, requested condition, and destination country. Smaller single-kit orders usually move faster when stock is already allocated, while bulk stack refreshes need availability confirmation. Buyers should provide quantity, delivery postcode or country, and required date so ORM Systems returns a realistic lead time with the quote.
Bulk discounts are available for C9200-STACK-KIT when multiple stack kits are ordered for access closet builds, switch refresh projects, or spare pool planning. Pricing improves when the requested quantity, condition preference, and delivery schedule are clear. ORM Systems supports volume quotation for Catalyst 9200 accessories, including stack kits and related STACK-T4 cable options.
ORM Systems provides warranty options for C9200-STACK-KIT based on condition, sourcing route, and quote terms. New and refurbished Cisco accessories are supplied with clear warranty information before purchase. Buyers should confirm whether the order needs standard reseller warranty, extended coverage, or project-specific support terms, especially when the stack kit is part of a larger Catalyst 9200 deployment.
Refurbished C9200-STACK-KIT stock should be inspected for correct Cisco part identity, adapter condition, cable condition, connector integrity, and complete kit contents before dispatch. Testing focuses on ensuring the adapters and data stack cable are suitable for Catalyst 9200 stack installation. This helps reduce deployment delays caused by missing kit components or incorrect accessory substitution.
C9200-STACK-KIT is a Cisco stacking accessory designed for use with Catalyst 9200 switches, so compliance review normally follows Cisco documentation for the host switch platform and supported accessories. Buyers with audit requirements should retain Cisco part details, serial records where available, invoice documentation, and the relevant Catalyst 9200 data sheet or installation guide for procurement records.
C9200-STACK-KIT is installed physically through the data stack adapters and stack cable, then the Catalyst 9200 stack is configured in Cisco IOS XE. Network teams verify stack member discovery, assign switch numbers or priorities where needed, check ring status, and confirm the active member. Interface, VLAN, uplink, and routing configuration then proceeds at stack level.
C9200-STACK-KIT does not need separate accessory software. Stack operation is handled by the Cisco Catalyst 9200 switches running Cisco IOS XE. The switches must run a compatible software release and follow Cisco stack configuration rules. The kit’s job is physical connectivity, while member election, stack control, configuration, and monitoring are handled by the switch software.
C9200-STACK-KIT requires compatible Catalyst 9200 switches, the supplied data stack adapters, an approved data stack cable, and a planned cable path between stack members. Larger racks sometimes need separate STACK-T4-1M or STACK-T4-3M cables. Engineers also need console or management access to Cisco IOS XE for stack verification, member numbering, and operational checks.
Buyers can purchase C9200-STACK-KIT from ORM Systems for UK Catalyst 9200 stack deployments, replacement stock, and project-based procurement. ORM Systems quotes the exact Cisco SKU, condition, quantity, and delivery requirement so buyers avoid ordering the C9200L version by mistake. The quote process also supports related stack cables and compatible Catalyst 9200 accessories.
ORM Systems ships C9200-STACK-KIT internationally, subject to stock, destination, courier availability, and export requirements. International buyers should provide the delivery country, target delivery date, quantity, and preferred condition when requesting pricing. This allows the quotation to include the correct Catalyst 9200 stack kit, shipping option, and any project timing considerations before the order is placed.
United States
